• Korea Trade Review
• /
• v.47 no.4
• /
• pp.177-195
• /
• 2022

This study analyzed the volatility spillover effect between international non-ferrous metal futures markets using the BEKK-GARCH model. Statistical data are futures price data of copper (CU), aluminum (AL), nickel (NI), tin (SN) from Shanghai Futures Exchange (SHFE) and London Metal Exchange (LME) from April 1, 2015 to December 31, 2021. Combining the research results, first, in the case of copper, aluminum, and nickel, it was found that there was a two-way volatility spillover effect between the Shanghai and London markets, and the international influence of the London market was greater. Second, in the case of the tin, it was found that the Shanghai market has a volatility spillover effect on the London market from stage I, and it is strengthened in stage II. Third, in the case of nickel, it was found that there was a two-way volatility spillover effect in the first stage, but in the second stage, the London market had a unidirectional volatility spillover effect with respect to the Shanghai market. This study confirmed that China's influence in the international non-ferrous metal futures market is gradually increasing. In addition, it suggested that international investors can engage in arbitrage and hedging using China's non-ferrous metal futures market.

• Analytical Science and Technology
• /
• v.37 no.4
• /
• pp.239-250
• /
• 2024

This study reports the synthesis of a bi-dentate Schiff base ligand (L), 7-(2-((2-formylbenzylidene) amino)-2-phenylacetamido)-3-methyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, prepared from phthalaldehyde and cephalexin antibiotic. The synthesized Schiff base ligand (L) and the secondary ligand alizarin (Az) are used to prepare the new complexes [M(Az)₂(L)] and [Cr(Az)₂(L)]Cl, where M = Mn(II), Co(II), Ni(II), Cu(II), and Zn(II). The mode of bonding of the Schiff base has been characterized by UV-Visible, FT-IR, Mass, ¹H-, and ¹³C-NMR spectroscopic techniques, and micro elemental analysis (CHNS). The complexes were characterized using UV-Vis, FT-IR, molar conductance, magnetic moment, and thermal analysis (TG/DTG). The molar conductance data revealed that the complexes are non-electrolytes except for [Cr(L)(Az)₂]Cl, which is an electrolytic type 1:1. The Schiff base and its complexes have been tested for their biological activity against two strains of bacteria and one fungus. When screened against gram-positive and gram-negative pathogens, the Az and L ligands and their complexes showed potential antimicrobial activity.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.3
• /
• pp.93-108
• /
• 2013

This study is aimed to prepare the effective detail survey methods(Phase II) of abandoned metal mines through the contamination assessment for mine types and facilities in the abandoned metal mine areas. The study sites of 12 abandoned mines are located in Gyeonggi-do and Gangwon-do and those were chosen among 310 sites that the Phase II survey was conducted from 2007 to 2009 after considering the results of Phase I for abandoned mines scattered all over the country. 12 study sites were classified into four types; Type I sites only have pit mouth. Type II sites have pit mouth and mine-waste field. Type III sites have pit mouth and tailing sorting field. Type IV sites have pit mouth, tailing sorting field and concentrator(s). In forest land, paddy soil and farm land of Type I, As and Cd were showed average concentration, and Cu and Pb were high on the pit mouth area in one mines where the pit mouth was developed within 500 m. In the mines of Type II, Cu and Pb were showed average concentration too, but As and Cd were slightly high in pit mouth and mine-waste field. The mines of Type III which had grinding particle process through physical separation milling or hitting showed similar tendency with Type II. However, mines of Type IV pit mouth, mine-waste field and showed various results depending on defining the contamination sources. For example, if contamination source was pit mouth, the mixed results of Type I, II, II were showed. In tailing sorting field which was regarded as the most important source and having high mobility, however, if there were no facilities or it was difficult to access directly, field sampling was missed occasionally during phase I and phase II survey. For that reason, the assessment for tailing sorting field is missed and it leads to completely different results. In the areas of Type I mines, the concentration of heavy metals exceeded precautionary standards of soil contamination or not within 1,000 meters of pit mouth. Nickel(Ni) was the largest factor of the heavy metal contamination in this type. The heavy metals except Arsenic(As) were shown high levels of concentration in Type II areas, where pit mouth and mine-waste field were operated for making powder in upriver region; therefore, to the areas in the vicinity of midstream and downstream, the high content of heavy metals were shown. The tendency of high level of heavy metals and toxic materials contained in flotation agent used during sorting process were found in soil around sorting and tailing field. In the abandoned-pit-mouth area, drygrinding area and tailing sorting field area, the content of Cupper(Cu) and Zinc(Zn) were higher than other areas. Also, the contaminated area were larger than mine reclamation area(2,000 m) and the location of tailing sorting field was one of the important factors to estimate contaminated area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.644-649
• /
• 2010

