• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.123.2-123.2
• /
• 2017

Fe-Ni-Cu 합금 전주를 위하여 황화물 용액에의 상의 열역학적 안정도를 작성하고 전주 조건을 선정하였다. $Fe-Ni-Cu-S-H_2O$ 용액의 열역학적 상의 안정도를 전산모사하기 위한 프로그램은 C#으로 작성하였다. JANAF 자료를 근거한 적정 전주 조건은 $130mA/cm^2$, $50{\sim}55^{\circ}C$, pH 2.4 이었다. XRF을 이용한 Fe-Ni-Cu의 합금 도막의 평균 조성은 Fe-42Ni-1Cu [wt.%] 이었다, 전류밀도가 낮아질수록 Ni과 Cu량은 증가하였다. 구리 농도가 증가하면 표면조도는 60 nm로 변화하였다.

• The Korean Journal of Pharmacology
• /
• v.19 no.2
• /
• pp.35-44
• /
• 1983

reactive oxygen species에 의해 나타나는 reactivity에 있어서 metal ions이 관여함이 시사되고 있다. 이미 알려진 reactive oxygen species와 metal ions의 상호작용 이외에 특히 $Cu^{++}$과 $H_2O_2$가 강력한 peroxidative action을 나타낸다는 사실이 알려져 있으며 $Cu^{++}-H_2O_2$가 biological system 에서의 조직파괴에 관여할 가능성이 저자들에 의해서 효소 및 조직치 구조 단백질의 gradation 효과를 관찰함으로써 시사되었다. 본 연구는 $H_2O_2$ 혹은 $H_2O_2$를 생성하는 효소계(xanthine과 xanthine oxidase 및 glucose과 glucose oxidase)에 $Cu^{++}$을 첨가하여 $Cu^{++}-H_2O_2$에 의한 peroxidation의 효과를 collagen gelation을 통하여 확인코저 수행하였으며 다음과 같은 결과를 얻었다. 1) $Cu^{++}(20\;{\mu}M)$과 $H_2O_2$에 의하며 collagen gelation은 현저히 억제되었으며 이같은 억제효과는 양자의 농도에 비례하였다. 2) $Cu^{++}-H_2O_2$ reactivity를 확인하는 다른 방법으로 glucose oxidase system를 이용하였다. glucose oxidase$(2.5{\mu}g/ml)$ 와 glucose(0.5 mM)는 collagen gelation에 영향을 미치지 않았으나 이에 $Cu^{++}$이 존재하면 gelation이 억제되었다. 이때 억제정도는 $glucose(0.125{\sim}l.25\;mM)$와 $Cu^{++}$의 농도에 비례하였다. 3) 여러 reactive oxygen species 가운데 $Cu^{++}-H_2O_2$ reactivity를 xanthine oxidase system을 이용하여 확인하였다. (a) collagen gelation은 xanthine oxidase(30 munits/ml)와 xanthine$(0.25{\sim}2\;mM)$에 의하여 억제되었다. (b) 이때 나타나는 collagen gelation의 억제는 superoxide dismutase에 의하여 완전히 회복되었으나 catalase에 의해서는 더욱 촉진되었다. 그러나 catalase에 의한 억제효과의 촉진은 1,4-diazabicyclo(2,2,2)octane에 의하여 완전히 소실되었다. 따라서 이 xanthine oxidase system에서는 $O_2-,\;H_2O_2,\;^1O_2$이 관여함을 알 수 있었다. (c) 그러나 $Cu^{++}(10\;{\mu}M)$이 존재하였을 때 collagen gelation은 superoxie dismutase에 의해 더욱 억제되었고 catalase에 의해서는 완전히 회복되었다. xanthine oxidase계에서 얻어진 결과는 여러 reactive oxygen species가운데 $H_2O_2$가 $Cu^{++}$에 의하여 peroxidation효과를 나타냄을 알 수 있었다. 이상의 결과로 미루어 볼 때 reactive oxygen species와 metal ions과의 상호작용 가운데 $Cu^{++}-H_2O_2$는 강한 반응을 나타내는 특이한 구성요소이고 헌재 시사되고 있는 reactive oxygen species의 biological effects에 비추어 $Cu^{++}-catalyzed peroxidation$도 병적상태에서 생체에 유해한 작용을 나타내는 요소임을 시사하며 특히 염증시 조직파괴역할에 관하여 고찰하였다.

