• The Research Journal of the Costume Culture
• /
• v.11 no.3
• /
• pp.447-457
• /
• 2003

The shape of womens breast is the most important part of body silhouette. For the high-fitted clothes, in particular, more refined brassiere effective enough to show the beautiful line of female breast is asked. This study focuses on comparing the difference of the two different textiles of brassiere as to their effectiveness as a brassiere. The Stockman Lingerie Mannequin made by England is used for the draping method for the brassiere pattern. Two different brassieres of stretchable and unstretchable(cotton) textiles respectively were made out of this pattern, and the difference of effectiveness wearing the two brassieres was compared. 30 females ranging in the ages of 19 through 24, and whose size is 75A were selected as the test group who are to wear them. The result of each measurement proves that the cotton brassiere is more effective than the stretchable brassiere as a whole considering center concentration of breast, projection of breast, and bust up function. The result of the test on satisfaction of wearing brassiere was also in favor of cotton brassiere as to projection effect, bust up effect, making a good shape of bust. For the cup, in particular, unstretchable textile is more effective for making a breast look better.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.185-195
• /
• 1998

A new blank design method is proposed to predict the optimum initial blank shape in the sheet metal forming process. The rollback method for blank shape design takes the difference between final deformed shape and target contour shape into account. Based on the method, a computer program composed of blank design module, FE-analysis program and mesh generation module is developed. The rollback method is applied to square cup drawing process with the flange of unifiorm size around its periphery to confirm its validity. The optimum initial blank shape is obtained from an arbitrary square blank after three modifications. Good agreements are recognized between the numerical results and the published results for initial blank shape and thickness strain distribution. The optimum blank shape for two parts of automobile sub-frame is designed. The thickness distribution and the level of punch load is improved. Also, the method is applied to design the weld line in the tailor-welded blank. It is concluded that the rollback method is an effective and convenient method for an optimum blank shape design.

• Korean Journal of Human Ecology
• /
• v.18 no.6
• /
• pp.1267-1276
• /
• 2009

The purpose of this study is to classify breast types and to inquire about characteristics depending on breast types of women subjects in their twenties. We researched size items affecting breast volume and regression equations for the prediction of breast volume, and thereby, we will be able to provide some basic data, useful to the development of the brassiere depending on breast types. As a result of categorizing the types of three breast types, "type 1" was characterized by big and greatest protrusion of the breast with large breast volume and a large bust, while "type 2" was characterized by flat breasts with the least breast volume and least bust, and "type 3" was characterized by breast location apart from the center front line. Breast volume is significant in establishment of the brassiere cup depending on breast type. Five items such as, the circumference of the breast, the length of the upper breast, the depth of the breast point, the length of the shoulder point-breast point, and the length of the inferior breast were extracted through regression equations for breast volume.

• Near Infrared Analysis
• /
• v.1 no.2
• /
• pp.35-39
• /
• 2000

The purpose of this research was to find out suitable soil sample preparation and sample holding tools for NIR reflection radiation for estimating soil components. NIR reflectance was scanned at 2nm intervals from 1,100 to 2,500nm with an InfraAlyzer 500(Bran+Luebbe Co.). Coarse(2.0mm) and fine(0.5mm) soil sample and various sample holding tools were used to obtain mean diffuse reflection of the soil for the calibration and validation of the calibration set in estimating moisture, organic matter and total nitrogen of the soils. Multiple linear regression was used to obtain the best correlation of NIR spectroscopy method. Correlation of NIR spectroscopy method. Correlation of NIR spectra for finely and coarsely sized soil did not show much difference. The standard errors of prediction(SE) using different types of sample holding tools for organic matter, total nitrogen and soil moisture were better than 0.765, 0.041 and 0.63% respectively. From the results it can be concluded that NIR spectroscopy with flow type cell could be used as a fast routine testing method in quantitative determination of organic matter, total nitrogen and soil moisture.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.1
• /
• pp.30-36
• /
• 2014

BACKGROUND: Best management practices are often implemented to control nonpoint source pollutants. Best management practices need to be simulated and analyzed for effective Best management practices implementations. Filter strip is one of effective Best management practices in agricultural areas. METHODS AND RESULTS: Soil and Water Assessment Tool model was selected to explore the effectiveness of filter strip to control total phosphorous in Golji watershed. Soil and Water Assessment Tool model was calibrated for flow and total phosphorous by Sequential Uncertainty Fittin ver.2 algorithm provided in Soil and Water Assessment Tool-Calibration and Uncertainty Procedures. Three scenarios defined by filter strip width were applied. The filter strip width of 5 m was able to reduce the most amount of total phosphorous. In other words, the total phosphorous reduction by filter strip of 5 m was 28.0%, while the reduction was 17.5% by filter strip of 1 m. However, the reduction per unit filter strip width were 17.4%, 8.0%, and 4.5% for 1 m, 3 m, and 5 m of filter strips, respectively. CONCLUSION: Best management practices need to be simulated and analyzed so that the BMP scenario can be cost-effective. A large size of BMP might be able to control large amount of pollutants, however it would not be indicated as a cost-effective strategy.

