• 대한심미치과학회지
• /
• 제10권1호
• /
• pp.8-15
• /
• 2001

The Class III malocclusion classified in two types of Skeletal Class III and Pseudo Class III. In the case of the maxillary deficiency, the protraction H-G(facemask) with Bonded RPE can be used. For children with A-P and vertical maxillary deficiency, the preferred treatment is to move the maxilla into a more anterior and inferior position, which also increases its size as bone is added at the posterior and superior sutures. Successful forward repositioning of the maxilla can be accomplished before age 8. To resist tooth movement as much as possible, the maxillary teeth should be splinted together as a single unit. The maxillary appliance must have hooks for attachment to the facemask that are located in the canine-primary molar area above the occlusal plane. The facemask usually worn until a positive overjet of 2-5mm is achieved interincisally. Occipital chin cup is successful in those patients who can bring their incisors close to an edge-to-edge position when in centric relation. This treatment is particularly useful in patients who begin treatment with a short lower anterior facial height, as this type of treatment can lead to an increase in lower anterior facial height. If the pull of the chin cup is directed below the condyle, the force of the appliance may lead to a downward and backward rotation of the mandible.

• 원예과학기술지
• /
• 제35권2호
• /
• pp.265-275
• /
• 2017

Selection of double-flowered plants at the seedling stage is one of the main purposes of stock breeding programs. Eight stock cultivars of Matthiola incana L. named 'Nobel', 'Cinderella', 'Pacific', 'Avalanche', 'Midblue', 'Lavender', 'Goddess' and 'Esfahan', with different percentage of double-flowered plants were used for examining the relationship with three morphological types of cotyledons. The results of a chi-square test indicated that in heart-shaped (HC) and cup-shaped cotyledon (CC) populations, the number of plants with double flowers was much more than that of single flowers and CC seedlings rarely produced single flowers. Therefore, increasing the number of CC seedlings can improve the percentage of double flowers. The highest and lowest numbers of CC seedling were observed in high double and single flower cultivars, respectively. Single flower cultivars showed the maximum count of dumbbell-shaped cotyledons. Chromosome pairing of these cultivars was evaluated using the squash technique. Aneuploid cells were found in 'Nobel' and 'Goddess' cultivars, which showed the highest percentage of CC seedling. Based on morphological measurements, the highest value of inflorescence size was observed in the seedlings with cup-shaped cotyledons.

• 복식문화연구
• /
• 제25권4호
• /
• pp.419-432
• /
• 2017

The purpose of this study was to investigate preferences and satisfaction levels in maternity and nursing brassiere. A questionnaire was conducted on 302 women from their 20s to 40s who had breastfeeding experience. The questionnaire included questions on participant demographics, purchase behavior, and design preference and satisfaction levels. The majority(98.0%) of the participants had had experience using maternity/nursing brassieres. More than 90% of the participants agreed with the need for maternity/nursing brassieres distinct from regular ones. Shopping online was the most common means of purchasing them. The most and second-most owned fastener types were the detachable shoulder belt type and inside-cup type, respectively. The most selected reason for purchasing or wearing a maternity/nursing brassiere was the convenience of donning and doffing the brassiere during breastfeeding. Participants had lower satisfaction levels with how well maternity/nursing brassieres support and center the breasts, and with the variety of designs available on the market. Respondents indicated that fasteners for breastfeeding should be developed to provide comfort and convenience for breastfeeding. Wearing comfort was reported as the most important factor in purchasing selection, both during the pregnancy and breastfeeding periods. No-wire, back closure, full-cup, U-shape wing, and skin color were the most preferred design styles.

