• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.767-773
• /
• 2019

The thermal diffusion performance of the electronic device is a factor for evaluating the stability of the electronic device. Therefore, many of research have been conducted to improve the thermal characteristics of thermal interface materials, which are materials for thermal diffusion of electronic products. In this study, nano thermal grease was prepared by blending graphene, silver and copper nano powders into a thermal grease, a type of thermal interface materials, and the heat transfer rate was measured and compared for the purpose of investigating the improved thermal properties. As a result, the thermal properties were good in the order of graphene, silver and copper, which is thought to be due to the different thermal properties of the nano powder itself.

• 대한화학회지
• /
• 제53권4호
• /
• pp.407-414
• /
• 2009

o-phenylenediamine, 3-acetyl-6-methyl-(2H) pyran, 2,4 (3H)-dione (dehydroacetic acid or DHA) 및 살리실 알데히드로부터 유도한 4-hydroxy-3-(1-{2-(2-hydroxy-benzylidene)-amino phenylimino}-ethyl)-6- methy-pyran-2-one (H2L) 의 Cu(II), Ni(II), Co(II), Mn(II) 및 Fe(III) 고체 착물을 합성한 후, 원소분석, 전도 도법, 수자율, 자외선-가시선, 적외선, $^1H$-NMR 스펙트라, X-선 회절, 열분석을 통해 특성을 규명하고 항균 활성을 조사하였다. IR 스펙트럼 데이터로부터 이 리간드가 중심 금속이온에 대해 ONNO 주개원자 배열을 갖는 이염기성 네자리 리간드로 행동함을 제안하였다. 원소분석 데이터로부터 이들 착물의 화학량론이 1:1 (금속:리간드)임을 알았다. 물리-화학적 데이타로부터 Cu(II) 및 Ni(II) 착물이 사각평면 기 하구조, 그리고 Co(II), Mn(II) 및 Fe(III) 착물이 팔면체 기하구조임을 제안하였다. X-선 회절 데이터로 부터 Cu(II) 착물이 사방정계(orthorhombic) 결정계, Ni(II), Co(II) 및 Fe(III) 착물이 단사계(monoclinic) 결정계 그리고 Mn(II) 착물이 정방정계(tetragonal) 결정계임을 제안하였다. 착물의 열적 행동(TG/DTA) 을 연구하였으며 Coats-Redfern 방법으로 반응속도 파라메터를 결정하였다. 리간드와 이들 금속 착물을 이용하여 Staphylococcus aureus 및 Escherichia coli에 대한 향균 활성과 Aspergillus Niger 및 Trichoderma 에 대한 살균 활성을 조사하였다.

• Korean Chemical Engineering Research
• /
• 제52권2호
• /
• pp.247-255
• /
• 2014

전극 촉매 물질인 페롭스카이트 형 $La_{0.8}Sr_{0.2}CuO_3$ 분말을 시트릭산 합성법으로 제조하였다. 이렇게 제조한 $La_{0.8}Sr_{0.2}CuO_3$ 분말과 지지전도체로 탄소 및 소수성 결합제로 polytetrafluoroethylene(PTFE)를 혼합하여 다공성 전극을 제조하였다. 이산화탄소를 0.1, 0.5, 1.0M KOH 전해액에 용해하여 5, $10^{\circ}C$의 반응온도에서 -1.5~-2.5 V(vs. Ag/AgCl)의 인가전위로 전기화학 실험을 수행한 결과, 액상생성물은 온도와 상관없이 메탄올, 에탄올, 2-프로판올, 1,2-부탄올이 얻어진 반면 기상생성물로는 $5^{\circ}C$에서는 메탄, 에탄, 에틸렌이 $10^{\circ}C$에서는 메탄, 에탄, 프로판이 생성되었다. 전체 패러데이 효율의 관점에서 $CO_2$ 환원의 최적 인가전압은 기상의 경우 높은 값을(-2.0, -2.2 V) 보였고, 액상의 경우는 전해액 농도와 반응온도에 상관없이 낮은 전압(-1.5 V)임을 알 수 있었다.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.108-113
• /
• 2013

