• 약학회지
• /
• 제47권3호
• /
• pp.135-141
• /
• 2003

The majority of table salts are bay salts and chemical salts. However, chemical salts are known to have a different composition in biological electrolytes and quality of bay salts are getting worse due to the increasing seawater contamination. These facts may have led to the increasing usage of various health-promoting salts. Bamboo salt was introduced in 1986 as a solution to replace table salts to eliminate those detrimental effects, to promote general health and to treat diseases. Although all bamboo salts from different manufacturers have been used for the same health and medical purposes, each manufacturer utilizes different manufacturing process. The ICP analysis was used to study the changes of elemental contents in a bamboo salt during the manufacturing steps as well as these contents in various bamboo salts and other salts. After the first step, contents of Li and Sr in the bamboo salt were increased in comparison with those in the raw material, bay salt. As the next steps continued, contents of K, Ca and Ba were continuously increased. At the completion of the final step, contents of Mg and P were decreased and those of Cu, Mn and Mo were gradually increased. Bamboo salts contained lower contents of Mg, Al, B, and P, but higher contents of K, Ca, Fe, Cu, Mn, Zn, Li, Ba, Sr and Mo than bay salt.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.312-318
• /
• 2001

다발체 형성과 인발 공정으로 제조된 Cu-Nb 필라멘트 미세복합재료의 기계적 전기적 특성에 대하여 연구하였다. Nb의 함량이 증가함에 따라 강도는 점차 증가하였으나 연성은 Nb의 함량에 무관하였다. 293K와 75K에서의 항복강도의 비율은 Cu-Nb 미세복합재료의 Young의 계수 비율과 비슷하게 관찰되었다. 이러한 사실은 주로 장범위 방해물(athermal obstacles)들이 Cu-Nb 마세복합재료의 강도에 영향을 미친다는 것을 의미한다. 파면 조직관찰 결과는 Cu-Nb 미세복합재료는 Nb의 함량에 판관계없이 연성파괴의 특성을 나타내었으며, 부전선재 (subelematal wires)사이의 계면을 따라 발생하는 2차크랙 (secondary crack) 의 양은 Nb 함량이 증가함에 따라 증가하였다. 전기 전도도와 비저항비 (${\rho}_{293k}/{rho}_{75k}$)는 Nb 함량이 증가할수록 감소하였다. 이와 같은 Nb함량에 따른 전기전도도와 비저항비의 감소는 계면산란의 기여도가 증가하였기 때문이다.

• 마이크로전자및패키징학회지
• /
• 제17권1호
• /
• pp.25-31
• /
• 2010

본 연구에서는 무연 솔더 중 우수한 특성을 보여 실용화된 Sn-3.0Ag-0.5Cu 조성의 솔더를 사용하여 2주 동안의 시효조건에서 W의 함량이 무전해 Ni-W-P 도금층과 솔더와의 계면에서의 IMC 생성에 미치는 영향에 대해서 조사하였다. 도금층내 인의 함량은 8 wt.%로 고정하였고, 텅스텐의 함량은 각각 0, 3, 6 및 9 wt.%로 변화시켰으며, 모든 시료는 $255^{\circ}C$에서 리플로우한 후, $200^{\circ}C$에서 2주 동안 시효처리하였다. 각각의 시료에서 $(Cu,Ni)_6Sn_5$와 $(Ni,Cu)_3Sn_4$의 IMC가 관찰되었으며, 시효처리시간의 증가에 따라 UBM과 무연납의 계면에서 생성된 IMC가 증가함을 보였고, W의 함량이 높을수록 열적 안정성이 증가하여 $Ni(W)_3P$의 생성 속도를 늦춰 그에 따른 영향으로 IMC의 두께가 증가함을 보였다.