• Journal of the Korean Dietetic Association
• /
• v.11 no.4
• /
• pp.405-417
• /
• 2005

The purpose of this study was to evaluate students' satisfaction with foodservice of middle school by region in Gangwon province. Students’ satisfaction concerning foodservice quality characteristics was surveyed by using importance performance analysis(IPA) technique in middle school foodsevice operations. Middle school students from four cities(Gangnung, Sokcho, Wonju, Chuncheon) were surveyed by self-developed questionnaire. Total of 1,025 questionnaires(female 521 and male 504 respectively) were analyzed using SAS program. The results of this study are summarized as follows: 1.The performance level of foodservice quality attributes was significantly different according to region. 2.The attribute of the highest performance level was taste of food. The attributes of the lower performance level were waiting time of meal service and treatment about complaints. The attributes of the higher importance level were hygiene of food and dining room and hygiene of spoon and cup and drinking water table. 3.Satisfied quality attributes identified were taste of food and variety of menu. Dissatisfied quality attribute identified was treatment about complaints. 4.The satisfaction of middle school lunch service was lower than their elementary school period. 5.The satisfied quality attributes of middle school foodservice were portion size, facility of dining room, hygiene of food, variety of menu compared with their elementary school period.

• Transactions of Materials Processing
• /
• v.31 no.5
• /
• pp.290-295
• /
• 2022

Recently, the use of high-tech ceramic parts in functional electronic parts, automobile parts and semiconductor equipment parts is increasing. These ceramics materials are required to have high reproducibility, reliability, large size and complex shapes. The researchers initiated the work to develop a new shaping method called gel casting, which allows high performance ceramic materials with a complex shape to be produced. The manufacturing process parameters of gel casting include uniform mixing of the initiator, bubble removal, and slip injection. In this study, we analyzed the dispersion and gelation characteristics according to the change in the additive content of the alumina slurry in the gel casting process. The alumina slurry for gel casting was prepared by mixing a solvent, a monomer and a dispersant through a ball mill. Alumina powder and a gelation initiator were added to the mixed solution, and ball milling was performed for 24 hours. A viscosity of 6,435 cps and a stable zeta potential value were obtained under the conditions of alumina powder content of 55 vol% and dispersant 2.0 wt%. After curing for 12 hours by adding aps 0.1wt%, TEMED 0.2wt%, and Monomer 3, 5wt%, it was possible to separate from the molding cup, confirming that the gelation was completed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.3
• /
• pp.104-109
• /
• 1981

The experiment was designed to measure splash erosion and to investigate the relationships between soil detachment, kinetic energy and C factor at various soils and crops under the natural rainfall, using the modified Ellison cup. The results obtained were as follows: 1. Splash erosion increased as the texture was coarser, reaching a maximum amount in loamy sand of 12.6ton/10a/year, 9.7ton for loam, 9.0ton for sandy loam, and 7.0ton for clay loam. 2. Splash erosion positively related to kinetic energy ($EI_{30}$) but negatively to K value. 3. A considerable relationship between splash erosion and kinetic energy was observed under coverage less than 50%; however, it decreased with increasing canopy resulting in no relation over 90% coverage. The amount of soil detachment by natural rainfall ranged from 10 to 15ton/10a at various cropping systems. 4. The particle size distribution of splashed soil was similar to that of original one and fine sand($250-100{\mu}$) marked the highest detachment and splash.

• Journal of Acupuncture Research
• /
• v.26 no.6
• /
• pp.101-110
• /
• 2009

Objectives : We developed and proposed a guideline for safety and performance assessment of electric cupping apparatus(Class 2 medical device). Methods : We drafted the guideline for safety and performance assessment of electric cupping apparatus by referring the existing standards and guideline, based on online questionnaire for Korean medical doctors and measurement data from commercially available products. Physical dimension of cups and inner vacuum pressure were acquired for the measurement in order to achieve the purposes. Results : This guideline only can be applied to electric cupping apparatus for enhancing blood circulation by employing negative pressure generated by electricity. Seven items of appearance and label, operation test of pump, variation test of input electricity, vacuum level test, vacuum sustain test, cup-size dependent test, noise level test are suggested for evaluation subjects and methods required for electric cupping devices. Requirements for the design and development of electric cupping devices are suggested: vacuum level indicator, vacuum generation rate, pressure control, valve detachment stability, cup comparability, safety measure, surge protection, user friendliness, instruction for use (IFU). Conclusions : We proposed a guideline for safety and performance assessment of electric cupping apparatus to improve the quality of relating products and aid the commercialization of them, by aiming higher industrial competitiveness of the medical device sectors in Korea. Discussion with related institutes such as industry, academy and government is further required. Public hearings also need to be held prior to the establishment of a final guideline and standard.

• Conservation Science in Museum
• /
• v.7
• /
• pp.53-62
• /
• 2006

The wooden armor frame and various lacquerware artifacts excavated from the low swamp remains in Imdang, Gyeongsan have very weak material and lacquer coating; in case they are exposed in the air, they are likely to be shrunken and deformed immediately. The wooden armor frame has large size and it might be dissolved during freeze-drying. The lacquer coating of lacquerware blocks the penetration of chemicals and it is very likely to swell or peel off during the treatment. Therefore, to prevent the dissolution during vacuum freeze-drying, the wooden armor frame was replaced with t-butanol and impregnated in t-butanol solution with PEG#3, 350 43%, and lacquerware was impregnated in PEG#3, 350 40% solution at room temperature and freeze-dried. According to the analysis of the lacquer fragment from the lacquerware, the lid and the mounted cup was pasted with the mixture of lacquer and black pigment (soot) on the base layer after the first coating and pasted two or three times more with natural lacquer; the red lacquered wooden cup was pasted with the mixture of lacquer and black pigment on the base layer and pasted once on the middle layer. The top lacquer (red) was pasted with the mixture of iron oxide(Fe₂O₃).