$CuInSe_2$(CIS) chalcopyrite 물질은 고효율 박막 태양전지를 위한 광흡수층의 물질로 매우 잘 알려져 있다. 최근 태양광 산업의 흐름은 안정적인 재료 개발과 가격 경쟁력 있는 태양전지를 위한 효율적인 제조 공정을 일치시키는 것이다. 저가의 CIS 광흡수층 위해 다양한 방법으로 제조를 시도하였고, 본 논문에서는 CIS 광흡수층을 저가형으로 제조를 위해 상용화되는 6 mm pieces를 사용하여 high frequency ball milling과 cryogenic milling을 이용해 CIS 나노입자를 얻었다. 그리고, CIS 광흡수층은 불활성 분위기의 glove box 안에서 milling된 나노입자를 사용하여 paste coating법으로 제조하였다. Chalcopyrite CIS 박막은 기판온도 550도에서 30분간 셀렌화 한 후 성공적으로 제조되었으며, Al/ZnO/CdS/CIS/Mo 구조의 CIS 태양전지는 evaporation, sputtering 및 chemical bath deposition(CBD) 등 다양한 증착 방법으로 각각 제조하였다. 결론적으로, 나노입자를 이용한 CIS 태양전지 전기적 변환효율은 1.74 %를 얻었으며, 개방전압(Voc)는 29 mV, 합선전류밀도(Jsc)는 35 $mA/cm^2$, 그리고 충진율(FF)은 17.2 %였다. 나노입자 CIS 광흡수층은 energy dispersive spectroscopy(EDS), x-ray diffraction(XRD) 그리고 high-resolution scanning electron microscopy(HRSEM) 등으로 특성 분석을 하였다.

• Journal of Preventive Medicine and Public Health
• /
• 제31권4호
• /
• pp.666-679
• /
• 1998

This study aims at providing the fundamental data on the field of cosmetics by comparing heavy metal concentration in terms of domestic/foreign products, items, companies and colors. This study has determined the concentration of chromium, lead, mangagnese, nickel, copper and vanadium in cosmetics such as moisturizer, concealer, foundation (Ivory-yellow), compact powder (Ivory-yellow), lip colo. (Red, brown), eye shadow (Red, brwon and dark green) and eye liner (Black) manufactured by five domestic cosmetic companies and five foreign cosmetic companies on the market. The samples have been collected in cosmetic stores in Pusan from Dec. lst 1996 to Jan. 3lst 1997. The results are as follows : 1. The heavy metal concentration in cosmetics was $2.420{\mu}g/g$ for chromium, $0.82{\mu}g/g$ for lead, $4.49{\mu}g/g$ for manganese, $1.69{\mu}g/g$for nickel, $0.53{\mu}g/g$ for copper, and $51{\mu}g/g$ for vanadium, respectively. 2. Lead and vanadium concentration were significantly higher in domestic cosmetics than foreign cosmetics(p<0.05). 3. The mean(GM) concentrations of heavy metal were different significantly (p<0.01) when classified with cosmetic items. The highest means shown at eye shadow in $Cr(14.96{\mu}g/g),\;Cu(1.32{\mu}g/g),\;V(1.28{\mu}g/g),\;and\;Ni(8.30{\mu}g/g)$, compact powder in $Pb(2.50{\mu}g/g)$, eye liner in $Mn(90.62{\mu}g/g)$. 4. The mean(GM) concentrations of heavy metal were different significantly (p<0.01) among colored cosmetics. The highest mean concentration of Cr, Ni, Cu and V were dark green-colored cosmetics, that of Mn was black-colored cosmetics, and that of Pb was ivory yellow- colored cosmetics.

