• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.447-457
• /
• 2014

The number concentrations, the mass concentrations and the elemental concentrations of $PM_{10}$ have measured at Gosan site in Jeju, Korea, from March 2010 to December 2010. And the correlation and the factor analysis for the number, the mass and the elemental concentrations of $PM_{10}$ are performed to identify their relationships and sources. The average $PM_{10}$ number concentration is observed $246\;particles/cm^3$($35.7{\sim}1,017\;particles/cm^3$) and the average $PM_{10}$ mass concentration is shown $50.1{\mu}g/m^3$($16.7{\sim}441.4{\mu}g/m^3$) during this experimental period. The number concentrations are significantly decreased with increasing particle size, hence the concentrations for the smaller particles less than $2.5{\mu}m$($PM_{2.5}$) are contributed 99.6% to the total $PM_{10}$ number concentrations. The highest concentration of the 20 elements in $PM_{10}$ determined in this study is shown by S with a mean value of $1,497ng/m^3$ and the lowest concentration of them is found by Cd with a mean value of $0.57ng/m^3$. The elements in $PM_{10}$ are evidently classified into two group based on their concentrations: In group 1, including S>Na>Al>Fe>Ca>Mg>K, the elemental mean concentrations are higher than several hundred $ng/m^3$, on the other hand, the concentrations are lower than several ten $ng/m^3$ in group 2, including Zn>Mn>Ni>Ti>Cr>Co>Cu>Mo>Sr>Ba>V>Cd. The size-separated number concentrations are shown positively correlated with the mass concentrations in overall size ranges, although their correlation coefficients, which are monotonously increased or decreased with size range, are not high. The concentrations of the elements in group 1 are shown highly correlated with the mass concentrations, but the concentrations in group 2 are shown hardly correlated with the mass concentrations. The elements originated from natural sources have been predominantly related to the mass concentrations while the elements from anthropogenic sources have mainly affected on the number concentrations of $PM_{10}$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.5
• /
• pp.538-555
• /
• 2012

The purpose of this study was to understand $PM_{2.5}$ chemical characteristics on the Suwon/Yongin area and further to quantitatively estimate $PM_{2.5}$ source contributions. The $PM_{2.5}$ sampling was carried out by a high-volume air sampler at the Kyung Hee University-Global Campus from November, 2010 to October, 2011. The 40 chemical species were then analyzed by using ICP-AES(Ag, Ba, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V and Zn), IC ($Na^+$, $K^+$, $NH_4{^+}$, $Mg^{2+}$, $Ca^{2+}$, $NO_3{^-}$, ${SO_4}^{2-}$ and $Cl^-$), DRI/OGC (OC1, OC2, OC3, OC4, OP, EC1, EC2 and EC3) and GC-FID (acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, benzo[b]fluoranthene, benzo[a] pyrene, indeno[1,2,3-cd] pyrene, benzo[g,h,i]perylene and dibenzo[a,h,]anthracene). When applying PMF model after performing proper data treatment, a total of 10 sources was identified and their contributions were quantitatively estimated. The average contribution to $PM_{2.5}$ emitted from each source was determined as follows; 26.3% from secondary aerosol source, 15.5% from soil and road dust emission, 15.3% from vehicle emission, 15.3% from illegal biomass burning, 12.2% from incineration, 7.2% from oil combustion source, 4.9% from industrial related source, and finally 3.2% from coal combustion source. In this study we used the ratios of PAHs concentration as markers to double check whether the sources were reasonably classified or not. Finally we provided basic information on the major $PM_{2.5}$ sources in order to improve the air quality in the study area.

• Korean Journal of Community Nutrition
• /
• v.12 no.2
• /
• pp.133-141
• /
• 2007

