• Journal of Nutrition and Health
• /
• 제30권9호
• /
• pp.1045-1049
• /
• 1997

In order to study the content of selected elements in the organs of the mice, mice were fed with green juice of Angelica keiskei Koidz for 16 weeks. The results obtained from the experiments are summarized as follows : 1) The element contents(cr, Mn, Ni, Cu, Zn, Cd, Ba, Pb, and Fe) in the whole plant are generally the same as those the previous reports. 2) The element contents(Cr , Mn, Ni, Cu, Zn, Cd, Ba, Pb and Fe) in the green juice did not exceed those of the edible water standard. 3) The element contents (Cr, Mn, Ni, Cu, Zn, Cd, Ba, Pb and Fe) in the brain is slightly higher than those in the whole plants. 4) The element contents(Cr, Ni, Pb and Fe) in the organs of the mice fed green juice for 16 weeks are the same as those of the previous reports.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제16권5호
• /
• pp.113-118
• /
• 2008

We have developed an integrated giant magneto resistance using not only circuit but also integrating technique with semiconductor for automobile application. It has four elements used for giant magneto resistance sensor. Ni-Fe/Cu multi layers were prepared on a glass substrate by magnetron sputtering. The dependence of magneto resistance on the thickness of the Ni-Fe and Cu layers was investigated. The MR ratio showed a saturated a peak at Cu layer $10{\AA}$, Ni-Fe layer $50{\AA}$, where the MR ratio is about 8.7% at room temperature. By means of Ni-Fe multi film and specific integrating technique, these new giant magneto resistance sensor showed excellent resistance characteristics.

• Journal of Magnetics
• /
• 제6권4호
• /
• pp.129-131
• /
• 2001

In order to investigate the effect of the interface on GMR, [NiFe(25 ${\AA}$)/Cu(24${\AA}$)]$_2$/Si thin film was epitaxially grown on HF-treated Si (001) substrate using a DC magnetron sputtering method. Typical GMR effects could be observed in epitaxial film with a weak antiferromagnetic exchange coupling while non epitaxial film showed unsaturated and broad MR curves probably due to inter-diffusion between NiFe and Cu layers. Ferromagnetic resonance (FMR) experiment showed two distinct absorption peaks in all films. Each peak was revealed to come from each NiFe layer with different magnetic property. In FMR measurement very clear interface in epitaxial films could be confirmed by a lower value of line width (ΔH) and higher M$\sub$s/ of epitaxial film than those of non epitaxial films, respectively.

• Journal of the Korean Ceramic Society
• /
• 제28권11호
• /
• pp.873-877
• /
• 1991

The phase stability and the electrical properties of $La(Ni_{1-x}Cu_x)O_3$ (X=0.2, 0.4, 0.6, 0.8) have been investigated. The single phases were observed in the compositions of X=0.2, 0.4, and these single phases were stable up to $870^{\circ}C$ and $950^{\circ}C$ respectively. The electrical properties of these single phase samples showed metallic behavior similar to LaNiO3 from room temperature to the temperature at which the phase was stable.

• Applied Chemistry for Engineering
• /
• 제31권6호
• /
• pp.612-623
• /
• 2020

This study was initiated to quantitatively evaluate the inhibitory effects of five heavy metals (Cd, Cu, Zn, Pb, Ni) on bacterial growth and phosphorus removal in the binary culture of Alcaligenes sp. plus Pseudomonas sp. IC50 values of Alcaligenes sp. plus Pseudomonas sp. for Cd, Cu, Zn, Pb, and Ni were 0.75, 10.93, 7.08, 13.30, and 15.78 mg/L, respectively. For the binary treatments of heavy metals, IC50 was the lowest in the treatment of Cd + Cu, whereas, it was the highest in the Ni + Pb treatment. The EC50 values for Cd, Cu, Zn, Pb, and Ni were 0.54, 11.08, 6.14, 9.33, and 13.81 mg/L, respectively. For the binary treatments of heavy metals, EC50 was the lowest in the Cd + Zn, whereas, the highest in the Zn + Ni. Based on both IC50 and EC50 values for the binary culture of bacteria with the binary mixtures of heavy metals, the most interactive effect was found to be antagonistic, though the only synergistic effect was found in Cu + Ni treatment. Therefore, our results can provide basic data on the toxic effects of heavy metals on the bacterial growth and phosphorus removal in the wastewater treatment process.

