• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.178-183
• /
• 2012

Two $RuSr_2(EuCe)Cu_2O_z$ samples (as prepared and after $N_2$ treatment) have been investigated by thermogravimetric (TC) analysis, high-resolution x-ray powder diffraction and magnetization measurements. TG measurements which were carried out in $H_2/Ar$ atmosphere showed that the $N_2$ treatment of the as-prepared sample at $650^{\circ}C$ for 2h leads to a decrease in the oxygen content z by about 0.25. This oxygen depletion was accompanied by an increase in the magnetic transition temperature from 54.0 K to 114.9 K. This magnetic behavior is discussed in connection with the results of Rietveld analysis of the x-ray diffraction data which showed that the $N_2$ treatment resulted in both a significant increase in the rotation angle of the $RuO_6$ octahedra and a decrease in c-lattice parameter of the sample.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.3
• /
• pp.1-4
• /
• 2018

The effect of sulfate substitution on the formation of (Pb,S)-1201 type phase was investigated. Polycrystalline samples with nominal compositions of $(Pb_{0.5}B_{0.5-x}S_x)(Sr_{2-y}La_y)CuO_z$, (x = 0 - 0.5, y = 0.7 - 1.0) and $(Pb_{0.5}S_{0.5})(Sr_{2-y}La_y)CuO_z$ (y = 0.5 - 1.0) were prepared by using a solid-state reaction method. The samples were characterized by powder X-ray diffraction (XRD) and resistivity measurements. XRD data revealed that almost-single (Pb,S)-1201 phase samples could be obtained for x = 0.5 and y = 0.9-1.0, judging from the similar results of the XRD patterns between the (Pb,S)-1201 and (Pb,B)-1201 phases. Each of the samples has a crystal structure with tetragonal symmetry. The sample with x = 0.5 and y = 0.9 is found to show an onset of resistivity dropping at over 23 K and zero resistivity at 12 K.

• Journal of Korea Foundry Society
• /
• v.31 no.3
• /
• pp.145-151
• /
• 2011

Metallic foam has been known as a functional material which can be used for absorption properties of energy and sound. The unique characteristics of Al foam of mechanical, acoustic, thermal properties depend on density, cell size distribution and cell size, and these characteristics expected to apply industry field. Al-Zn-Mg-Cu alloy foams was fabricated by following process; firstly melting the Al alloy, thickening process of addition of Ca granule to increased of viscosity, foaming process of addition of titanium hydride powder to make the pores, holding in the furnace to form of cooling down to the room temperature. Metal foams with various porosity level were manufactured by change the foaming temperature. Compressive strength of the Al alloy foams was 2 times higher at 88% porosity and 1.2 times higher at 92% porosity than pure Al foams. It's sound and vibration absorption coefficient were higher than pure Al foams and with increasing porosity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.264-270
• /
• 2011

This paper focuses on possibility to design and fabrication new combination of bullet core to substitute current toxic material of heavy metal such as lead by environment-friendly ones. The core is designed as dual structure to manipulate the core center of gravity easily by combining materials, which of basis is tungsten of low cost and easily acquired. Those combinations are W-M series such as W-Cu, W-Sn, W-Cu-Sn, and W-Cu-Ni to target the density of lead, $11.34g/cm^3$ through powder-metallurgy. Out of four, combination of W-Cu-Ni shows the highest compression density of 96% and is confirmed as the most suitable substitution for lead due to the excellent property of matter and sintering. All combination samples is simulated on the PRODAS software for designing and structure analysis by adjusting the center of gravity of dual core samples forward and backward. The simulations confirm the similarity of current bullet core with respect to properties of mass, aero dynamics, and flying stability.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1119-1123
• /
• 2002

Nanostructured spinel NiZn ferrites were prepared by the sol-gel method from metal nitrate raw materials. Analyses by X-ray diffraction and scanning electron microscopy showed the average particle size of NiZn ferrite was under 50 nm. The single phase of NiZn ferrites was obtained by firing at 250${\circ}C$, resulting in nanoparticles exhibiting normal ferrimagnetic behavior. The nanostructured $Ni_{1-X}Zn_XFe_2O_4$ (x=0.0∼1.0) were found to have the cubic spinel structure of which the lattice constants ${\alpha}_2$ increases linearly from 8.339 to 8.427 ${\AA}$ with increasing Zn content x, following Vegard's law, approximately. The saturation magnetization $M_s$ was 48 emu/g for x=0.4 and decreased to 8.0 emu/g for higher Zn contents suggesting the typical ferrimagnetism in mixed spinel ferrites. Pure NiZn ferrite phase substituted by Cu was observed before using the additive but hematite phase was partially appeared at $Ni_{0.2}Zn_{0.2}Cu_{0.6}Fe_2O_4$. On the other hand, the hematite phase in this NiZn Cu ferrite was disappeared after using the additive of acethyl aceton with small amount. The saturation magnetization Ms of $Ni_{0.2}Zn_{0.8-y}Cu_yFe_2O_4$(y=0.2∼0.6) as measured was about 51 emu/g at 77K and 19 emu/g at room temperature, respectively.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.628-631
• /
• 1994