The main objective of this research was to evaluate physicochemical properties of commercially available fertilizer manufactured with different sources (swine, cattle, poultry, and mixed manure) in Korea. Results of this research showed that average content of organics was ranged 39.11-40.78% depending on different sources with the highest value in swine manure. Average water contents in fertilizer was ordered swine > cattle > mixed > poultry, and ranged 37.00-42.16%. Total of 8 heavy metals (As, Cd, Hg, Pb, Cr, Cu, Ni, and Zn) were investigated and no significant difference was observed for average concentration of heavy metals depending on different sources except Zn and Cu. For both heavy metals, fertilizer manufactured with swine manure showed higher concentration (346.34 mg/kg for Zn and 117.00 mg $kg^{-1}$ for Cu) than other fertilizers mainly due to feed contents. More long term monitoring would be necessary to make best management practice for commercially available fertilizer in Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.4
• /
• pp.318-324
• /
• 2017

Lime bordeaux mixture (LBM) and lime sulfur mixture (LSM) are representative environmental friendly organic materials for prevention of insect pests in South Korea. Recently, those have been widely used as an alternative for chemical pesticides in eco-friendly farms. However, South Korea has not established even recommendation of LBM and LSM considering the stability of heavy metals in soil. The aim of this study was to evaluate the accumulation of hazardous heavy metals in soil and plant with long-term application of LBM and LSM. Firstly, we investigated the amount of LBM and LSM used per year in several eco-friendly farms to determine a standard application rate of both materials. The pepper plant was grown on the pot in greenhouse for 14 weeks. Both materials were applied at 0, 1, 3, and 9 times of standard application rates (2.56 and $1.28L\;ha^{-1}$ of LBM and LSM per year, respectively). Dry matter yield of pepper and heavy metals (As, Cd, Cu, Hg, Ni, Pb, and Zn) concentration in soil and pepper plant were measured after 14 weeks. Yield of pepper plant did not significantly chang with up to application rate of 1 times, thereafter it markedly decreased with more than 3 times. With increasing LBM and LSM application, the concentration of Cu and Zn in soil significantly increased. Especially, Zn concentration in pepper significantly increased with increasing application rates of both materials. This might resulted in significant decrease in dry matter yield of pepper. The concentrations of those heavy metals in soil did not exceed safety levels ($150mg\;kg^{-1}$ for Cu and $300mg\;kg^{-1}$ for Zn) established by the Korean Soil Environmental Conservation Act as well as concentration of heavy metals in pepper plant by Korean Ministry of Food and Drug Safety. However, particular attention should be paid for heavy metal safety and crop productivity when using LBM and LSM in the organic farm.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.2
• /
• pp.141-145
• /
• 2018