• Tuberculosis and Respiratory Diseases
• /
• 제78권1호
• /
• pp.23-26
• /
• 2015

Metastatic squamous cell carcinoma from a cancer of unknown primary (CUP) affecting the intrathoracic lymph node is very rare. We reported a case of metastatic squamous cell carcinoma in the hilar and interlobar lymph node from a patient with CUP and reviewed the associated literature. Abnormal mass in the right hilar area was incidentally detected. A chest computed tomography scan showed a 2.5-cm diameter mass in the right hilum that had changed little in size for 3 years. The patient underwent a right pneumonectomy and mediastinal lymph node dissection. A metastatic squamous cell carcinoma in the hilar and interlobar lymph nodes without a primary lung or other lesion was diagnosed. The patient received adjuvant chemotherapy for a diagnosis of T0N1M0 lung cancer.

• 한국의류학회지
• /
• 제34권4호
• /
• pp.673-685
• /
• 2010

This study evaluates the fitness of brassieres through size measurement, comparative pattern analysis, cross section map analysis, 3-D shape analysis number, and fitness evaluation with a focus on domestic and overseas brands. Experimental brassieres were selected as mold brassieres of 3/4 cup in 75A size that is considered a popular design. Brands of selected brassiere were 2 domestic brands (A, B), 1 licensed brand (C), and 2 overseas brands (D, E). Subjects were 8 women in their early 20's. Data were analyzed by descriptive statistics, analysis of variance, reliability analysis, and factor analysis. The results were as follows; the size and pattern of brassieres showed a difference by each brand even though brassieres are the same design. In the wearing effect of brassieres, overseas brand brassieres played a major role in the breast-up effect, but they were not appropriate for the somatotype of Korean women. Domestic brand brassieres showed the volume-up effect, that was confirmed by the increasing bust circumference, bust depth when subjects wore it. In addition, the licensed brand brassieres showed the correction effect of body shape. Therefore, when purchasing a brassiere, the most important condition is to consider the individual characteristics of the somatotype. The results of factor analysis through a functional evaluation show that wearing satisfaction, size satisfaction, and the position of the bust point were important factors for fitness satisfaction and purchase.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.107-123
• /
• 2008

The purpose of this research is to compare and analyze the brassiere patterns sold in Shanghai and Korea and to present basic materials needed in developing the brassiere patterns in Chinese adult women market. The study subject which is to find the difference in brassiere patterns of Korea and China has been selected of 3 Korean brands and 4 Chinese brands. 1. For the brassiere patterns sold in Korea, it were using the same size for the width of Hook&Eye, space between the shoulder lace on the back, slope of wing and the location of the Keeper was similar. 2. For the cup supporting base, Chinese brassiere covers the lower part of the breast and as it is not comfortable and has a phenomenon of loosening up, there were severe puckering. For issues in the wearing experiment, amendments in patterns with the cup part was required. 3. Chinese brassieres were big differences in wing angles and for Aimer, it had the steepest trend in wings and thus the wings headed down and for Gujin, as the angle of the wing was smaller than $90^{\circ}$, it was heading upward. 4. Upon comparing the patterns of the Korean and Chinese brassiere, although most of the sizes excluding the wing angle had similar sizes, there was big differences in the wing angle. The reason why the brassiere patterns sold in China had bigger wing angle was due to the fact that more Chinese women had sway back body type than the Korean women and should reflect such difference in body size into making the brassiere patterns for each women.

• 한국추진공학회지
• /
• 제6권2호
• /
• pp.29-36
• /
• 2002

두 번째 벤츄리 끝단 각도가 가스터빈 연소기의 유동 및 분무 특성에 미치는 영향을 이해하기 위해 스월 vane 형태의 2중 스월컵을 장착한 산업용 가스터빈 엔진에 대해 두 번째 벤츄리 끝단 각이 수렴형, 직선형, 발산형의 세 경우에 대해 실험을 수행하였다. 두 번째 벤츄리 끝단 각도의 변화가 가스터빈 연소기의 재순환 영역의 위치, 크기 및 형상 등의 유동 특성과 연료 액적 분무 형태를 크게 변화시킴을 확인 할 수 있었다. 발산형 벤츄리에서는 내부 재순환 영역이 점화가 일어나는 지점에서 가까운 곳에서 형성되므로 화염의 안정화에는 탁월할 것으로 판단되지만, 수렴형 벤츄리에서 가장 작고 균일한 크기의 액적들이 측정되었고, 내부 재순환 영역이 연소기 내에 길게 형성된 점으로 고효율, 저공해 연소기로는 수렴형 벤츄리의 경우가 적합하리라 판단된다.

