• Animal Bioscience
• /
• v.36 no.3
• /
• pp.498-505
• /
• 2023

Objective: This study was conducted to determine the optimal dose of novel iron amino acid complexes (Fe-Lys-Glu) by measuring laying performance, egg quality, egg iron (Fe) concentrations, and blood biochemical parameters in laying hens. Methods: A total of 1,260 18-week-old healthy Beijing White laying hens were randomly divided into 7 groups with 12 replicates of 15 birds each. After a 2-wk acclimation to the basal diet, hens were fed diets supplemented with 0 (negative control, the analyzed innate iron content was 75.06 mg/kg), 15, 30, 45, 60, and 75 mg Fe/kg as Fe-Lys-Glu or 45 mg Fe/kg from FeSO₄ (positive control) for 24 wk. Results: Results showed that compared with the negative and positive control groups, dietary supplementation with 30 to 75 mg Fe/kg from Fe-Lys-Glu significantly (linear and quadratic, p<0.05) increased the laying rate (LR) and average daily egg weight (ADEW); hens administered 45 to 75 mg Fe/kg as Fe-Lys-Glu showed a remarkable (linear, p<0.05) decrease in feed conversion ratio. There were no significant differences among all groups in egg quality. The iron concentrations in egg yolk and serum were elevated by increasing Fe-Lys-Glu levels, and the highest iron content was found in 75 mg Fe/kg group. In addition, hens fed 45 mg Fe/kg from Fe-Lys-Glu had (linear and quadratic, p<0.05) higher yolk Fe contents than that with the same dosage of FeSO₄ supplementation. The red blood cell (RBC) count and hemoglobin content (linear and quadratic, p<0.05) increased obviously in the groups fed with 30 to 75 mg Fe/kg as Fe-Lys-Glu in comparison with the control group. Fe-Lys-Glu supplementation also (linear and quadratic, p<0.05) enhanced the activity of copper/zinc-superoxide dismutase (Cu/Zn-SOD) in serum, as a result, the serum malonaldehyde content (linear and quadratic, p<0.05) decreased in hens received 60 to 75 mg Fe/kg as Fe-Lys-Glu. Conclusion: Supplementation Fe-Lys-Glu in laying hens could substitute for FeSO₄ and the optimal additive levels of Fe-Lys-Glu are 45 mg Fe/kg in layers diets based on the quadratic regression analysis of LR, ADEW, RBC, and Cu/Zn-SOD.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.4
• /
• pp.160-165
• /
• 2001

The eletrochemical charateristics of mercapto compound additives on the copper electroplating for semi conductor metalization were investigated. Mercapto compounds including sulfur atom is known that they activate deposition rate in eletroplating. Four different types of mercapto compounds were chosen with different concentration and both the characteristics of plating and throwing power were investigated by electrochemical experiments such as Hull cell test, Haring-Blum cell, cathodic polarization, EQCM(Electrochemical Quartz Crystal Microbalance). 3-Mercapto-1-propanesulfonic acid among 4 different mercapto compounds was regarded as the most proper activator with the results of the mass change of Cu metal deposited on eletrode by cathodic polarization and EQCM. The overpotential was more shifted to 100 mV in the concentration of 20 ppm than the solution with only $Cl^-$ in cathodic scan.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.9
• /
• pp.1260-1268
• /
• 2014

Screening of a gene library from Paenibacillus sp. PBS-2 generated in Escherichia coli led to the identification of a clone with lipolytic activity. Sequence analysis showed an open reading frame encoding a polypeptide of 378 amino acid residues with a predicted molecular mass of 42 kDa. The esterase displayed 69% and 42% identity with the putative ${\beta}$-lactamases from Paenibacillus sp. JDR-2 and Clostridium sp. BNL1100, respectively. The esterase contained a Ser-x-x-Lys motif that is conserved among all ${\beta}$-lactamases found to date. The protein PBS-2 was produced in both soluble and insoluble forms when E. coli cells harboring the gene were cultured at $18^{\circ}C$. The enzyme is a serine protein and was active against p-nitrophenyl esters of $C_2$, $C_4$, $C_8$, and $C_{10}$. The optimum pH and temperature for enzyme activity were pH 9.0 and $30^{\circ}C$, respectively. Relative activity of 55% remained at up to $5^{\circ}C$ with an activation energy of 5.84 kcal/mol, which indicates that the enzyme is cold-adapted. Enzyme activity was inhibited by $Cd^{2+}$, $Cu^{2+}$, and $Hg^{2+}$ ions. As expected for a serine esterase, activity was inhibited by phenylmethylsulfonyl fluoride. The enzyme was remarkably active and stable in the presence of commercial detergents and organic solvents. This cold-adapted esterase has potential as a biocatalyst and detergent additive for use at low temperatures.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.1
• /
• pp.32-36
• /
• 2001

This study was conducted to estimate the contents of trace metals in vegetable which were produced in Korea. The levels of trace metals determined using a mercury analyzer, and ICP (inductively coupled plasma spectrometer) and an AAS (atomic absorption spectrophotometer) after wet digestion. The values of trace metals [minimum~maximum (mean), mg/kg] in vegetables were a follows ; Hg : 0.0001~0.019 (0.002), Pb : 0.001~0.28 (0.02), Cd : 0.001~0.078 (0.016), As : 0.001~0.06 (0.02), Cu : 0.06~24.81 (0.77), Mn : 0.17~15.12 (2.32), Zn : 0.13~28.70 (2.51). These results showed that metal contents in vegetables on domestic markets were similar to those reported in other countries. The weekly average intakes of lead, cadmium and mercury from vegetables take 2~7% of PTWI (Provisional Tolerable Weekly Intakes) that the FAO/WHO Joint Food Additive and Contaminants Committee had set to evaluate their safeties.