Minerals play important roles in biological processes. Hair mineral analysis has the advantages of conveniences in sampling and observing the profiles of multiple minerals simultaneously. The purpose of this study was to compare hair mineral contents between urban and local middle school students, and to find out the relation with nutrient intakes and clinical symptoms. Ten nutritional minerals and 7 environmental mineral contents were analyzed in the hair samples of 44 and 37 male students who resided in urban and local area, respectively. And their nutrient intake and clinical symptom score were estimated from questionnaire. The average age, height, and weight were 15.1 years, 168.4 cm, 56.8 kg in urban subjects and 15.4 years, 169.1 cm, 61.9 kg in local subjects, respectively. The residence types were apartment (63.6%) and small-sized apartment (22.7%) in urban subjects and apartment (51.4%) and house (37.8%) in local subjects. The primary water sources were purified water (38.3%), running water (18.2%) in urban subjects and purified water (32.4%), underground water (27.0%) in local subjects, respectively. Daily energy and nutrient intakes were not significantly different between two groups. Among the surveyed 17 clinical symptoms, the scores of constipation, cold, anxieties and total score of clinical symptoms in urban subjects were significantly love. than those in local subjects. Hair contents of Na, Mg, Ca, Cu, V Al, As were significantly higher, while U was lower in urban subjects compared to those in rural subjects. Hair contents of Ni and U were significantly correlated with food intake, and Cr, V, Al, Sb, As, U showed a correlation with energy intake. Hair Mg level showed significantly negative correlation with total clinical symptom score. In conclusion, hair mineral profile between urban and local students was significantly different. And some of these minerals were significantly correlated with food and nutrient intakes. Especially hair magnesium was significantly correlated with total clinical symptom score. Therefore, hair mineral levels would be needed for more systematic study elucidating potentiality as a useful clinical tool.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.543-553
• /
• 2010

Almost five million citizens a day are using subways as a means of traffic communication in the Seoul metropolitan. As the subway system is typically a closed environment, indoor air pollution problems frequently occurs and passengers complain of mal-health impact. Especially $PM_{10}$ is well known as one of the major pollutants in subway indoor environments. The purpose of this study was to compare the indoor air quality in terms of $PM_{10}$ and to quantitatively compare its source contributions in a Seoul subway platform before and after installing platform screen doors (PSD). $PM_{10}$ samples were collected on the J station platform of Subway Line 7 in Seoul metropolitan area from Jun. 12, 2008 to Jan. 12, 2009. The samples collected on membrane filters using $PM_{10}$ mini-volume portable samplers were then analyzed for trace metals and soluble ions. A total of 18 chemical species (Ba, Mn, Cr, Cd, Si, Fe, Ni, Al, Cu, Pb, Ti, $Na^+$, $NH_4^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, and ${SO_4}^{2-}$) were analyzed by using an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the source of particulate matters. $PM_{10}$ for the station was characterized by three sources such as ferrous related source, soil and road dust related source, and fine secondary aerosol source. After installing PSD, the average $PM_{10}$ concentration was decreased by 20.5% during the study periods. Especially the contribution of the ferrous related source emitted during train service in a tunnel route was decreased from 59.1% to 43.8% since both platform and tunnel areas were completely blocked by screen doors. However, the contribution of the fine secondary aerosol source emitted from various outside combustion activities was increased from 14.8% to 29.9% presumably due to ill-managed ventilation system and confined platform space.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.674-683
• /
• 2010

The current study was performed to examine the agricultural suitability of the cultivated upland nearby abandoned mining areas in Korea using three different scientific risk assessment models of Korea, USA and UK. For this, three mining sites DM, MG and KS were selected among 687 abandoned mines through preliminary risk assessment. A wide range of parameters were obtained through analysis of both soil and crop samples from the selected areas for heavy metal concentration and questionnaires to the communities along with the selected mining sites. Heavy metal concentration in soil samples was lower than the values previously reported by the Ministry of Environment (ME, 2002). However, both As and Cd concentration in the soil samples exceeded the concern level for agricultural area of the Soil Environment Conservation Act. Judging from the contaminant criteria for the crops, only Zn level in pepper, soybean and corn from the mining area DM exceeded the criteria whereas As, Cd, $Cr^{6+}$, Cu, Hg, Ni, Pb did not exceed the criteria. It was demonstrated that there would be human health risk by Pb accumulated in crops from both mining areas MG and KS when estimated by the risk assessment models of Korea and USA. Against it, results of the risk assessment model of UK showed human health risk by Pb in the crops from all study areas.

