• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.4 s.163
• /
• pp.633-645
• /
• 2007

The purpose of this study is to develop brassiere patterns which are both fitting and functional for women aged 19 to 24(the 1924 generation). We suggested a 'size chart for body measurements' for constructing basic brassiere patterns with six sizes of '70, 75', 'AA, A, B cups', which are used most frequently by the 1924 generation consumers. The scope of research was in reference to the statistical analysis results of the Size Korea(2004) body measurements and the results of the data from the preceding research. The 'drafting method for constructing basic brassiere patterns for the 1924 generation consumers' was completed by selecting a total of 18 subjects, 3 for each six sizes in the scope of research, and three wearing tests were carried out with the subjects. We compiled one brassiere pattern in six sizes obtained with the drafting method of constructing a basic brassiere pattern on another by block pattern in order to observe the phase of change in dimensions and shapes of paper pattern. The result was converted into the variations of a x-axis and a y-axis, and we suggested 'Size Grading Rule' and 'Cup Grading Rule' for the basic brassiere patterns. As the results of the wearing evaluation of the basic brassieres and measuring the variation in body dimensions by wearing brassieres, the dimensions and shapes of the basic brassieres suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

• Research in Plant Disease
• /
• v.9 no.1
• /
• pp.28-31
• /
• 2003

A sclerotinia rot was occurred on the stems of Obedient plant (Physostegia virginiaqna) grown in the exhibition field of Gyeongsangnam-do Agricultural Research and Extension Services, Korea in 2002. The typical symptoms of the disease were that the infected leaves and stems, at first, became dark green, then watery and soft rotted, later, White fluffy mycelia formed on the lesion developed black sclerotia, later, Sclerotia formed on the plants and PDA medium were globose to cylindrical or irregular in shape and 1.0~10.3$\times$1.0~8.4 mm in size. Aphothecia were cup-shape with numerous asci and 0.8~1.8 cm in diameter, Asci were cylindrical in shape and 84~286$\times$4.7~26.3 ${\mu}{\textrm}{m}$ in size. Ascospores were one cell hyaline, ellipsoid to ovoid in shape, and 7.6~12.8$\times$3.4~6.2 ${\mu}{\textrm}{m}$ in size. The optimum temperature far mycelial growth was $25^{\circ}C$. This is the first report on the sclerotinia rot of Physostegia virginiaqna caused by Sclerotinia sclerotiorum in Korea.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.122-124
• /
• 2006

Sclerotinia rot was occurred on the leaf and stem of Fatsia japonica in Geoje city, Gyeongnam province in Korea from 2004 to 2005. The typical symptom of the disease was water-soaked infected leaves and stems. The colony of the isolated fungus was white to faintly gray in color. Apothecia were cup-shaped with numerous asci and $0.8{\sim}1.3 cm$ in size. Asci were cylindrical in shape and $70{\sim}220{\times}4{\sim}18{\mu}m$ in size. Ascospores were aseptate, hyaline, ellipsoid in shape, and $6{\sim}12{\times}4{\sim}6{\mu}m$ in size. Sclerotia formed on the plants and PDA medium were globose to cylindrical or irregular in shape, black in color. The optimum temperature for mycelial growth was $25^{\circ}C$. This is the first report on the Sclerotinia rot of Fatsia japonica caused by Sclerotinia sclerotiorum in Korea.

• Research in Plant Disease
• /
• v.27 no.3
• /
• pp.115-119
• /
• 2021

Sclerotinia rot was occurred on the leaf and stem of Peucedanum japonicum Thunb. in greenhouse field of Pohang city of Gyeongbuk province in Korea. The typical symptom of the disease was light brown spot and tipburn on infected leaves. The colony of the isolated fungus was white to light gray in color. Asci were cylindrical shape and 75-240×5.9-17.3 ㎛ in size. Apothecia were cup-shaped with numerous asci and 0.5-0.9 cm in size. Ascospores were aseptate and ellipsoid in shape, and 8.4-10.7×4.8-5.8 ㎛ in size. Sclerotia formed on the plants and potato dextrose agar medium were globose to irregular in shape and black in color. Partial sequencing of rDNA of this isolate showed that it was 100% consistent with that of Sclerotinia sclerotiorum. It was confirmed that the same lesion was formed by reinoculating this pathogen on a healthy P. japonicum Thunb. and the same strain was isolated. This is the first report on the Sclerotinia rot of P. japonicum Thunb. caused by S. sclerotiorum in Korea.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.72-86
• /
• 2008