• Journal of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.216-223
• /
• 1986

Separation of optical isomers of DNS derivatized amino acids by a reversed-phase high-performance liquid chromatography has been studied by adding a complex of an optically active amino acid (L-arginine) with the metal ion (Cu(II), Zn(II), Cd(II), Ni(II)) to the mobile phase. The separations are affected by the concentrations of acetonitrile, chelate and buffer. They are also affected by the pH and the kinds of metal and buffer. A separation mechanism, which is based on steric effect of the ligand exchange reaction for the formation of ternary complexes by the D,L-DNS-amino acids and the chiral additive associated with the stationary phase, is proposed to interpret the elution behaviors of D, L-dansyl-amino acids.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.139-139
• /
• 2016

반도체 다마신배선용 도금용 구리도금첨가제는 대표적으로 accelerator, suppressor 및 leveler 첨가제를 사용하여 다마신 패턴을 채우고 평탄화를 시킬 수 있다. Si 반도체 공정기술에 기반한 정확한 구조분석을 통해 각각의 첨가제의 기능이 비교적 체계적으로 연구되었으며, 최근에는 유속영향을 많이 받는 것으로 알려진 leveler 첨가제에 대한 연구가 활발히 진행되고 있다. 본 연구는 대표적 leveler 첨가제의 하나인 Janus Green B(JGB, $C_{30}H_{31}ClN_6$)를 0 ~ 1 mM을 첨가하여 Si 기판위에 증착된 Cu 씨드층 상의 도금후 표면상태 및 불순물의 농도를 분석하고, 이 박막층들의 결정립 성장 경향성을 electron backscattered diffraction(EBSD) 분석을 통해 진행하였다. C, H, N 등의 불순물이 JGB 농도와 선형적 관계를 가지고 증가하는 것을 알 수 있었으며, S와 O의 불순물도 JGB 농도 증가에 따라 증가하는 것을 알 수 있었다. 또한 0.1 mM 첨가한 경우에 60% 정도 결정립 성장이 진행된 것을 알 수 있었으며, 0.2 mM을 넣은 경우에는 결정립 성장이 일어나지 않은 것을 알 수 있었다. 흥미로운 점은 4 point probe를 통한 면저항 측정을 통해 EBSD를 통한 결정립성장이 관찰되지 않은 0.2 mM JGB를 첨가한 경우에 대해서도 면저항의 감소가 관찰되며, 오히려 JGB 농도가 높을수록 이러한 면저항의 감소가 빠르게 시작되는 것을 관찰할 수 있었다. 이는 JGB 농도 증가에 따라 박막층의 불순물의 농도가 증가하고 막내에 존재하는 불순물의 농도가 증가하면 내부응력장이 커짐으로 인해 더욱 빠른 속도로 불순물의 재배치가 일어난 것으로 보인다. 이러한 불순물이 결정립계면에 편석되는 경우에 pinning을 통해 결정립계면의 이동을 저하시킬 수 있으므로 결정립의 성장 억제가 가능해진 것으로 판단된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.126-130
• /
• 2008

In this study, in order to develop low loss multilayer piezoelectric actuator, PZN-PZT ceramics were fabricated using $Li_2CO_3,\;Bi_2O_3$, CuO and ZnO as sintering aids, their structural, piezoelectric and dielectric characteristics were investigated according to the amount of ZnO addition, At the sintering temperature of $870^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}_r$) and piezoelectric constant($d_{33}$) of 0.4 wt% ZnO added specimen (sintered at $870^{\circ}C$) showed the optimum value of $7.812g/cm^3$, 0.535, 916, 1399, 335 pC/N respectively. Taking into consideration above piezoelectric properties of the specimen sintered at low temperature, it was concluded that PZN-PZT ceramics using 0.4 wt% ZnO as additive showed the optimum characteristics as the composition ceramics for low loss multilayer piezoelectric actuator application.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.475-480
• /
• 2021