We have studied the paramagnetic $CuF_2$ using the techniques of pulsed nuclear magnetic resonance (NMR). The powder sample revealed two well-separated lines from the distinct $^{19}F$ sites at room temperature. One of the lines showed little frequency shift. However, the other showed a large frequency shift, suggesting electron transfers. Furthermore, the two sites have very short spin-lattice relaxation times $(T_1).$ The frequency-shifted site has the shorter $T_1$ than the unshifted one, reflecting the difference of the electron environments of the two sites.

• Journal of Magnetics
• /
• v.14 no.2
• /
• pp.71-74
• /
• 2009

The magnetic and structural properties of FINEMET (the Hitachi product name of the Fe-Si-B-Nb-Cu alloy) nanopowder with a composition of $Fe_{73.5}Si_{13.5}B_9Nb_3Cu_1$ atomic percent were investigated after annealing, chemical etching, and mechanical milling. The primary and secondary crystallization temperatures were 523 and $550^{\circ}C$, respectively. The grain size of the particles was adjusted by annealing time. Optimally annealed particles exhibited a homogenous microstructure composed of nanometer-sized crystalline grains. The grain boundary of the annealed particles was etched preferentially by chemical etching. Chemically etched particles were broken at the grain boundary by high-energy ball milling. As a result, a nanometer-sized FINEMET powder with a uniform size of crystalline grains was fabricated.

• Journal of Surface Science and Engineering
• /
• v.46 no.1
• /
• pp.22-28
• /
• 2013

$WS_2$ particles were added to micro-diamond blades with Cu/Sn binding metal as lubricants to improve cutting efficiency. It was found in previous works that the added $WS_2$ lubricant could reduce remarkably the momentary energy consumption during dicing tests but increased wear rate slightly owing to weak bonding between lubricant particles and bond metals. In the present work, the surface of $WS_2$ lubricant particles were etched for activating the surface of $WS_2$ particles that provide even distribution of particles during powder mixing process and improvement of wetting at the interfaces between $WS_2$ particles and molten Cu/Sn bond metals during pressurized sintering so that could provide the improved strength of micro-blades and result in extended life. Chipping behavior of workpiece with the types of micro-blades including $WS_2$ were compared because it is important in semiconductor and micro-packaging industries to control average roughness and straightness of sliced surface which is closely related with quality.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.803-805
• /
• 2009

Improvement of the color rendering index (CRI) and luminance of a white alternate current powder electroluminescent (ACPEL) device has been attempted using ZnS:Cu,Cl, $Tb_3Al_5O_{12}$:Ce (TAG:Ce), and CaS:Eu phosphors with a layered structure. The device with TAG:Ce and ZnS:Cu,Cl phosphors showed a CRI of 75, with a luminance increase of about 30% depending on the thickness of the TAG:Ce. Further CRI improvement was attempted using CaS:Eu. When they were separately screen-printed, the CRI was increased up to 89 with no decrease in luminance.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1021-1025
• /
• 2009

A novel supramolecular network containing binuclear copper unit $[Cu(phen)_{2}({\mu}-ID\;A)Cu(phen){\cdot}(NO_{3})](NO_{3}){\cdot}4(H_{2}O)$ (1) was synthesized through the self-assembly of iminodiacetic acid ($H_2IDA$) and 1,10-phenanthroline (phen) in the condition of pH = 6. It has been characterized by the infrared (IR) spectroscopy, elemental analysis, single crystal X-ray diffraction, and thermogravimetric analysis (TGA). 1 shows a 2-D supramolecular structure assembled through strong and unique $\pi-\pi$ packing interactions. Density functional theory (DFT) calculations show that theoretical optimized structures can well reproduce the experimental structure. The TGA and powder X-ray diffraction (PXRD) curves indicate that the complex 1 can maintain the structural integrity even at the loss of free water molecules. The magnetic property is also reported in this paper.