• Analytical Science and Technology
• /
• v.22 no.3
• /
• pp.235-246
• /
• 2009

The analyses of minor and trace elements in glass debris were performed using LA-ICP-MS in order to identify manufacturers using real commercial samples. At first, a calibration curve was made using standard glass samples of NIST 610, 612, 614 and 616. $^{29}Si$ was used as an internal standard, and the ratios of metal/Si for each metal were compared with their concentrations. Based on elements in each sample and standard materials, 24 metals were quantified and the LOD in analysis, according to the blank sample, was in the range of 0.11 mg/kg (Ti)-4.91 mg/kg (Ca). Eleven samples from two manufacturers were collected and five sub-samples were taken from each sample for analysis. 15 elements (Co, Ce, Ca, Mn, Sr, Ba, Li, Rb, U, La, Th, Na, Al, Zr and Hf) were selected to identify manufacturers because some elements (Cu, Cr, Cd and Ni) were below the detection limit and some elements (Ti, Pr, Mg, Nb, Nd) were absent in the analysis of standards and others (Pb and Sn) had a problem of homogeneity. The attempts to identify manufacturers and the manufacturing period were performed through a triangular diagram. In the manufacturer discrimination by discriminant analysis, a canonical discriminant function was made based on Mn, Ce and Rb, and each sample could be identified.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.6
• /
• pp.764-771
• /
• 2013

The metal component of Chinese and Korean traditional gold thread was analyzed nondestructively using P-XRF and classified morphologically. In the nondestructive analysis of 22 Chinese and Korean artifacts, there were 10 gold threads made up of Au in China and 7 in Korea; in addition, there were 4 silver threads made up of Ag in Korea and 1 copper thread made up of Cu in China. In the morphological classification, 7 gilt paper strips were confirmed in China and Korea and 4 wrapped threads were identified in China and Korea. Zn, Sn and Fe (minor components of the threads) were detected. These components were assumed to be transferred from the metal found in burial goods.

• Tribology and Lubricants
• /
• v.9 no.2
• /
• pp.49-55
• /
• 1993

The dry sliding wear properties of the sintered Cu-10 wt%Sn bronze alloys reinforced with $SiC_w$ and $SiC_p$ were investigated by a pin-on-disc wear testing machine. The worn surfaces and the cross sections of the wear specimens and the wear debris were observed by SEM to study the effect of the variation of the ceramic phase contents in the composite and the wear condition on the wear behaviors. The wear of bronze matrix was dominated by the adhesive wear. The transition from mild to severe wear was found in the bronze matrix specimens at the applied load higher than 20N where the surface delamination caused the severe wear. The addition of $SiC_w$ and $SiC_p$ reinforcements in the romposites was proved to reduce the wear rate by the matrix strengthening at the applied load higher than 20N. SiC whiskers having a large length to diameter ratio which hold the deformed matrix were effective to hinder the crack propagation near the worn surface. Thus the maximum wear resistance was obtained in the composite reinforced by $SiC_w$ at the higher applied load.

• Conservation Science in Museum
• /
• v.7
• /
• pp.3-10
• /
• 2006

The bronze bowl with lid excavated from Eunnyeongchong Tumulus in Gyeongju had been united in the past and then damaged. We removed deteriorated adhesive and other impurities from it and reunited it. Some fragments of the artifact has been lost; in particular, only half of the whole main body remains. Therefore, it needed restoration treatment for exhibition and conservation. The lid, relatively much part of which remains, was treated with the method that could easily detach the restored part; the main body with much restored part was united using epoxy resin so that the restored part could well bear the weight of the artifact.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1346-1350
• /
• 2012

Contact wire is one of the most important components supplying electricity to railroad cars. At the beginning of the research on contact wire, wear problem caused by friction between contact wire and pantograph was considered even more important issue for the failure of contact wire. However, since several fatigue fractures were reported from Shinkansen in Japan, fatigue fracture has become another important issue for the failure of contact wire. Despite of its importance, standard of the fatigue test of contact wire has not been established yet. Thus, fatigue characteristics of contact wire is very difficult issue to evaluate quantitatively. Hence, in this study, test method simulating operating conditions of contact wire by Minsung Kang and etc. is used to evaluate the fatigue characteristics of copper alloy contact wire. Also, test results is compared with the result of Minsung Kang's research on pure copper contact wire.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.42-50
• /
• 2008