BACKGROUND: Agricultural soils are vulnerable from contamination of heavy metal derived from industrial waste. Monitoring on heavy metals on agricultural soils around industrial complexes and evaluation on distributional state on the concentrations of heavy metals in soil have been carried out for problem assessment on soil condition. METHODS AND RESULTS: Soil samples of 1,200, were collected from sixty site of industrial complexes located Gyounggi, Chungbuk, Cheonbuk, and Gyoungnam provinces. Total concentration of Cu, Pb, Zn, Ni, and As were analyzed. Heavy metal concentrations in most soil samples were below warning criteria, except 1 site of Pb, Ni, and As, separately. The comparison of mean values of heavy metal concentrations between soils around industrial complexes and paddy soils, showed similar levels of heavy metals, except Pb. The concentrations of lots of heavy metals were distributed between from warning criteria to one fifth level of warning criteria. However, in the case of Cu and Pb, more than 30% were distributed below one twenties level of warning criteria. These results were very similar with the distribution state of heavy metals in upland soils. The concentrations of heavy metals in surface soil and subsoil were similar among the heavy metals in soils around industrial complexes. CONCLUSION: The concentrations of heavy metals in soils around industrial complexes were distributed close to warning criteria. Long term and continous monitoring and evaluation on heavy metals in agricultural soils are required for food safety and sustainable soil management.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.493-502
• /
• 2012

Objectives: The purpose of this study is to investigate the mass concentration of nanoparticles and understand the characteristics of elements of heavy metal concentrations within nanoparticles in the air using Micro-Orifice Uniform Deposit Impactor Model-110 (MOUDI-110), based on indoor and outdoor air. Methods: This Study sampled nanoparticles using MOUDI-110 indoors (office) and outdoors at S University in Asan, Korea in order to reveal the concentration of nanoparticles in the air. Sampling continued for nine months (10 times indoors and 14 times outdoors) from March to November 2010. Mass concentrations of nanoparticle and concentrations of heavy metals (Al, Mn, Zn, Ni, Cu, Cr, Pb) were analyzed. Results: Indoors, geometric mean concentration of nanoparticles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 0.929 ${\mu}g/m^3$ and 1.002 ${\mu}g/m^3$, respectively. On the other hand, the levels were lower outdoors with 0.819 ${\mu}g/m^3$ and 0.597 ${\mu}g/m^3$. Mann-Whitney U tests showed that the difference between the indoors and the outdoors was statistically meaningful in terms of particles of 0.056 ${\mu}m$ or less (p<0.05) in size. These results are possibly influenced by the use of printers and duplicators as the factor that increased the concentration of nanoparticles. In seasonal concentration distribution, the level was higher during the summer compared to in the autumn. Those of 0.056 ${\mu}m$ or less in size presented a statistically meaningful difference during the summer (p<0.05). These results may be influenced by photochemical event as the factor that makes the levels high. Regarding zinc, among the other heavy metals, the fine particles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 1.699 $ng/m^3$ and 1.189 $ng/m^3$ in the outdoors. In the indoors, the levels were lower, with 0.745 $ng/m^3$ and 0.617 $ng/m^3$. Cr and Ni at the size of 0.056 ${\mu}m$ or less, both of which have been known to pose severe health effects, recorded higher concentrations indoors with 0.736 $ng/m^3$ and 0.177 $ng/m^3$, compared to 0.444 $ng/m^3$ and 0.091 $ng/m^3$ outdoors. By season, Zn, Ni, Cu and Pb posted a high level of indoor concentration during the fall. As for Cr, the level of concentration indoors was higher than outdoors both during the summer and the autumn. Conclusion: This study indicates the result of an examination of nano-sized particles and heavy metal concentrations. It will provide useful data for the determination of basic nanoparticle standards in the future.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.190-198
• /
• 2008

There is an increasing concern over heavy metal contamination of paddy soils and the subsequent translocation of heavy metals to rice. Objective is to monitor the status and long-term trend of heavy metal contamination in paddy soils, periodically. In 2007 survey, the average concentrations of As(arsenic), Cd(cadmium), Cu(copper), Ni(nickel), Pb(lead), and Zn(zinc) in 2,010 paddy soils nationwide were 0.87, 0.08, 3.33, 1.19, 4.95 and $4.67mg\;kg^{-1}$, respectively. Few sites, which were contaminated by As in 2003 and 2007 survey and by Ni in 1999 and 2007 survey, were over the threshold level for soil contamination designated by the Soil Environmental Conservation Act in Korea. Long-term change was shown that As, Ni, and Zn were gradually increased whereas Cd and Cu were decreased. In the distribution of extractable heavy metal contents, the modes of each heavy metal content were similar with the average contents of each heavy metals. Mean value of heavy metals except copper in paddy soils was higher than median value. It means that the downward distribution of heavy metal content in paddy rice was shown against normal distribution.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.399-403
• /
• 1997

