• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.2
• /
• pp.115-122
• /
• 2017

Objectives: This study was designed to evaluate the changes in the particle filtration efficiencies of five cloth masks (4 plate types, 1 cup type) with an increasing number of machine washings and the degree of cloth expansion. Methods: NaCl aerosols were generated using an atomizer and passed through cloth masks in a dynamic aerosol chamber. Particle concentrations were measured both before and after for the cloth masks using an optical particle counter (OPC) in the size range of $0.3{\sim}10{\mu}m$. Results: In the original condition, the filtration efficiencies of the five cloth masks were A: 20.1%, B:30.9%, C: 25.0%, D: 26.5%, and E: 40.9%. As the number of washings increased in the order of one, two, and four times, the filtration efficiencies of cloth mask C increased. The filtration efficiency of A, D, and E increased after the first washing. With the exception of B, the filtration efficiency of cloth masks increased after the second washing and those of all cloth masks increased after the fourth washing. This might be caused by the fibers untangling from the yarn and being freed at one end. In this status, the packing density of the textile will not change, but the distances between fibers will increase, which might bring about an increase in filtration efficiency. When the cloth masks were extended by 10% and 20% in one direction, the filtration efficiencies of cloth masks B, D, and E decreased at 10% extension, and those of all cloth masks decreased at 20% extension. When the cloth masks were expanded by 10% and 20% in two directions, the filtration efficiencies of all cloth masks decreased by at least 34.7% at 10% extension, and by at least 60.9% at 20% extension Conclusions: The filtration efficiency of cloth masks could decrease after one to two machine washings, but will increase after four washings in comparison with their original performances. The filtration efficiency of cloth masks will decrease when they are expanded, such as when stretching over the nose during wearing status.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.285-291
• /
• 2020

There is a growing interest in breast augmentation surgery, which can most effectively maximize femininity, among modern women around the world. However, breast augmentation surgery is considered one of the most terrifying surgeries many women are afraid of, as many cases of its side effects have been reported. As a way to provide a complementary method to deal with it, this study investigated the effects of a non-surgical breast enhancement program by stretching soft tissue of the breast. According to the results, there was no change in body weight and breast elasticity, but there were marked increases in breast cup size, breast diameter and volume of the women who used this program. The external soft tissue expansion system was found to be effective in Korean women's change of breast shape. On the other hand, users should use this system regularly for some period of time, and this would limit their social activities. Therefore, for the effective use of this system, its users should make individual efforts.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.290-299
• /
• 2014

This research sought to analyze the characteristics of breast movement at the treadmill activity levels. It also examined the effect of wearing a sports bra in reducing breast displacement. The subjects for the data collection were females in their 20s (n=2) with C-cup size breast. The experimental conditions were three different moving speeds (4 km/h, jogging: 7 km/h, and sprinting: 10 km/h) and two types of sports bras. Three dimensional breast displacement was measured. The displacement of the right nipple point was measured with a 3D motion analyzer. The results show that the breasts were greatly displaced from the walking speed (4 km/h) when subjects did not wear any bra. Whereas their breast displacement distance decreased remarkably when they wore sports bras. The nipple point moved 42~44 mm in the vertical direction at walking speed with naked condition. But it was reduced by 80% after wearing sports bras. When subjects running (7 km/h, 10 km/h) without any bra, the nipple point moved 122~141 mm. However it was reduced by 60~70% when they wore sports bras. The apartment time (time delay) between at the highest point of the upper body and the nipple was 0.25 seconds at the running speeds (7 km/h, 10 km/h) without wearing any bra. After wearing sports bras, the time delay was cut to 0.06~0.12 seconds. These results implies that without wearing any bra the skin surrounding the breasts might be seriously pulled at running activity. The functional sports bra suppress breast movement. It might prevent the sagging of breasts by preventing the damage of the Cooper's ligaments.