The objective of this study is to investigate the efficacy of pomegranate hull colorant as a natural hair coloring dye. The extract of pomegranate hull was concentrated and freeze-dried to get colorant powder. Effect of dyeing condition and mordanting on the dye uptake of hair by using Al, Fe, Cu, Cr, Sn compounds, color change and colorfastness were explored. In addition, tensile strength was measured and the surface of the hair was observed. Dye uptake of hair measured by K/S value (400 nm) indicated that ionic bonding seems to be involved in the sorption of pomegranate colorant to hair. Maximum sorption was obtained at pH 3.5 and the concentration of 50% (on the weight of hair, o.w.h.). Acidic dyeing condition (pH $3.5{\sim}5.0$) showed yellow color however alkaline dyeing condition (pH $7{\sim}11$) gave reddish yellow color. Pomegranate hull colorant produced greyish brown color on hair and the hair mordanted with Fe showed dark brown color. Mordants except Fe did not increase dye uptake significantly. Mordants except Cu increased light fastness and mordants except Cr increased washing fastness level slightly. According to SEM observation and the tensile strength retention measurement, the mordant dyed hair gave more damage to hair by ultraviolet light and washing than the hair dyed without mordanting. Experimental results of K/S value and colorfastness(light and washing) supported that pomegranate hull colorant without mordanting can be used as a semi-permanent natural hair coloring dye.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.1-4
• /
• 2012

Effects of artificial holes on the cooling efficiency of single grain YBCO bulk superconductors were studied. Single grain YBCO bulk superconductors without artificial holes, with six 2.4 mm holes and six holes filled with Bi-Pb-Cd-Sn metal solder were fabricated by a top-seeded melt growth process for powder compacts with/without holes. Simulation for the cooling rate to a liquid nitrogen temperature (77 K) of YBCO samples was carried out using a finite element method (FEM) and the results are compared with the actual cooling rates of samples in liquid nitrogen. The simulated cooling times for the YBCO sample without holes, with six holes and with six holes filled with the metal solder were 80, 47 and 75 sec. respectively, which are similar to the actual cooling times of 84, 52 and 78 sec. estimated for the same samples cooled in liquid nitrogen. The shorter cooling time of the sample with artificial holes are attributed to the increased surface areas associated with the presence of artificial holes. The metal filling into the holes did not give any remarkable effect on the cooling efficiency.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.2042-2049
• /
• 2019

Ten gizzard and three flesh samples of the broiler were collected from different locations in Tehsil Gujar Khan District Rawalpindi, Pakistan. The samples were dried, crushed and ground. Pellets were prepared by pressing the powder of the samples and that of the Bovine liver 1577c reference material obtained from NIST, USA. Proton induced X-ray emission (PIXE) installed at National Center for Physics, Islamabad, Pakistan has been used as a reliable and improved technique to determine concentration of various major/trace and toxic elements e.g. S, Cl, K, Ca, Cl, Fe, Cu, Mn, Co, Zn, Ti, Cd, Ga, Cr, V and Ni, in the Gizzard and Flesh samples of the broiler. The concentrations of all the detected elements in the samples are statistically significant. The certified and measured values of the elements in the reference material were in agreement with each other within a deviation of 7%. S, Cl, K and Ca are within tolerable limits and are good for human consumption. Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn were more than the acceptable limits of World Health Organization, WHO whereas Ga, As, Sn, Sb and Pb are not detected in most of the samples.

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.241-249
• /
• 2011

Cotton fabrics was treated with persimmon juice by padding and their dyeability and functionality were assessed including antibacterial activity and deodorization ratio. The merit of padding-based dyeing was easier color reproduction over traditional hand dyeing where various colors and color fastness to light and laundering are hard to obtain. With larger number of padding, the dyed fabrics showed deeper red-yellow colors, which had low brightness and high chromatic colors. The dyed cotton fabrics had a perspiration fastness of 4~5 rating, a rubbing fastness of 3~4 rating, and a washing fastness of 4 rating, As the number of padding and exposed time to sunlight or UV light increase, the values of K/S and ${\Delta}E$ increased and the colors became much deeper gradually. The color development had completed about 70 hours exposure to UV. Among the light sources, the dyed fabrics exposed to UV light showed deeper yellow-red color than those of exposed to sunlight. The cotton fabrics treated with premordants like Al, Cr, Cu, and Sn revealed strong yellow colors, especially the fabrics treated with Fe mordant showed greenish red-yellow colors. As the padding times of dyeing with persimmon juice increased, stiffness and water repellent property were enhanced in warp and weft directions, respectively. Also, the dyed fabrics have good antibacterial activity and deodorization.

• Tribology and Lubricants
• /
• v.28 no.4
• /
• pp.173-177
• /
• 2012

We used contact resonance force microscopy (CRFM) technique to determine the quantitative elastic properties of multiple materials integrated on the sub micrometer scale. The CRFM approach measures the frequencies of an AFM cantilever's first two flexural resonances while in contact with a material. The plain strain modulus of an unknown or test material can be obtained by comparing the resonant spectrum of the test material to that of a reference material. In this study we examined the following bumping materials for flip chip by using copper electrode as a reference material: NiP, Solder (Sn-Au-Cu alloy) and under filled epoxy. Data were analyzed by conventional beam dynamics and contact dynamics. The results showed a good agreement (~15% difference) with corresponding values determined by nanoindentaion. These results provide insight into the use of CRFM methods to attain reliable and accurate measurements of elastic properties of materials on the nanoscale.