This research focused on determining the brassiere preference index and wearing status of chinese ladies in their 20's living in the Shanghai region of China, to help Korean lingerie companies in their development of bras to successfully advance into the Chinese lingerie market. The main research tool of this research was various different surveys, and the results of the surveys were evaluated using the SPSS 12.0 for Window program. The results of the survey can be summarized as: 1) consciousness and satisfaction level of the body. The satisfaction level of the brest was proportionate to the size of the brassiere, thus, people showed higher level of satisfaction for cone-shaped, semi-circular shaped, prominent-shaped(exposing), lifted-shaped brest over flat-shaped brest. Concerning the relationship between the shape of the brest and the age of the customers, people under 22 years of age preferred flat-shaped, and those between 23-24 years of age preferring exposing and lifted brest, thus as females mature and get older, the size of their brest increases, thus having preference on more circular and lifted-shaped brest and bras. 2) Status of bra wearing in China When we look at the size of the bra in relation to the shape of the brest, those classified as having 'flat-shaped' brest showed a high proportion of A-cups, ranging from 75A, 70A and 80A, where as those of 'cone-shaped' brest represented high ration of B-cups, ranging from 75B, 75A and 80B. Majority of those classified as having 'semi-circular shaped' and 'prominent-shaped(exposing)' brest showed a high ration in the size 80 range. And vast majority of those classified into the 'lifted-shaped' brest group, were reported of having C-cup size bras. 3) Status of Bra Purchasing As people mature, the main reason behind choosing a bra was the actual design of the bra, where they emphasized the importance of aesthetic values. People classified as having 'flat-shaped' and 'cone-shaped' brest emphasized the importance of design and beauty, while those having 'semi-circular shaped,' 'prominent-shaped(exposing),' and 'liftedshaped' brest groups emphasized the importance of hygiene and the material(fabric) of the bra. This shows that when people have relatively smaller brest, they emphasize the importance of external appearance whereas when the size of the brest increases, they pay more attention to the function of the bra rather than the external appearance.

• Macromolecular Research
• /
• v.8 no.1
• /
• pp.6-11
• /
• 2000

In this study, we examined the charging behavior of chopped carbon fibers during electro-flocking process, which is one of the key processes of the novel technique for fabricating conductive polymer composite films. Short carbon fibers (CF) during electroflocking were electrically charged by the combined effect of contact charging, corona charging and tribocharging. The specific charge built on CF surface was measured by using Faraday cup method. Specific charge increased not only with increasing electric field strength and potential impressed to mesh electrode as expected from theoretical considerations in literature, but with decreasing mesh opening size due to the improved contact charging condition. However, CF length was found unexpectedly to influence the amount of CF specific charge due to the agglomerated nature of CF flocks leading to the change in charging conditions.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.3
• /
• pp.200-208
• /
• 2008

Total Hip Replacement(THR) is a surgical procedure that replaces a diseased hip joint with a prosthesis. A plastic or metal cup forms the socket, and the head of the femur is replaced by a metal ball on a stem placed inside the femur. Due to the various types and shapes of human hip joint of every individual, a selected commercial implant sometimes may not be the best-fit to a patient, or it cannot be applied because of its discrepancy. Hence extracting geometry parameters of hip joint is one of the most crucial processes in designing custom-made implants. This paper describes the framework of a methodology to extract the geometric parameters of the hip joint. The parameters include anatomical axis, femoral head, head offset length, femoral neck, neck shaft angle, anteversion, acetabulum, and canal flare index. The proposed system automatically recommends the size and shape of a custom-made hip implant with respect to the patient's individual anatomy from 3D models of hip structures. The proposed procedure creating these custom-made implants with some typical examples is precisely presented and discussed in this paper.

• Transactions of Materials Processing
• /
• v.7 no.3
• /
• pp.260-273
• /
• 1998

A new blank design method is proposed to predict the optimum initial blank shape in the sheet metal forming process. The rollback method for blank shape design takes the difference between final deformed shaped and target contour shape into account. Based on the method a computer program composed of blank design module FE-analysis program and mesh generation module is developed. The rollback method is applied to square cup drawing process with the flange of unifiorm size around its periphery to confirm its validity. The optimum initial blank shape is obtained from an arbitrary square blank after three modification. Good agreements are recognized between the numerical results and the published results for initial blank shape and thickness strain distribution. The optimum blank shape for two parts of automobile sub-frame is designed, The thickness distribution and the level of punch load is improved. Also the method is applied to design the weld line in the tailor-welded blank. It is concluded that the rollback method is an effective and convenient method for an optimum blank shape design.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.2
• /
• pp.270-276
• /
• 2003

Methodology was suggested to analyze breast volume, base area of breast bulk. and surface area of breast using the 3D measurement system. Thirty-seven middle-aged (30s-40s) women wearing 80A brassiere were participated in this study. Image of the upper body was captured by Phase-shifting moire. The posture of the subject was adjusted to get the full image of the right breast. Rapidform 2001 was used for the analysis of the images. The mean breast volume was 547.0㎤ and mean base area of breast bulk was 235. I$\textrm{cm}^2$ It was also found that the volume(r=0.169) and surface area of breast(r=10.242) were loosely correlated with the circumference difference between top and under breast. Therefore, it is noted that current selection criterion of cup size based on the difference in the two kinds of breast circumference is inadequate. The result of this study is expected to contribute to the design of ergonomic brassiere as well as surgical operations in the medical field.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.93-99
• /
• 2005

In this work, computer-aided process design is carried out to develop an optimal preform of a pressure vessel. Knowledge-based rules are employed to design the preform, and they are formulated using the handbooks of plasticity theories. In the FE-analysis, a commercial finite element code, ABAQUS was employed. Axisymmetric deep drawing of a hemisphere-bottomed cup has been analyzed fur various combinations of die design parameters. The length of the land of die, the clearance between punch and die and the clearance between the blank holder and die are optimized to minimize the forming load. The results of the simulations are verified with the experiments which are scaled down to one tenth of the actual size.