• 열처리공학회지
• /
• 제20권6호
• /
• pp.318-322
• /
• 2007

The high electrical conductivity Cu-0.15% Sn alloys containing various P contents, and the high conductivity and high strength Cu-0.1% Sn-0.1%Ag alloys with various Mg/P additions were fabricated and their mechanical properties and electrical conductivity were investigated. The electrical conductivity was generally decreased as the P content was increased where as the hardness and strength was shown to increase. When Mg was added to P-containing Cu alloys, the detrimental effect of P on the conductivity was significantly reduced, and TEM observations indicated that the formation of $Mg_3P_2$ phase is responsible for this result.

• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1245-1252
• /
• 1996

The charcteristics for the copper-contained spinel ferrites such as NiCu-and ZnCu ferrites with various copper content are investigated in this study which can provide a explanation for the behavior of copper in sintering at a low temperatuer. The bulk density and the grain size for these sintered ferrites were increased with the larger amount of copper in compositions. In microstructure of copper-contained spinel ferrites copper exists in the grain boundary which is sintering process. Electrical resistivity and frequency range with maximum Q-facor of NiCu-or ZnCu ferrites were decreased as increasing of copper content in ferrite composition.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.95.1-95.1
• /
• 2017

In this study, it has been tried to make the single Mo-Cu alloying targets with the Cu showing the best surface hardness that was determined by investigation on the coatings with the double target process. The single alloying targets were prepared by powder metallurgy methods such as mechanical alloying and spark plasma sintering. The nanocomposite coatings were prepared by reactive magnetron sputtering process with the single alloying targets in $Ar+N_2$ atmosphere. The microstructure changes of the Mo-Cu-N coatings with diverse Cu contents were investigated by using XRD, SEM and EDS. The mechanical properties of the coatings were evaluated by using nano-indentor, scratch test, and ball on disc methods. Especially, the coated samples were tested by using various lubricating oil to compare the property of anti wear-resistance. In this study, the nano-composite MoN-Cu coatings prepared using an alloying target was eventually compared with the coatings from the multiple targets.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.28-33
• /
• 2014

Recently, the actuator worked by the driving recovery-force of the thermo elastic martensitic transformation of shape memory alloys(SMA) has been studied. This paper presents a study on the fatigue life of shape memory alloy (SMA) actuators undergoing thermally induced martensitic phase transformation under various stress levels. shape memory recoverable stress and strain of Ti-44.5at.%Ni-8at.%Cu alloys were by means of constant temperature tensile tests. Differential scanning calorimetry (DSC) was employed in order to investigate the transformation characteristics of the alloy before the tests. the results were summarized as follows. The martensite inducing stress incerased with the increasing of the Cu-contents. The fatigue life decreased with the increasing of the test load and the Cu-content. The data acquired will be very useful during the design process of an SMA NiTiCu element as a functional part of an actuator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.49-50
• /
• 2006

The studies on Cu CMP have focused on material removal and its mechanisms. Although many studies have been conducted on the mechanism of Cu CMP, a study on uniformity in Cu CMP is still unknown. Since the aim of CMP is global and local planarization, the approach to uniformity in Cu CMP is essential to elucidate the Cu CMP mechanism as well. The main purpose of the experiment reported here was to investigate the roles of slurry components in the formation of the uniformity in Cu CMP. All the results of in this study showed that the uniformity in Cu CMP could be controlled by the contents of slurry components.

