• 보존과학연구
• /
• s.36
• /
• pp.49-63
• /
• 2015

In this study, the annual and seasonal concentrations of aldehydes was measured using the active type and passive type method in the temporary exhibition hall and outdoor air. It was compared with the correlation between the methods according the comparison of methods to measured concentrations. As a results, the ${\Sigma}$ aldehydes in exhibition hall by the active type was higher than 6.4 times by passive type. The formaldehyde was exceeded standards in exhibition facilities of the Ministry of Environment. It was the highest concentrations in summer. Annual I/O ratio of formaldehyde was 5.4 and acetaldehyde was 1.9, it was confirmed that a large amount occurs in the temporary exhibition hall. The results of the correlation coefficient and the t-test of formaldehyde were a strong positive linear relationship between the active type and the passive type.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.266-274
• /
• 2019

As can be seen in the statistics on domestic performance facilities, small or large scale of acoustic renovations seem to be unavoidable in many of those facilities due to its senility. However it is hard to find case studies which can be referred to for its acoustic renovation process. This study tried to provide a case study example of acoustic renovation for a high school auditorium which has many restrictions as a cultural heritage building. Requirements from the client and acoustic problems found through a field measurement of existing space motivated acoustic design solutions and alternatives which can improve the acoustics of the space. The whole process from the initial stage of diagnosing acoustic problems to the final stage of a post acoustic evaluation after the completion of construction was described. The result from the post acoustic evaluation suggested that reverberation characteristics of the space as well as definition and clarity have been greatly improved by applying acoustic design solutions and alternatives. However, loudness of sounds in the space didn't reach the aimed level, which is due to the limited capability of slat ceiling structure for providing strong early reflections.

• Journal of Conservation Science
• /
• v.38 no.4
• /
• pp.265-276
• /
• 2022

A long-term monitoring investigation at Sarushima Battery (Kanagawa, Japan), which is one of the modernization heritages was conducted from 2017.06 to 2020.12. The investigation of the temperature and relative humidity (RH), measurement of the amount of brick decay, and X-ray diffraction analysis of the brick decay was conducted to understand in detail the environment in which the historical brick structure, the state of deterioration, identify the factors of deterioration. Furthermore, it was discussed whether the suitability of these investigation methods for assessing the status, identifying the level of deterioration and the factors that led to deterioration at the historical brick heritages. It was found that the brick deterioration at the site progressed especially in two periods: in April, and from June to August. These periods coincided with the period when the RH inside the structure decreased, and the Toyo-gumi bricks were in the process of absorbing moisture. Several different types of salts were detected in brick decay, especially thenardite, which is considered highly hazardous and destructive during periods when the amount of brick decay increased. Therefore, the RH in the structure and the salts present in the bricks were identified as one of the factors in the deterioration of the bricks at the site. The methods used in this study are appropriate as the initial survey methods for investigating the current conditions and identifying the causes of deterioration because it is possible to understand the environment within the modernization heritages, grasp the details of deterioration progression, and identify the characteristics of deterioration progression and its factors through long-term investigation using the simple methods.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.54-70
• /
• 2023

Surveys and studies on cultural assets using LiDAR measurement are already active overseas. Recently, awareness of the advantages and availability of LiDAR measurement has increased in Korea, and cases of using it for surveys of cultural assets are gradually increasing. However, it is usually restricted to surveys of mountain fortresses and is not actively used for surveys of ancient tombs yet. Therefore, this study intends to emphasize the need to secure fundamental data from LiDAR measurement for the era from the Three Kingdoms to Unified Silla in which recovery, maintenance, etc., in addition to the actual surveys, are unfulfilled due to the sites being mainly distributed in mountainous areas. For this, LiDAR measurement was executed for the area of Jangsan Ancient Tombs and Chunghyo-dong Ancient Tombs in Seoak-dong, Gyeongju, to review the distribution and geographical conditions of ancient tombs. As a result, in the Jangsan Ancient Tombs, in which a precision archaeological (measurement) survey was already executed, detailed geographic information and distribution conditions could be additionally identified, which could not be known only with the layout indicated by the topographic map of the existing report. Also, in the Chunghyo-dong Ancient Tombs, in which an additional survey was not conducted after 10 tombs were found during the Japanese colonial period, the location of the ancient tombs initially excavated was accurately identified, and the status and additional information was acquired, such as on the conditions of ancient tombs not surveyed. Such information may also be used as fundamental data for the preservation and maintenance of future ancient tombs in addition to the survey and study of the ancient tombs themselves. LiDAR measurement is most effective for identifying the condition of ancient tombs in mountainous areas where observation is difficult or access is limited due to the forest zone. It may be executed before on-site surveys, such as archaeological surveys, to secure data with high availability as prior surveys or pre-surveys. Therefore, it is necessary to secure fundamental data from LiDAR measurement in future surveys of ancient tombs and to establish a survey and maintenance/utilization plan based on this. To establish survey/study and preservation/maintenance measures for ancient tombs located in mountainous areas, a precision archaeological survey is currently executed to draw up a distribution chart of ancient tombs. If LiDAR measurement data is secured before this and used, a more effective and accurate distribution chart can be drawn up, and the actual conditions can be identified. Also, most omissions or errors in information can be prevented in on-site surveys of large regions. Therefore, it is necessary to accumulate fundamental data by actively using LiDAR measurement in future surveys of ancient tombs.