• Advances in biomechanics and applications
• /
• v.1 no.2
• /
• pp.95-109
• /
• 2014

Peri-acetabular bone ingrowth plays a crucial role in long-term stability of press-fit acetabular cups. A poor bone ingrowth often results in increased cup migration, leading to aseptic loosening of the implant. The rate of peri-prosthetic bone formation is also affected by the polar gap that may be introduced during implantation. Applying a mechano-regulatory tissue differentiation algorithm on a two-dimensional plane strain microscale model, representing implant-bone interface, the objectives of the study are to gain an insight into the process of peri-prosthetic tissue differentiation and to investigate its relationship with implant-bone relative displacement and size of the polar gap. Implant-bone relative displacement was found to have a considerable influence on bone healing and peri-acetabular bone ingrowth. An increase in implant-bone relative displacement from $20{\mu}m$ to $100{\mu}m$ resulted in an increase in fibrous tissue formation from 22% to 60% and reduction in bone formation from 70% to 38% within the polar gap. The increase in fibrous tissue formation and subsequent decrease in bone formation leads to weakening of the implant-bone interface strength. In comparison, the effect of polar gap on bone healing and peri-acetabular bone ingrowth was less pronounced. Polar gap up to 5 mm was found to be progressively filled with bone under favourable implant-bone relative displacements of $20{\mu}m$ along tangential and $20{\mu}m$ along normal directions. However, the average Young's modulus of the newly formed tissue layer reduced from 2200 MPa to 1200 MPa with an increase in polar gap from 0.5 mm to 5 mm, suggesting the formation of a low strength tissue for increased polar gap. Based on this study, it may be concluded that a polar gap less than 0.5 mm seems favourable for an increase in strength of the implant-bone interface.

• Journal of Fashion Business
• /
• v.13 no.3
• /
• pp.118-135
• /
• 2009

This study is done in Shanghai area by sample survey of female college students. Through direct contact survey, this study collected and analyzed information on figure to understand feature of breasts and measurements of body to provide base information to improve product of brassiere for adult female in China. Data was analyzed by using SPSSWIN 13.0 Program and SAS 9.0. 1. From a result of analysis on the body measures to understand the characteristics of the shape of the breast of the Chinese female college students(18$\sim$24 years old), the bust circumference was 83.86cm and the underbust circumference was 73.37cm and the cup size of a brassiere was 75A. 2. From a result of analysis on the bust measures to understand the relations between the front, lateral and cross-sectional proportions of the bust and the shape of the breast in the Chinese female college students, the chest height was 0.77, the bust height was 0.71 and the underbust height was 0.68 as the information of the body type that shows the location of the bust that is the measure of an item to a height as the front proportion of the bust. For the lateral proportion of the bust, the chest depth of the waist depth was 0.98, the bust depth, 1.21 and the underbust depth, 1.03. While the bust depth/waist depth is ideal when being 1.3, it was 1.21 in this study to be close to the ideal lateral shape. For the cross-sectional proportion of the bust, the area of the largest evenness was the bust followed by the waist, underbust and chest in order. 3. From a result of analysis on the correlation between measured items necessary to understand the characteristic of the shape of the breast, to set up the sizes and to produce the patterns, the underbust circumference had a relatively high correlation between the items of breadth, depth and circumference and weight as the items of basic areas.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.449-452
• /
• 2008

Flow difference between reacting and non-reacting case in a swirl stabilized annular combustor is investigated using 3D Large Eddy Simulation with flamelet turbulent combustion model. The combustor of concern is the LM6000, lean premixed dry low-NOx annular combustor, developed by GEAE. Boundary conditions are based on experimental data. Heat release as a result of combustion put the dilatation of density in primary combustion zone highly increased so that the main swirl stream behind of a swirl cup stretched further downstream than that of non-reacting case. The oval shape of core flow in cross-section to flow direction, which clearly observed in non-reacting case, tends to be circle, and small vorticities in wide range in non-reacting case disappears, but the size of iso-vorticity increase in reacting case.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.480-487
• /
• 2019