• Applied Microscopy
• /
• v.26 no.2
• /
• pp.235-241
• /
• 1996

Amophization and decomposition behaviour in $Mg_{62}Cu_{26}Y_{12}$ alloy prepared by melt spinning method and wedge type metal mold casting method have been investigated by a detailed transmission electron microscopy. Amorphous phase has formed in melt-spun ribbon. In the case of the wedge type specimen, however, the amorphous phase has formed only around the tip area within about 2 mm thickness. The remaining part of the wedge type specimen consists of crystalline phases, $Mg_{2}Cu\;and\;Cu_{2}Y$. The supercooling for crystallization behaviour of the amorphous $Mg_{62}Cu_{26}Y_{12}$ alloy, ${\Delta}T_x$ has been measured to be about 60 K. Such a large undercooling of the crystallization bahaviour enables formation of the amorphous phase in the $Mg_{62}Cu_{26}Y_{12}$ alloy under the cooling rate of $10^{2}K/s$. The amorphous $Mg_{62}Cu_{26}Y_{12}$ has decomposed into crystalline phases, $Mg_{2}Cu\;and\;Cu_{2}Y$ after heat treatment at $170^{\circ}C\;and\;250^{\circ}C$.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.6
• /
• pp.276-281
• /
• 2006

In order to improve the performance of PPFs (Pre-Plated Frames), a PPF that employed a Cu-Sn alloy instead of conventionally used Ni was developed and then its properties were investigated. It was found that the electoplated Cu-Sn alloy layer was a mixture of uniformly distributed fine crystallites, resulting In better wettability and crack resistance than those of Ni PPF. Moreover, as in Cu/Ni/Pd/Au PPF, migration of copper atoms from the base metal to the top of the Cu/Cu-Sn/Pd/Au PPF surface was not found although the Cu-Sn layer itself contained considerable amount of copper. It was expected that, by using the newly developed Cu-Sn PPF, any possible heat generation and signal interrupt caused by an external electro-magnetic field could be reduced because the Cu-Sn layer was paramagnetic, i.e., nonmagnetic.

• Korean Journal of Metals and Materials
• /
• v.47 no.4
• /
• pp.217-222
• /
• 2009

Cu as a tramp element has been reported to encourage transverse cracking upon straightening operation during continuous casting or mini-mill processing. Therefore, the hot workability of steels containing Cu should be investigated. The purpose of the present study was to examine the effect of Cu contents on the hot ductility of low carbon steels by using hot compression test. Hot compression test was carried out using a Gleeble. The specimens were heated to $1300^{\circ}C$ for solution treatment and then held for 300s before cooling at a rate of $1^{\circ}C/s$ to test temperatures in the range of $650{\sim}1150^{\circ}C$ ($50^{\circ}C$ intervals) with strain rate of $5{\times}10^{-3}/s$. In Cu containing steels, the hot ductility was decreased with increasing Cu content at high temperature region which is to be attributed to copper enriched phase formed at scale/steel interface, and low hot ductility with increasing Cu content at low temperature region is attributable to the strengthening of matrix by the formation of ${\varepsilon}-Cu$. The width of ductility trough region was decreased with increasing Cu content.