Changes of nutrient material and natural supplies by sediment of irrigation water into 1.0ha of paddy field during the rice cultivation were investigated. TSS of the sediment contained irrigation water ranged 52.9${\sim}$125.6mg/L and content of organic matter showed 1.89${\sim}$2.33%. Content of T-N, $NH_4-N$ and $NO_3-N$ were 623.5${\sim}$1775.2, 22.9${\sim}$75.8 and 10.2${\sim}$72.1mg/kg respectively. Content of T-P and ortho-P were 186.7${\sim}$375.7 and 12.4${\sim}$38.9mg/kg respectively. The content of exchangeable canons, $Ca^{++},\;Mg^{++}\;Na^+\;and\;K^+$ were 435.3${\sim}$737.5, 127.3${\sim}$204.2, 36.6${\sim}$94.9 and 105.6${\sim}$232.9mg/kg respectively. Total content of heavy metals were 13.4 of Pb, 0.6 of Cd, 8.2 of Ni, 12.1 of Cu, 29.8 of Zn and 19.7mg/kg of Cr. During the period of rice cultivation, when supplied 4,250m^3 of an irrigation water into 1.0ha of paddy field, natural supplied 346.01kg of sediment, 7.11kg of organic matter, 0.50kg of T-N, 0.02㎏ of NH_4-N, 0.01kg of NO_3-N, 0.08kg of T-P and 0.01㎏ of Ortho-P. Also exchangeable $Ca^{++},\;Mg^{++}\;Na^+\;and\;K^+$ were supplied 0.21, 0.06, 0.02 and 0.06kg respectively. Loaded of the total heavy metal showed natural background level.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.148-153
• /
• 2010

This study was carried out to investigate the effect of extraction methods on the physicochemical characteristics using seed oil of wild green tea (Camellia sinensis). When the solvent extraction method after grinding and steam treatment (SGS) was used for oil extraction, the yield was highest. The specific gravity was a range of $0.91{\sim}0.94g/cm^{3}$ irrespective of extraction methods of oil. However, the light in the solvent extraction method after grinding (SG), the red in the pressure extraction method after grinding and roasting treatment (PGR), and the yellow in SG method were highest. Among various fatty acids, the concentrations of C16 : 0, C18 : 1 and C18 : 2 were highest, irrespective of extraction methods. Especially, the C16 : 0 concentration was in the order of SG (34.78%), SGS (23.04%), and PRGS method (23.01%), the C18 : 1 concentration was in the order of PGR (43.35%), SGS (42.7%), SG method (39.0%), and in the case of C18 : 2, it was in order of PGR (23.15%), SGS (23.03%), and SG method (15.01%). The saturated fatty acid concentration was in the order of SG (40.59%), PGR (31.61%), and SGS method (30.1%). On the other hand, in the case of the unsaturated fatty acid, it was in the order of SGS (69.9%), PGR (68.39%), and SG method (59.41%). The acid values in the SGS and SG method after 10 days of storage were in the range of 6~8 mgKOH/g. However, in the case of PGR method, it was increased with the increase of storage time and was 49.3 mgKOH/g after 60 days. The peroxide values in the SGS and SG method were in the range of 60~100 mEq/g from 10 to 60 days of storage. On the other hand, when the storage time was increased from 10 to 30 days, it was sharply increased from 60 to 240 mEq/g. The rancidity was in the order of $Fe^{2+}$, $Cu^{2+}$, $Cr^{2+}$, $Zn^{2+}$ and $Ni^{2+}$, irrespective of extraction methods. Especially, when butylated hydroxyanisole (BHA) was added into oil containing 1.0 ppm of <$Fe^{2+}$, the peroxide value was decreased from 539.4 to 216.6%. These results show that seed oil of Camellia sinensis grown in Iksan can be applied as sources for cosmetics, detergents, food, and pharmaceuticals.