• Journal of Environmental Health Sciences
• /
• v.36 no.6
• /
• pp.480-495
• /
• 2010

This study evaluated the distribution of the concentrations of nano-particles and heavy metals (08-Pb, Cr, Zn, As, Fe, 09-Pb, Cr, Zn, Cu, Ni, Mn) in Seoul, Chungnam A and Gwangyang from August to December, in 2008 5 times each in the Seoul area, 5 times in and Chungnam A area and from August to November, in 2009 14 times in the Chungnam A area, 8 times in the Gwangyang area. The examined results showed high concentration level from $PM_1$ through $PM_{0.1}$ in all three areas. These results were obtained the concentration of particles by diameter and statistically significant in Stage5 (1.0-0.56 ${\mu}m$) from the result of conducting Kruskal-Wallis H test (p < 0.05). In the case of the heavy metal concentration included in 0.10-0.056 ${\mu}m$, 0.056 ${\mu}m$, the lead concentration of Chungnam Asan area was 6.49 ng/$m^3$ and 9.93 ng/$m^3$, which was higher than 3.05 ng/$m^3$ and 4.22 ng/$m^3$ of Seoul, respectively. The concentration of iron in Seoul was 9.28 ng/$m^3$ and 13.24 ng/$m^3$, that appeared higher than 2.38 ng/$m^3$ and 3.23 ng/$m^3$ of Chungnam A area, respectively. The concentration level was similar to other metals except lead and iron in Chungnam A area and Seoul. From the concentration of heavy metal included in 0.10-0.056 ${\mu}m$, 0.056 ${\mu}m$, the lead concentration of Chungnam A area was 0.31 ng/$m^3$ and 0.12 ng/$m^3$ while Gwangyang was 0.28 ng/$m^3$, 0.06 ng/$m^3$. Thus Chungnam A area showed higher lead concentration than Gwangyang. The manganese concentration of Chungnam A area was 0.12 ng/$m^3$ and 0.03 ng/$m^3$ while Gwangyang was 0.21 ng/$m^3$ and 0.08 ng/$m^3$. Therefore, the concentration of Gwangyang appeared higher than that of Chunnam A area. These two metals showed statistically significant in 0.056 ${\mu}m$ (p < 0.05, p < 0.01). Among the concentration of heavy metal in all regions, the result demonstrated that the order of higher concentration is arsenic > iron > zinc > chrome > lead > nickel > copper > manganese.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.1
• /
• pp.89-99
• /
• 1991

The metal concentrations in lungs from 12 coal workers' pneumoconiosis(CWP) patients and 6 controls, who were not exposed occupationally to coal mine dust and metals during their life time, were analyzed by atomic absorption spectrophotometry. 1. Copper, lead, nickel, magnesium, manganese, zinc and iron concentrations in lungs of CWP patients were $1.10{\pm}0.088$, $1.12{\pm}0.068$, $0.22{\pm}0.020$, $113.7{\pm}1.31$, $0.19{\pm}0.012$, $10.2{\pm}1.54$, $426.7{\pm}2.63{\mu}g/g$ wet weight. 2. Copper, lead, nickel, magnesium, manganese, zinc and iron concentrations in lungs of controls were $1.10{\pm}0.013$, $0.85{\pm}0.007$, $0.10{\pm}0.008$, $87.6{\pm}1.29$, $0.18{\pm}0.005$, $10.6{\pm}1.44$, $164.9{\pm}3.29{\mu}g/g$ wet weight. 3. The ratios of concentrations for copper, lead, nickel, magnesium, manganese, zinc, and iron in lungs for CWP patients and controls were 1 : 1, 1.32 : 1, 2.20 : 1, 1.30 : 1, 1.06 : 1, 0.92 : 1, 2.58 : 1, respectively. There were significant differences in concentrations of lead, nickel, magnesium, iron by group(p<0.05). 4. There was no significant difference in metal concentrations of right upper lobe, right lower lobe, left upper lobe and left lower lobe for both CWP patients and controls (p>0.05, p>0.05). 5. In CWP patients lead was well correlated with nickel showing a rank correlation coefficient of 0.533, and zinc was correlated with copper showing a rank correlation coefficient of 0.476. 6. The concentrations of copper, nickel, maganese, and zinc in Korean CWP patients were lower than those in foreign CWP patients.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1944-1953
• /
• 2015

