• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.195-195
• /
• 2018

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.2
• /
• pp.190-194
• /
• 1985

Three different improved pre-release rice varieties, when transplanted at different ages of seedlings, showed that 40 day old seedlings produced the longest panicle, whereas 30 day old seedlings produced the highest culm length among treatments in all treated varieties. 40 day or older seedlings reduced the culm length remarkably mainly due to decrease in lower internodes in IET7251 and BG400-1, and due to upper as well as lower internodes in B44b-50-2-2-5-1. 30 day old seedlings produced maximum number of visible internodes. Heading as weil as maturity was delayed with increasing age of seedling.

• Plant Resources
• /
• v.5 no.2
• /
• pp.104-108
• /
• 2002

In order to obtain basic information for selecting early maturing rice varieties which is suitable for early cropping before Alisma plantago in the southern part of Korea. Six rice varieties were grown from May to August in 2002 at Youngjeon Experiment Field, Sunchon and yield components and yield of plants were investingated. Early maturing rice cv. Grubyeo showed higher rough rice yield than any other varieties used in the experiment. It showed high yield components, such as culm length, panicle length, number of panicles per plant, number of spikelets per panicle and ratio of ripened grains. Therefore, it was concluded that Grubyeo was the most suitable variety with high yield for the cultivation before growing of Alisma plantago at the southern part of Korea. The heritability of culm length number of spikelets per panicle and rough rice yield were high and that of panicle length number of panicle per plant, ratio of ripened grain and 1,000 grain wt. of milled rice were low. According to the result of path coefficient analysis, characters highly correlated with rough rice yield showed large direct effects on rough rice yield.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.310-310
• /
• 2017

'Gawaji 1', an early maturing and low amylose content rice variety adaptable to double cropping system with barley as later winter crop., was developed by the crop breeding team of Crop Research Division, GARES, Hwaseong, Korea in 2016. 'Gawaji 1' was derived from a cross between 'Baegjinju' and 'Sangmibyeo' in 2004. This variety had heading date of August 4 in Gyeonggi Province. It had a semi-elect plant type and resistance to lodging with strong culm. Its culm length was 67 cm. This variety had 15 tillers per hill and 104 spikelets per panicle. It was medium grain variety showing 1,000 grain weight of brown rice of 19.3g. Its protein contents of milled rice was 8.2% which was lower than 'Baegjinju'. Its milling ratio was 75.5% which was higher than 'Baegjinju'. The yield of milled rice was 5.0 MT/ha under the ordinary culture of the local adaptability test in 3 areas of Gyeonggi Province for three years. 'Gawaji1' is highly adaptable to Gyeonggi Province, especially to northern region of Han River.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2020.06a
• /
• pp.120-120
• /
• 2020

Based on the simple sequence repeat (SSR) marker, a Korean wheat core collection were established with 616 wheat accessions. Among them, the SNP genotyping for the entire genome was performed using DNA chip array to clarify the whole genome SNP profiles. Consequently, a total of 35,143 SNPs were found and we re-established a mini-core collection with 247 accessions. Population diversity and phylogenetic analysis revealed genetic diversity and relationships from the mini core set. In addition, genome-wide association study (GWAS) was performed on 19 phenotypic traits; ear type, awn length, culm length, ear length, awn color, seed coat color, culm color, ear color, loading, leaf length, leaf width, seeding stand, cold damage, weight, auricle, plant type, heading stage, maturation period, upright habit, and degree of flag leaf. The GWAS was performed using the fixed and random model circulating probability unification (FarmCPU), which identified 14 to 258 SNP loci related to 19 phenotypic traits. Our study indicates that this Korean wheat mini-core collection is a set of germplasm useful for basic and applied research with the aim of understanding and exploiting the genetic diversity of Korean wheat varieties.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.1
• /
• pp.59-65
• /
• 2014