• 환경위생공학
• /
• 제17권2호
• /
• pp.11-17
• /
• 2002

Diesel particulate matter (DPM) is known to be one of the major harmful emissions produced by diesel engines. The majority of diesel particles are in the range of smaller than $I{\mu}\textrm{m}$. Because of their tiny volume, ultrafine diesel particles contribute very little to the total mass concentration which is currently regulated for automobile emissions. Diesel particles are known to have deleterious effects upon human health because they penetrate human respiratory tract and have negative effects on the health. The measurement of the number distribution of nanometer size particles (nanoparticles) in the diesel exhaust emission is important in order to evaluate their environmental and health impact, and to develop new types of diesel particulate filters. In this study, we directly sampled particulate matters emitted from a diesel truck mounted on the chassis dynamometer by a flow separator and dilution system, and measured the nanoparticles using two types of differential mobility analyzers combined with a Faraday cup electrometer (FCE) and a condensation particle counter (CPC). The particle size distributions were analyzed by changing engine operation condition, i.e. ratio of engine loading. The total number concentration of particles were increased with the engine loading ratio and the nanoparticles (less than 50nm) were affected by hydrocarbon (HC) concentration in the diesel exhaust.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 추계학술대회논문집
• /
• pp.249-267
• /
• 1995

The purpose of this study is to analyze breast shape by age, to classify breast types and then to suggest brassiere size chart. The subject of anthropometric measurement were 232 women in 20's and 40's. The direct anthropmetric measurement were analyzed by mean, standard deviation, duncan test, T-test, ANOVA, factor & cluster analysis The results are as follows; 1) as a result of analysis for the measurements, according to the increase of age, the items of height were decreased and the items of width, depth, cir- cumference, length were increased, being obesity and breast points were dropped. So the volume and bottom area of 40's women's breast were lager than 20's women's. The width of breast points was bide by increasing of intereior. 2) as a result of factor analyxis, 5 factors were extracted as important factor of breast shapes(obesity of breast and location of breast point, breast height and volume, upper dimensions of breast/lower dimensions of breast, interior dimensions of breast/exterior dimensions of breast, volume of the lower part and drop of breast) 3) as a reslut of cluster analysis, the breast shape were classified into 4 types. namely, typel has the smallest volume, bottom area of breast and the slenderest breast, type2 was the second obesity type. type3 was middle sized type. type4 has much dropped, wide bottom area of breast and the biggest form. 4) To establish brassiere sizing system, the loss funtion was used to decide interval of under bust girth and cup size of size chart. 20 brassiere sizes were established and the size chart covers 92.2% of all subject.

• 대한가정학회지
• /
• 제41권8호
• /
• pp.201-212
• /
• 2003

This study aims to improve the comfort and fit of womens swimsuits. Based on the results of the survey, trial suits were designed. In terms of the breast cap, there are five variations based on the feature, size, and thickness and two variations according to the connection mode of the cap. Total 17 trial swimsuits were made, ease of movement and wearing comfort were evaluated. The results of this study were as follows: 1. In terms of movement according to the type of breast cap, the round type shelved much less movement than the triangular type at the lower part of the cap. According to size, the cap that was manufactured on the basis of brassiere cup size showed much less movement than the ordinary cap size in the same round type of cap. In terms of the connection mode between breast caps and swimsuits, there was less cap movement when they were connected by power nets compared to the ordinary models which were connected by conventional rope. 2. Analysis of the differences in wearing comfort. The round type proved to be more convenient than the triangular type at the lower circumference of the caps, the power net collection was rated more positively by the respondents.