• Journal of the Korean institute of surface engineering
• /
• 제42권5호
• /
• pp.232-239
• /
• 2009

This study presented the effect of membrane thickness on hydrogen permeability. Microvoids on the surface of the membrane should not exist for the exact values of hydrogen permeability. Pd-Cu-Ni hydrogen alloy membranes were fabricated by Ni powder sintering, substrate plasma pretreatment, sputtering and Cu reflow process. And this leaded to void-free surface and dense film of Pd-Cu-Ni hydrogen alloy membrane. Hydrogen permeation test showed that hydrogen permeability increased from 2.7 to $15.2ml/cm^2{\cdot}min{\cdot}atm^{0.5}$ as membrane thickness decreased from 12 to $4{\mu}m$. This represented the similar trend as a hydrogen permeability of pure palladium membrane based on solution-diffusion mechanism.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.432-434
• /
• 2009

Metal nano-wire arrays on Cu-coated seed layers were fabricated by aqueous solution method using sulfate bath at room temperature. The seed layers were coated on Anodic aluminum oxide (AAO) bottom substrates by electrochemical deposition technique, length and diameter of metal nano-wires were dominated by controlling the deposition parameters, such as deposition potential and time, electrolyte temperature. Anodic aluminum oxide (AAO) was used as a template to prepare highly ordered Ni, Fe, Co and Cu multilayer magnetic nano-wire arrays. This template was fabricated with two-step anodizing method, using dissimilar solutions for Al anodizing. The pore of anodic aluminum oxide templates were perfectly hexagonal arranged pore domains. The ordered Ni, Fe, Co and Cu systems nano-wire arrays were characterized by Field Emission Scanning Electron Microscopy (FE-SEM) and Vibrating Sample Magnetometer (VSM). The ordered Ni, Fe, Co and Cu systems nano-wires had different preferred orientation. In addition, these nano-wires showed different magnetization properties under the electrodepositing conditions.

• Transactions of Materials Processing
• /
• 제6권2호
• /
• pp.136-144
• /
• 1997

(Ag-10%Ni)/Cu clad metals for electric contact switch were fabricated by cold-roll bonding process. 2 or 3 passes of cold-rolling was carried out for each process to investigate the effect of the rolling passes on the bonding property. The effect of the annealing temperature of copper before the cold-roll bonding on the bond strength was also studied. The specimen bonded with copper annealed below 30$0^{\circ}C$ before roll bonding showed good bond strength. This is because high stored energy in copper promoted the short range diffusion and the grain refinement of copper by the static recrystallization increased the degree of the interfacial coherency. The maximum peel strength of clad metals bonded with Cu annealed below 30$0^{\circ}C$ was 120N.

• Bulletin of the Korean Chemical Society
• /
• 제13권3호
• /
• pp.256-259
• /
• 1992

The 14-membered tetraaza macrocyclic ligand 1,8-diethyl-5,12-dimethyl-1,4,8,11-tetraazacyclote tradeca-4,11-diene(B) can be synthesized as its dihydroperchlorate salt by the one-pot reaction of 2-ethylaminoethylamine, methylvinyl ketone, and perchloric acid in absolute ethanol. The reaction of Ni(II) or Cu(II) ion and the salt yields $[M(B)]^{2+}$ (M = Ni(II) or Cu(II)), which reacts with $NaBH_4$ to produce $[M(D)]^{2+}$ (D = 1,8-diethyl-5,12-dimethyl-1,4,8,11-tetraazacyclote tradecane). The complexes $[M(L)]^{2+}$ (L = B or D) have planar geometry and contain two ethyl groups at the donor nitrogen atoms of the ligands. The red solids $[Cu(B)](X)_2(X)$ = $ClO_4-$ or $PF_6^-$) react with water molecules of atmospheric moisture to produce the purple solids in which water molecules are coordinated to the metal ion. Synthesis, characterization, and the properties of the new N-ethylated macrocyclic ligands and their Ni(II) and Cu(II) complexes are reported.

• Korean Journal of Materials Research
• /
• 제9권12호
• /
• pp.1234-1239
• /
• 1999

Electromagnetic wave asorbing properties of the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$, where X was replaced by substitution elements Cu, Mg, Mn, have been studied. The structure, shape, size and magnetic properties of the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$ were analyzed by XRD, SEM, VSM. The relative complex permittivity, permeability, and electromagnetic wave absorbing properties were measured by Network Analyzer. The structure, shape, size and magnetization value of the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$ were found to be similar in spite of substitution elements. The coercive force and hysteresis-loss showed maximum value when Mg was substituted for X. The dielectric loss(${\varepsilon}_r"/{\varepsilon}_r'$) was found to be maximum value when Mn was substituted for X. Also the magnetic loss(${\mu}_r"/{\mu}_r'$} was found to be maximum with Cu substitution. The electromagnetica wave absorbing property of the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$-Rubber composite with 4mm thickness was excellent as over - 40dB at 9GHz, and the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$-Rubber composite with 8mm thickness was over-40dB at 2GHz. Those composites also showed superior microwave absorbing properties.