• Current Photovoltaic Research
• /
• v.8 no.1
• /
• pp.27-32
• /
• 2020

CuS thin films were deposited on glass substrates at room temperature by RF magnetron sputtering. The structural and optical properties of CuS thin films grown by varying RF-power from 40 W to 100 W were studied. From the XRD analysis, we confirmed hexagonal crystal structures grown in the preferred orientation of the (110) plane in all CuS thin films, and the intensity of the main diffraction peak increased in proportion to the increase of RF-power. In the case of CuS thin film deposited at 40W, small-sized particles formed a thin and dense surface morphology with narrow pore spacing, relatively. As the power increased, the grain size and grain boundary spacing increased sequentially. The peaks for the binding energy of Cu 2p_3/2 and Cu 2p_1/2 were determined at 932.1 eV and 952.0 eV, respectively. The difference in binding energy for the Cu²⁺ states was the same at 19.9 eV regardless of process parameters. The transmittance and band gap energy in the visible region tended to decrease with increasing sputtering powers.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.122-126
• /
• 1997

the Cu/polyimide system is known to be the best candidate for a multilevel interconnection system due to the low resistance of Cu and to the low dielectric constant of polyimide respectively. Ion beam mixing of Cu(40nm)/polyimide was carried out at room temperature with 80 keV Ar+ and N2+ form $1.5\times$1015 to 15$\times$1015 ions/cm2. The quantitative adhesion strength was measured by a standard scratch test. X-ray photoelectron spectroscopy and x-ray emission spectrocopy are employed to investigate the chemical bonds and the interlayer compound formation of the films Cu/Al/polyimide showed more adhesion strength than Cu/polyimide after ion beam mixing and N2+ ions are more effective in the adhesion enhancement than Ar+ with the same sample geometry. The XES results shows the formation of interlayer compound of CuAl2O4 which can reflect more adhesive Cu/Al/polyimide which has not been reported previously. The latter results is understood by the fact that N2+ ions produce more pyridinelike moiety, amide group and tertiary amine moiety whcih are known as adhesion promotors.

• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.379-384
• /
• 1996

The H2S sensing mechanism of CuO-SnO2 was confirmed by analyzing the electrical-resistance variation with temperature under an H2S atmosphere. While the resistance of CuO-SnO2 thick film at N2+H2S atmosphere was almost invariant with change in temperature it increased with increasing temperature for air +H2S atmos-phere. This behavior was analyzed using an equation derived from a basic assumption based on the H2S sensing mechanism proposed before. the experimental results are sufficiently explained with the equation derived which showed that the H2S sensing mechanism was reasonable. The equation also gave a detailed analysis and physical meaning to the behavior of the resistance variation with change in H2S concentration.

• Current Photovoltaic Research
• /
• v.2 no.2
• /
• pp.69-72
• /
• 2014

We investigated current-voltage (I-V) and capacitance (C)-V characteristics of solution-processed thin film solar cells, consisting of $Cu(In,Ga)S_2$ and $CuInS_2$ stacked absorber layers. The ideality factors, extracted from the temperature-dependent I-V curves, showed that the tunneling-mediated interface recombination was dominant in the cells. Rapid increase of both series- and shunt-resistance at low temperatures would limit the performance of the cells, requiring further optimization. The C-V data revealed that the carrier concentration of the $CuInS_2$ layer was about 10 times larger than that of the $Cu(In,Ga)S_2$ layer. All these results could help us to find strategies to improve the efficiency of the solution-processed thin film solar cells.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.6
• /
• pp.663-668
• /
• 2021

For the development of highly efficient quantum dot-sensitized solar cells (QDSCs), it is important to enhance the electrocatalytic activity of the counter electrodes (CEs). Herein, a fabrication process of Cu₂S CEs are optimized for the development highly efficient QDSCs. The surface of brass film is treated with HCl solution to prepare the Cu₂S CEs, and the concentraion as well as the temperature of HCl solution are controlled. It is found that the uniformity for the thickness of prepared Cu₂S CEs is enhanced when the diluted HCl solution is used, compared to the HCl solution of standard concentration. In addition, the electrocatalytic activity of the Cu₂S CEs is also increased with the modificed process, which is confirmed by impedance data and Tafel polarization curves. As a result, the photoconversion efficiency of QDSCs is improved from 4.49% up to 5.73%, when the concentraion and temperature of the HCl treatment are efficiently optimized.