This study used 3D technology to develop a multi-functional sports brassiere with increased comfort and fit that can be worn as a base layer during exercise or as underwear. A 75A size industrial lingerie figure was used to develop a standard pattern. 3D tools for scanning and pattern making, such as Vivid 910, Geomagic Design X, 2C-AN and Yuka CAD were used. The sports brassiere was designed as a tank top style with dual structure and linings attached to a pad utilized with a sport brassiere mold cup. 3D outer and lining's pattern was differently developed in consideration of the body's curvature with pad's shape and structure. Shoulder and neck part reduction rates were adjusted to increase the neck areas fit that considered the nude pattern's structure due to uncomfortableness felt by wearers who were uncomfortable with the neck areas fit on existing brand products. The reduction rate was also set differently on each part. For example, the reduction rate on outer side panel was set strongly to increase the breast's volume. Two products, developed by a 3D sports brassiere and previously released product, were worn on 8 subjects in their 20's to evaluate fit, comfort, and purchase preferences. The evaluation proved that newly developed 3D products were superior to comparative products. The results of the clothing pressure measurement indicate that the newly developed sports brassiere's front part had less pressure on upper bust and shoulder areas compared to comparative products as well as showed less pressure on the back side, which shows improved wearing comfort compared to comparative products.

• Journal of Periodontal and Implant Science
• /
• v.49 no.4
• /
• pp.206-214
• /
• 2019

Purpose: The purpose of this study was to examine the association between the intake of semi-solid yogurt and periodontitis in Korean adults using a national database. Methods: The data analyzed in this study are a subset of the sixth Korean National Health and Nutrition Examination Survey conducted in 2015 by the Korea Centers for Disease Control and Prevention. The sample size for this study was 4,727. We collected data on sociodemographic characteristics, oral health-related variables, oral and general health status, and intake of semi-solid yogurt. Semi-solid yogurt intake (YI) was calculated by multiplying the frequency of YI over the previous week by the average intake per serving. We assessed periodontal conditions using the Community Periodontal Index (CPI) and defined periodontitis as a CPI score ${\geq}3$. Multivariate logistic regression analyses were performed after adjusting for sociodemographic variables, and oral and general health behaviors and status. Results: The mean weekly YI among those without periodontitis ($1.03{\pm}0.06cups$) was significantly higher than among those with periodontitis ($0.77{\pm}0.08cups$) (P<0.001). Individuals who consumed more than 2 cups of yogurt per day were 76% less likely to have periodontitis than those who consumed less than 1 cup of yogurt per week after adjusting for all covariates (odds ratio, 0.24; 95% confidence interval, 0.10-0.60). Conclusions: We found a significant association between increased intake of semi-solid yogurt and periodontal health. We therefore recommend daily consumption of semi-solid yogurt as a probiotic to improve periodontal health. Further longitudinal studies are required to elucidate plausible mechanisms through which probiotics impact periodontal disease, considering both periodontal pathogens and clinical periodontal parameters.

• Human Ecology Research
• /
• v.57 no.2
• /
• pp.159-170
• /
• 2019

The growth accelerator period from a child's body into an adult body is a huge transition characterized by rapid growth in the near term. Body shape changes at this time of growth should be continually studied because they can result in different outcomes due to various variables. This study is basic study for the production of a junior brassiere patternmaking was conducted to separate the upper torso and breasts of adolescents by growth level. Analysis was conducted by age classification according to sales trends. In this study. 3D body shape data of Korean girls, Based on the 6th Size Korea data, analyzed statistically the upper body and breast according to the rate of growth. The results of this study represent the basis for the development of a junior brassiere to help lead a better life in regards to clothing. The study used 3D-data from girls aged 13 to 18. The analysis indicates that the upper body is in a different shape at age 15 with an increasing circumference, width and shoulder length of the chest; in addition, the sides are analyzed differently, suggesting that the brassiere configuration should be made differently at age 15. The breast form also showed different growth patterns at age 13 and the result was that the shape of the cup in brassiere should be configured differently depending on type.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.3
• /
• pp.232-240
• /
• 2022

A variable vacuum capacitor (VVC), which is a variable element, is used to match impedance in plasma that changes with various impedance values, and its use is expanding with the rapid growth of the semiconductor business. Since VVCs have to secure insulation performance and vary capacitance within a compact size, electrode design and manufacturing are very important; thus, various technologies such as part design and manufacturing technology and vacuum brazing technology are required. In this study, based on the model of an advanced foreign company that is widely used for impedance matching in the manufacture of semiconductors and displays, a VVC that can realize the same performance was developed. The electrode part was designed, the consistency was confirmed through analysis, and the precision of capacitance was improved by designing a cup-type electrode to secure the concentricity of the electrode. As a result of the evaluation, all requirements was satisfied. We believe that self-development will be possible if satisfactory responses are received through evaluation by VVC consumers in the future.