• 대한가정학회지
• /
• 제38권9호
• /
• pp.119-130
• /
• 2000

The purpose of this study was to confirm the possibility of screen printing with Natural dyes. The coloring matter such as sappan wood was used in order to obtain the colorant powder through the processes of extraction, low pressure concentration and the spray dry. After the screen printing on silk and cotton fabrics with colorant, K/S value changes of color and color fastness were measured. The main resets were as follows : 1. The viscosity of printing thickeners of sappan wood powder was about 15,200 cps, and the highest K/S value of the fabrics printed with sappan wood was obtained at 90$\pm$2$\^{C}$ of steaming temperature and 80 minutes of steaming time. 2. For the fabrics printed with sampan wood, adding of urea was not effective, since the more the concentration of urea increased, the more K/S values decreased. 3. For the natural dyes printing, the more the concentration of colorants increased, the more K/S values increased. In general, the K/S values of the printed fabrics were higher when treated with mordants rather than without mordants. Specifically, the λmax sappan wood was 520∼570 nm, and the K/S value was highest when treated with Cu mordant and lowest when treated with Sn. 4. Generally, the color fastness was relatively fair.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.285-291
• /
• 2006

Copper powders have been widely used in electrically conductive coatings, electrode materials et al. and are very prospective since they are cheaper than noble metal powders such as silver or palladium. In this study, copper powders for metal filler of EMI shielding have been prepared using a solvothermal process from $CuSO_4$, NaOH, Glucose, mixed solvent ($H_2O$: Ethanol) and hydrazine which was used as a reducing agent at various reaction conditions. The prepared copper powders showed finely dispersed spherical shape without agglomerate, uniform morphology, narrow size distribution, high purity and were about 400-700 nm in size. The prepared powders were characterized using XRD, SEM, TGA, XPS, particle size measurement and EMI shielding efficiency.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.11-11
• /
• 2000

Large-size ceramic/metal bulk FGMs have been fabricated on a recently developed and the world's largest Spark Plasma Sintering(SPS) systems, As a part of the development program for practical production processes and machines for FGMs by SPS, the processes, mechanical properties, dimensional size and shape effects, and production machine systems were investigated. In the past, $ZrO_{2}$/TiAI, $ZrO_{2}$/Ni, $Al_{2}O_{3}$/Ti, WC/Co, WC/Co/Steel, A1/P, Polymide, Cu/Polymide, nano-composites, porous and other combinations of bulk FGMs have already been processed using SPS. However, most of the specimen sizes were small, in a range of 20 to 30mm in diameter. Recently disk-shape sintered compacts with diameters of 100 and 150 mm, and thickness of approximately 15 and 17 mm, $ZrO_{2}$(3Y)/ stainless steel FGMs were homogenous consolidated in a shorter sintering time, while maintaining high quality and repeatability by utilizing a temperature gradient sintering method. The SPS heating up and holding time totaled less than one hour. Therefore, the SPS process in expected to find increased use in the fabrication of large-size FGMs as a new industrial processing technology. This paper introduces SPS systems, the processing principles, features and the characteristies of ceramic/metal bulk FGM.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.432-437
• /
• 2015

The en-riched $^{58}Ni$ powders are dissolved in acid solution and coated on a Cu target for proton irradiation at cyclotron to produce $^{57}Co$ radioisotope. The condition of the plating bath and the coating process are determined using the en-riched powders. To establish the coating conditions for $^{57}Co$, non-radioactive Co ions are dissolved in an acid solution and electroplated on to a rhodium plate. The thermal diffusion of electroplated Co into a rhodium matrix was studied to apply a $^{57}Co$ Mssbauer source. The diffusion depth from surface to matrix of Co is depended on the annealing temperature and time. The deposited Co atoms diffuse completely into a rhodium (Rh) matrix without substantial loss at an annealing temperature of 1200 for 4 hours.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1179-1180
• /
• 2006

Y-type barium ferrite ($Ba_2Me_2Fe_{12}O_{22};$ Me=Zn, Co, Cu) expected as an electromagnetic wave absorber were prepared by the glass-ceramic method. The glasses with composition of $0.1ZnO{\cdot}0.9(xB_2O_3{\cdot}yBaO{\cdot}(1-x-y)Fe_2O_3)$ were prepared. Single-phase powders of Y type barium ferrite were obtained with the composition $0.1ZnO{\cdot}0.9(0.2B_2O_3{\cdot}0.5BaO{\cdot}0.3Fe_2O_3)$. The shape of Y-type crystals depended strongly on the heating temperature and changed from a plate-like hexagon to a complex polyhedron with increasing heating temperature. Correlation was recognized between saturation magnetization and crystal shape. Electromagnetic wave absorption characteristics was affected by the saturation magnetization and crystal shape.