• Analytical Science and Technology
• /
• v.32 no.6
• /
• pp.225-232
• /
• 2019

Traceability establishment in chemical measurements is a like a linkage established through an unbroken chain from the measured results to the international system (SI) of units. The primary process for traceability establishment is the purity assignment of a target material to be measured. In this study, we studied the purity assignment of 17α-hydroxyprogesterone (17-OHP). The presence of 17-OHP is indicative of congenital adrenal hyperplasia (CAH) and it builds up due to the deficiency of 21-hydroxylase and 11β-hydroxylase enzyme in the human blood. The purity assignment of 17-OHP was performed by the mass balance method, in which the impurities are categorized into four classes: total related structural impurities, water, residual organic solvents, and nonvolatiles/inorganics. The total related structural impurities were characterized by HPLC-UV; water content was determined by Karl-Fisher coulometer; and the total residual solvents and nonvolatiles/inorganics were determined by TGA. The purity of 17-OHP from a commercial manufacturer was calculated as 993.30 mg/g, and the expanded uncertainty was 0.58 mg/g. The proposed method was validated by uncertainty evaluation and comparing with the actual value of purity.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.459-471
• /
• 2013

The purpose of this study is to find factors to measure satisfaction degree of old palace tourism. Frochot & Hughes developed HISTOQUAL, the satisfaction measurement method of cultural heritage tourism in 2000. This study intended to add the expertise factor to developed HISTOQUAL. It surveyed 504 tourists who visited Kyeongbokgung Palace in Seoul. The result of analysis on tourism service factors to satisfaction showed significant effect. And the influence of satisfaction to revisit and recommendation also show significant effect.

• Smart Structures and Systems
• /
• v.15 no.5
• /
• pp.1363-1372
• /
• 2015

Smart structures and intelligent systems play pivotal roles in numerous areas of applied sciences ranging from civil engineering to computer and communications systems engineering. Although such structures and systems have been intensively deployed in these areas, they have been, interestingly, very rarely deployed in the field of cultural heritage preservation.This paper presents one of thefirst such attempts. A new methodology is describedthat deploys smart structures andlinks them with artificial intelligence methods.These solutions are referred toas advanced hybrid engineering artefacts. By their use,important environmental factors can be monitoredin hard to access, remote or unsafe locationsby minimizing the need for human involvement. In addition toproviding safety the methodologyalso reduces costs and, most importantly,providesa new way to modelany particular micro-environment in a much more efficient way than this is possible with traditional ways. Last but not least, although themethodology has been developed for cultural heritage preservation, its application areas are much broader and it is expected that it will find its applicationin other domains like civil engineering and ecology.

• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.153-158
• /
• 2019

The traditional sizing treatment for the Hanji is performed to give the following functions. Those are to stabilize the paint of the painting, to prevent the paint of painting and moisture from smearing into the painting itself, to prevent the paint of the painting and moisture from passing to the lining paper, and to make the colors of painting match the surrounding.This study analyzed a result of the effect of Hanji sizing characteristic according to glue and alum mixing ratio and applying times, affects to pigments of painting and fastness of Hanji using accelerated aging test. As a result of color measurement of sizing treated Hanji, the concentration of glue and the number of application increased, the brightness and the $L^*$ value decreased but the yellowness index increased.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.2
• /
• pp.76-95
• /
• 2011

After dismantled, Mireuksajiseoktap(Stone pagoda of Mireuksa Templesite) is being in the stage of restoration design. Now, different ways - producing restoration model, a 3 dimension simulation - have been requested to make more detailed and clearer restoration design prior to confirmation of its restoration design and actual restoration carry-out. This thesis proposes the way to build the detailed model for better restoration plan using extensively-used Reverse Engineering technique and Rapid Prototyping. It also introduces each stage such as a 3-dimension actual measurement, building database, a 3-dimension simulation etc., to build a desirable model. On the top of that, this thesis reveals that after dismantled, MIruksaji stone pagoda's interior and exterior were not constructed into pieces but wholeness, so that its looks can be grasped in more virtually and clearly. Secondly, this thesis makes a 3-dimension study on the 2-dimension design possible by acquiring basic materials about a 3-dimension design. Thirdly, the individual feature of each member like the change of member location can be comprehended, considering comparing analysis and joint condition of member. Lastly, in the structural perspective this thesis can be used as reference materials for structure reinforcement design by grasping destructed aspects of stone pagoda and weak points of the structure. In dismantlement-repair and restoration work of cultural properties that require delicate attention and exactness, there may be evitable errors on time and space in building reinforcement and restoration design based on a 2-dimension plan. Especially, the more complicate and bigger the subject is, the more difficult an analysis about the status quo and its delicate design are. A series of pre-review, based on the 3-dimension data according to actual measurement, can be one of the effective way to minimize the possibility that errors about time - space happen by building more delicate plan and resolving difficulties.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.24-41
• /
• 2007

In this paper several recent case studies of near surface geophysical applications in Greece are presented. The case studies are focused mostly in archeological site investigation, a field which is of high interest in Greece due to its reach historical heritage. The growing construction works in several parts of Greece as well as the increasing public interest in exploring and preserving cultural heritage lead to an increase of the application of nearsurface geophysics techniques as a preliminary investigation tool prior to engineering and archeological excavation works. Research efforts, presented in this work, are focused to extending and adapting standard nearsurface techniques in order to be made more effective for archaeological site investigation. The presented case studies involve not only standard field investigation procedures but also novel approaches such as the use of non-spike electrodes, efficient measuring and instrumentation strategies, unusual configurations and measurement environments. Overall it shown that efficient and state-of-art nearsurface geophysical techniques used for archaeological prospection purposes provide significant archaeological and structural information valuable for archeologists, engineers and conservation scientists.