• 한국환경농학회지
• /
• 제23권1호
• /
• pp.15-21
• /
• 2004

우리나라 중부지역에서 1998년 $3{\sim}5$월에 과수원 토양 164지점(경기 48, 강원 36, 충북 36, 충남 44지점)을 대상으로 표토($0{\sim}20\;cm$)와 심토($20{\sim}40\;cm$)로 나누어 채취하여 토양내 중금속함량과 분포특성, 총함량에 대한 침출액별 가용성 함량비율 및 토양 이화학성과의 관계를 비교 검토한 결과는 다음과 같다. 과수원 토양중 0.1N-HCl 침출성 평균함량은 Cd 0.080, Cu 4.23, Fb 3.42 mg/ks 1N-HCl 침출성 As 평균함량은 0.44 mg/kg, 중금속 총함량은 Zn 78.9, Ni 16.09 및 Hg 0.052 mg/kg 이었다. 과수원 토양내 중금속 평균함량은 우리나라 토양환경보전법의 토양오염 우려기준(Cd 1.5, Cu 50, Pb 100, Zn 300, Ni 40, Hg 4 mg/kg)과 비교하여 $1/2.5{\sim}1/76.9$ 수준으로 안전하였다. 토양의 중금속 총함량에 대한 침출액별 가용성 함량비율은 Cd $5.4{\sim}9.2$, Cu $27.9{\sim}47.8$, Pb $12.6{\sim}21.8$, Zn $15.8{\sim}20.3$, Ni $5.3{\sim}6.3$, Cr $0.7{\sim}3.6%$ 이었고, 특히 0.05 M-EDTA 침출성 Cu 및 Pb의 침출비율이 상대적으로 높게 나타났다. 토양내 Cd, Pb 및 Ni의 총함량은 모래함량과 부의상관, 미사와 점토함량과는 정의 상관을 보였다. 토양의 중금속 총함량에 대한 침출액별 가용성 함량비율은 점토함량과는 부의 상관을 보였으며, Zn과 Ni의 함량비율은 토양 pH값, 유기물 및 유효인산 함량과 정의 상관을 보였다. 이상의 결과에서 볼 때 과수원 토양의 중금속 함량은 토양환경보전법의 토양오염기준보다 매우 낮아 안전하였으나 영농활동에 의한 영향으로 볼 수 있는 농도수준이 검출된 일부 토양에서 조사되었다. 따라서 최근의 친환경농업 측면으로 볼 때 영농형태별 중금속의 분포 및 농업자재에 의한 농경지내 중금속 부하량에 근거하여 중금속 오염유무를 평가할 수 있는 판단기준에 대한 연구가 필요하다고 생각된다.

• Preventive Nutrition and Food Science
• /
• 제17권4호
• /
• pp.299-305
• /
• 2012

Yam has been recognized having the beneficial effects for the prevention of various diseases, such as cancer, immunity, infection and obesity etc. There is increasing consideration to supplement the antioxidant nutrients to make up the lack of the antioxidant nutrient intakes. No study has been reported for the analysis of antioxidant mineral contents and comparison to dietary recommended intake for the sense of health promotion. In our study, we analyzed the contents of antioxidant trace elements (Zn, Mn, Fe, Cu and Se) and Cr contents in cultivated Korean yam powders for evaluation of nutrient intake aspects. We collected the commercial yam powders from six different cultivated areas in the South Korea and measured antioxidant minerals (Zn, Mn, Fe, Cu and Se) and Cr contents using trace element-free plasma spectrometer (ICP) or atomic absorption spectrometer (AAS) after dry-ashing and then wet-acid digestion. The accuracy of mineral analysis method was confirmed by the mineral analysis of standard reference material. Each analyzed element contents in yam were compared to dietary reference intakes of Koreans (KDRIs). The average levels of trace elements (Zn, Mn, Fe, Cu, Se and Cr) in yam powders were 18.3, 11.9, 36.0, 3.7, 1.9 and 1.27 ${\mu}g/g$ yam powder, respectively. The intakes of Zn, Fe, Cu and Se of which KDRIs is determined, are accounted as being up to 23.8%, 55.6%, 32.5% and 236% recommended intake (RI) of KDRIs, if daily yam supplementation (50 g) of commercial instruction would be considered. The intake of Mn is about 25% adequate intake (AI) of KDRIs with the daily supplementation of yam powder. Most of mineral intakes from daily yam supplementation were with the range of non-detectable to <10% upper limit (UL) level, which is very much safe. The study results show that daily supplementation of Korean yam power is beneficial to provide the supplemental nutrient intake and also is safe, if the suggested dosage would be considered.