As for Ethephon treatment, the heading stage is 2 days later at the concentration of 250 ppm and 500 ppm for the booting stage that when there is no treatment, 4 days later at the concentration of 1000 or more ppm but no difference for the blossoming and ripening stage. The culm length get shorter as the concentration of Ethephon is higher and the rate of culm length damaged is 37% for 1500 ppm of booting stage, which is the most effective processing, and the inferior culm length damage rate is bigger than the superior culm length damage rate. There is no difference between the number of glumous flower, culm and litter weight and the non-processing and as for the thousand grain weight, it is slightly bigger than when there is not any processing. The rate of germination is indifferent, the number of seeds get numerous regardless of the concentration of treatment and the number augments by 5% maximum for the booting stage. The number of days it takes from treatment of desiccant to the moisture content for harvesting time is respectively 15 days for seeds of 30 day-treatment, 10 days for seeds of 35 days-treatment and 5 days for seeds of 40 to 45 day-treatment. As for the harvest time after treatment of desiccant, the treatment at $30^{th}$ days and $35^{th}$ after the earing is 8 days earlier than the culture by conventional methods, 8 days earlier for the treatment at $40^{th}$ day. When the desiccant treatment is implemented, the thousand grain weight is heavier as the number of days of treatment gets later. The rate of germination gets higher as the number of days of treatment after earing gets later but there is no statistically significant difference 35 days after the earing. Yields are 37% compared to the culture by conventional methods for the treatment of 30 days after the earing, 70% compared to the culture by conventional methods for the treatment of 35 days after the earing, and 92% compared to the culture by conventional methods for the treatment of 40 days after the earing. The treatment before the physiological maturity impacts greatly upon the quality of seeds.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.3
• /
• pp.219-225
• /
• 2004

This study was conducted to evaluate growth and yield characteristics and the contribution to the yield according to the emergent sequence of tiller under two planting density $(60{\times}15\;cm,\;60{\times}25\;cm)$ in Coix lachryma-jobi L. var. mayuen Stapf. The average culm length and number of rachillas of $60{\times}25\;cm$ planting density were 20 cm shorter and 4.7 higher, respectively, whereas seed setting position of $60{\times}25\;cm$ planting density was 1.7 nodes lower compared with $60{\times}15\;cm$ planting density. Culm length and culm diameter of each tiller became shorter and thinner as the tiller emerged later. Length of rachillas was longer, number of grains was higher and ripening rate was also higher in $60{\times}25\;cm$ planting density than those of $60{\times}15\;cm$ planting density, whereas 100 grain weight in $60{\times}25\;cm$ planting density was lower by 0.5 g compared with $60{\times}15\;cm$ planting density. Length of rachillas and number of grains according to the emergent sequence of tiller were shown shorter and lower as the tiller emerged later. The highest number of bract was obtained from the main culm in both planting densities. 100 grain weight according to the emergent sequence of tiller became lower as the tiller emerged later in $60{\times}15\;cm$ planting density, but there was no clear tendency in $60{\times}25\;cm$ planting density. Among 8 tillers, 5th tiller and 4th tiller of main culm contributed 84.4% to the yield in $60{\times}15\;cm$ planting density, while it was 84.1% in $60{\times}25\;cm$ planting density. Analysis of path coefficient to grain yield showed that direct effect was the highest in the number of grain per tiller followed by in the 100 grain weight and in ripening rate.

• Journal of Korean Society of Forest Science
• /
• v.10 no.1
• /
• pp.7-16
• /
• 1970