A novel alkaline protease from Streptomyces sp. M30, SapHM, was purified by ammonium sulfate precipitation, hydrophobic interaction chromatography, and DEAE-Sepharose chromatography, with a yield of 15.5% and a specific activity of 29,070 U/mg. Tryptic fragments of the purified SapHM were obtained by electrospray ionization quadrupole time-of-flight mass spectrometry. Nucleotide sequence analysis revealed that the gene sapHM contained 1,179 bp, corresponding to 392 amino acids with conserved Asp156, His187, and Ser339 residues of alkaline protease. The first 24 amino acid residues were predicted to be a signal peptide, and the molecular mass of the mature peptide was 37.1 kDa based on amino acid sequences and mass spectrometry. Pure SapHM was optimally active at 80℃ in 50 mM glycine-NaOH buffer (pH 9.0), and was broadly stable at 0-50℃ and pH 4.0-9.0. The protease relative activity was increased in the presence of Ni²⁺, Mn²⁺, and Cu²⁺ to 112%, 113%, and 147% of control, respectively. Pure SapHM was also activated by dimethylformamide, dimethyl sulfoxide, Tween 80, and urea. The activity of the purified enzyme was completely inhibited by phenylmethylsulfonyl fluoride, indicating that it is a serine-type protease. The K_m and V_max values were estimated to be 35.7 mg/ml, and 5 × 10⁴ U/mg for casein. Substrate specificity analysis showed that SapH was active on casein, bovine serum albumin, and bovine serum fibrin.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.377-386
• /
• 2016

The purposes of this research are to examine soil pollution in the nation and to explore the contaminated soil management of the public housing agency in public land for residential development. In so doing, the primary and secondary data were utilized, the former made use of the public data annually released by the Korea Ministry of Environment, and the latter relied on a self-administerd questionnaire survey conducted in the staff of the public housing agency, particularly those in charge of soil contamination in large-scale land, housing and urban development projects. The findings reveal that the national concentrations of 21 inorganic and organic soil contaminants (e.g., Cd, Cu, As, Hg, Pb, Cr, Zn, Ni, F, P, PCB, CN, Phenol, BTEX, TPH, TCE, PCE, Benzo(a)pyrene, and pH) in the land were extracted to be well below the risk level designated by the statutory guidance while industrial areas had them at a relatively modest level. In addition, the survey results indicate that the public housing agency didn't establish specific and clear guidelines for soil pollution and its remediation in the residential land development, so that contaminated sites have been primarily remediated by outsourcing companies. As the unexpected occurrence of contaminated sites causes the incurring expenses added to total project budget, the provision of both professional training and on-site manuals with the sufficient information on techniques and methods of soil contamination is critical to promptly and systematically deal with soil pollution.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.4
• /
• pp.439-454
• /
• 2008

The purpose of this study was to extensively identify $PM_{10}$ sources and to estimate their contributions to the study area, based on the analysis of the $PM_{10}$ mass concentration and the associated inorganic elements, ions, and total carbon. The contribution of $PM_{10}$ sources was estimated by applying a receptor method because identifying air emission sources were effective way to control the ambient air quality. $PM_{10}$ particles were collected from May to November 2007 in the Yongin-Suwon bordering area. $PM_{10}$ samples were collected on quartz filters by a $PM_{10}$ high-volume air sampler. The inorganic elements (Al, Mn, V, Cr, Fe, Ni, Cu, Zn, Cd, Pb, Si, Ba, Ti and Ag) were analyzed by an ICP-AES after proper pre-treatments of each sample. The ionic components of these $PM_{10}$ samples ($Cl^_$, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $NH_4^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) were analyzed by an IC. The carbon components (OC1, OC2, OC3, OC4, OP, EC1, EC2 and EC3) were also analyzed by DRI/OGC analyzer. Source apportionment of $PM_{10}$ was performed using a positive matrix factorization (PMF) model. After performing PMF modeling, a total of 8 sources were identified and their contribution were estimated. Contributions from each emission source were as follows: 13.8% from oil combustion and industrial related source, 25.4% from soil source, 22.1% from secondary sulfate, 12.3% from secondary nitrate, 17.7% from auto emission including diesel (12.1%) and gasoline (5.6%), 3.1% from waste incineration and 5.6% from Na-rich source. This study provides information on the major sources affecting air quality in the receptor site, and therefore it will help us maintain and manage the ambient air quality in the Yongin-Suwon bordering area by establishing reliable control strategies for the related sources.