Interest in edible insects such as Protaetia brevitarsis has increased rapidly, and several insect producers use these insects in industrialized mass production. However, mass rearing of insects can cause insect diseases. Sprouted barley is a valuable source of nutrients and has antioxidant, antimicrobial, anti-inflammatory, and anti-cancer effects. This study was conducted to investigate the effect of sprouted barley as a feed additive for producing healthy P. brevitarsis larvae. P. brevitarsis larvae were fed feeds with or without sprouted barley, and their body weight and larval period wewe checked weekly. To confirm the antibacterial effects of sprouted barley, in vitro bioassays were performed by counting Serratia marcescens colonies, and in vivo bioassays were performed by determining the survival rate and body weights of the S. marcescens-infected larvae. Larvae fed different feeds were analyzed for their nutrient compositions (i.e., such as proximate composition, minerals, amino acids, and heavy metals). Larvae fed 5% and 10% sprouted barley had maximum weight increases of 19.2% and 23.1%, respectively. Both treatment groups had significantly shorter larval periods than those of the control group. Sprouted barley markedly inhibited the growth of entomopathogenic S. marcescens. Furthermore, larvae fed sprouted barley exhibited higher Cu, Zn, and K levels. Seventeen amino acids were present in larvae fed sprouted barley, of which, tyrosine and glutamic acid were predominant. No heavy metals were detected in any of the investigated groups. Therefore, sprouted barley may be a suitable feed additive for producing high-quality P. brevitarsis larvae.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.1
• /
• pp.113-131
• /
• 1997

This study was performed to evaluate the exposure levels of worker exposed to welding fume and metals in confined spaces of a shipyard. The airborne concentration of welding fumes and metal elements in confined spaces were compared with those in open working areas. Results of the study were as follows. 1. The geometric mean of welding fume concentration in a confined space was $16.6mg/m^3$, which contained $3.9mg/m^3$ Fe, $1.2mg/m^3$ Mg, $0.8mg/m^3$ Zn, $0.008mg/m^3$ Cu, $0.008mg/m^3$ Pb, $0.005mg/m^3$ Ni, $0.003mg/m^3$ Cr, $0.003mg/m^3$ Cd. The geometric mean of welding fume concentration in open working areas was $5.2mg/m^3$, which contained $1.1mg/m^3$ Fe, $0.3mg/m^3$ Mg, $0.3mg/m^3$ Zn, $0.004mg/m^3$ Cu, $0.008mg/m^3$ Pb, $0.005mg/m^3$ Ni, $0.003mg/m^3$ Cr, $0.0003mg/m^3$ Cd. The geometric mean of welding fume concentration in confined spaces was 3,2 times higher than that in open working areas. The geometric mean concentrations of such metals as Fe, Mg, Zn, or Cu within fume in confined spaces were 2-4 times higher than those in open working areas, while little difference made such metals as Pb, Ni, Cr, Cd. 2. In 32 samples out of a total of 39 samples (82.1%) collected in confined spaces, the concentrations of welding fume exceeded TLV. while so did 19 samples out of 33 samples (57.6%) in open working areas. As for the concentrations of metals in welding flume from confined spaces, Fe exceeded TLV in 14 out of a total of 38 samples (36.8%), Mn exceeded TLV in 23 out of a total of 38 samples (60.5%). As for the concentration of metals in welding fume from open working areas, Fe exceeded TLV in 3 out of a total of 34 samples (8.8%), Mn exceeded TLV in 6 out of a total of 34 samples (17.6%). Considering additive effect among metals, in 31 out of a total of 39 samples (79.5%) collected in confined spaces, the concentrations of welding fume exceeded TLV, while so did 14 out of 38 samples (55.6%) in open working areas. 3. In respect of base metal and welding type the concentration of total welding fume by $CO_2$ gas W./mild steel was the highest, followed by semiauto MMA/mild steel, then followed by TIG or $CO_2$ gas W./stainless steel. ; as for concentration of metal within fume, a decreasing order was Fe, Zn, Mn, and Pb in $CO_2$ gas W./mild steel and semiauto MMA/mild steel, but Fe, Mn, Cr, and Ni in TIG or $CO_2$ gas W./stainless steel. 4. In case of welding base metal covered by paint, contents of Zn within red paint chip and within gray paint chip were 14.0% and 0.08% respectively, which showed a little difference, while the airborne concentrations of Zn within fume during welding base metal covered red paint and gray paint were $1.351mg/m^3$ and $1.018mg/m^3$ respectively, which showed little difference. As for Pb, contents of red paint chip and gray paint chip were 0.14% and 0.08% respectively, and the airborne concentrations within fume during welding base metal covered red paint and gray paint were $0.009mg/m^3$ and $0.007mg/m^3$ respectively, both of which showed little difference.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.79-93
• /
• 1991

With the advent of ULSI, many problems in previous metallization techniques and interconnection materials have become more serious. In this work, selective deposition of copper to fill the submicron contact has been tried. After forming electro-deposited copper films on p-type (100) silicon wafer using 0.75M $CuSO_4{\cdot}$5H_2O$ as an electrolyte, the effect of deposition time, current density and concentration of an additive on film properties were investigated. Film thickness, particle size and resistivity were analyzed by Alpha Step, SEM and 4 - point probe measurement respectively. The deposition rate was about $0.5-0.6\mu\textrm{m}$/min at $2A/dm^2$ and the particle size increased with increasing current density. The resistivities of electro-deposited copper films were about $3-6{\mu}{\Omega}{\cdot}$cm for the particle size above $4000{\AA}$. By the addition of 0.2 g/l gelatin, the particle size was reduced to less than $0.1{\mu}m $ and selective plugging of copper on submicron contacts could be successfully achieved.