There are 19 species of bamboo in Korea, among which few are of commercial value. The Phyllostachys has wide range of utilization, for sea weed production, industrial production of various bamboo wares, etc. The total export from Chenla-Namdo to some more than ten countries was recorded 204,000,000 won worth in 1969. As civilization develops so does the techniques of bamboo works, and they in turn accelerate the demand for bamboo wood of better quality. In the light of this trend, the author attempted to make bamboo plants to develope a quadragular culm with elaborate design as disired instead of the original round one, with the expectation that it might be widely welcomed by hand workers, interior decorators. Here are some facts found out in this experiment: 1). The greater the diameter of the shoot at the eye level was, the better result was brought, and as shown in Fig. 5 the rate of success was 72% with the shoots of 7.5 cm thick. 2). The shoots of 30 cm in length showed 100% of success, developing into a desired quadrangular culms without fail(See Fig. 6). 3). The intensity of wood fiber increased as time lapsed, without receiving any influence by the weather (See Fig. 7, 8). 4). During the growing, the culm proved to be flexible enough to bend up to 90 degree (See Fig. 9). 5). In an attempt to promote the value of bamboo by decoration, the author tried to impress rectangular indents on the culm. The indention using a qudangular board 1cm smaller in width than the shoot diameter gave 100% success (See Fig. 10). 6). Design experiment was also successful both in coloration and impressing and the resulting designs delicately depended on the kinds of chemicals used and their combination (Table 2) (See Fig. 12, 13, 14). With the above mentioned findings, the author concludes that the mass production of quadrangular bamboo culm is quite a promissing as an new industry to develope bamboo works to a more valuable one. This research was carried out with the research fund provided by the Ministry of Education in 1969.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.3
• /
• pp.163-175
• /
• 1974

Effects on yields, yield components and nutrient content of potassium depression for two or three weeks at various growth stages were investigated in rice (var. Jinheung) under sand culture system.(K 40 ppm 1973) 1. Analysis of variance showed significant difference among treatments of both two-week (at p=0.01) and three-week depression (at p=0.05) in yield. 2. Most sensitive stage to potassium depression on yield appeared two weeks until heading (42% yield decrease) and sensitivity decreased the growth stage is apart from heading either before or after. During 30 days after transplanting two-week potassium depression increased yield, but three-week depression decreased yield. Until about 30 days after heading depression caused poor yield. 3. Root potassium involves in harvest index, filled grain ratio and grain weight with significant correlation and considerably in spikelet per panicle while potassium in leaf sheath+culm involves considerably in spikelet per panicle and panicle per hill. Relative total dry matter weight was significantly correlated with panicle per hill, spikelet per panicle and K or K/Ca+Mg only in leaf sheath+culm. The indications are that root potassium contributes for building sink and efficiency of structure while potassium in leaf sheat+culm primarily for building source, productive structure. 4. Relative yield was significantly correlated with potassium content in root and leaf sheath+culm and with K/Ca+Mg and its ratio before and after depression in root indicating that potassium depression occurs greatly in root and that K/Ca+Mg might have more important role than K content alone under depression. 5. Optimum level of $K_2O$ appears around 3% in leaf blade. 4% in leaf sheath+culm and 1% in root under the assumption that below these level the same content has the same role in relation to yield during growth. The K/Ca+Mg appeares to be 2.5 in root and should not decrease throughout the growth stages. 6. The increase of sodium content in plant by K depression was highest, especially in leaf sheath during the most insensitive period to K depression suggesting that insensitivity may be attributed to partial replacement of Na for K. Partial replacement seems very little in sensitive stage (later stage) and sensitive organ (root).

• Journal of Korean Society of Forest Science
• /
• v.76 no.4
• /
• pp.338-347
• /
• 1987

The research was carried out to investigate the related phenomena, the latent structures and synthetical characteristics in various growth factors of Phyllostachys bambusoides Sieb. et Zucc. growing at Damyang gun, Chollanamdo, using multivariate analysis. 1. By synthetical characteristics in canonical correlation between height-growth factor group and diameter-growth factor group, the former was determined by the culm height ($x_1$), and the latter by the. diameter of the largest internode($x_7$). And for those between quantitative growth factor group and qualitative growth factor group, the former was determined by the surface area($x_{10}$), and the latter by the diameter of the largest internode ($x_7$). 2. The ten growth factors of bamboo culm were simplified by two principal components on the basis of accumulated proportion aimed at 90%. The first principal component($Z_1$) as a "size factor" showed high correlation with growth factors except eye-height diameter($x_5$). The second principal component($Z_2$) as a "shape factor" showed high correlation only with $x_5$. 3. The bamboo culm, and the latent phenomenon between their growth factors could be determined by two common factors showing high communality(94.16%). The ten growth factors can be grouped into two attribute factors: quantity and quality. 4. The bamboo culms can be classified into five types: total, volume, shape-quality, inferior and middle.