• 한국초전도ㆍ저온공학회논문지
• /
• 제17권4호
• /
• pp.25-29
• /
• 2015

In 1987, M. K. Wu and Paul Chu discovered $Y_{1.2}Ba_{0.8}CuO_4$ (YBCO) with critical temperature ($T_c$) of 93 K. It has significantly lowered the cost of cooling of a material up to the point where superconductivity set in. Utilizing the cost reduction of attaining superconductivity and the vast amount of research to understand characteristics of high temperature oxide superconducting materials, there has been effort to use a high temperature superconductor as a coated conductor. It is important to characterize the materials precisely for stable performance before commercializing. We used polarized Raman scattering spectroscopy to study structural and stoichiometric information regarding $YBa_2Cu_3O_{7-x}$, $GdYBa_2Cu_3O_{7-x}$, and $GdBa_2Cu_3O_{7-x}$ produced by three leading groups of producing commercial grade high temperature superconductor coated conductors American Superconductor Corporation, Superpower, and SuNAM.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.188-188
• /
• 2011

Recently, scaling down of ULSI (Ultra Large Scale Integration) circuit of CMOS (Complementary Meta Oxide Semiconductor) based electronic devices, the electronic devices, become much faster and smaller size that are promising property of semiconductor market. However, very narrow interconnect line width has some disadvantages. Deposition of conformal and thin barrier is not easy. And metallization process needs deposition of diffusion barrier and glue layer for EP/ELP deposition. Thus, there is not enough space for copper filling process. In order to get over these negative effects, simple process of copper metallization is important. In this study, Cu-V alloy layer was deposited using of DC/RF magnetron sputter deposition system. Cu-V alloy film was deposited on the plane SiO2/Si bi-layer substrate with smooth surface. Cu-V film's thickness was about 50 nm. Cu-V alloy film deposited at $150^{\circ}C$. XRD, AFM, Hall measurement system, and AES were used to analyze this work. For the barrier formation, annealing temperature was 300, 400, $500^{\circ}C$ (1 hour). Barrier thermal stability was tested by I-V(leakage current) and XRD analysis after 300, 500, $700^{\circ}C$ (12 hour) annealing. With this research, over $500^{\circ}C$ annealed barrier has large leakage current. However vanadium-based diffusion barrier annealed at $400^{\circ}C$ has good thermal stability. Therefore thermal stability of vanadium-based diffusion barrier is desirable for copper interconnection.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1329-1330
• /
• 2006

The effect of Cu on the hydrogen reduction of $MoO_3$ powders was investigated by measuring the humidity change during a non-isothermal process of hydrogen reduction. The presence of Cu induced a shift in the reduction temperature and strongly affected the reduction processes of $MoO_3\rightarrowMo_4O_{11}\rightarrowMoO_2$, which comprised the contained chemical vapor transport of $MoO_x(OH)_2$. This study suggests that the surface of the Cu grains acts as a nucleation site for the reduction of $MoO_x(OH)_2$ to $MoO_2$ particles from $MoO_3$ or $Mo_4O_{11}$. Such an activated reduction process results in the deposition of Mo and $MoO_2$ particles on the surface of the Cu.

• Carbon letters
• /
• 제27권
• /
• pp.98-107
• /
• 2018

Free-standing electrodes of CuO nanorods in carbon nanotubes (CNTs) are developed by synthesizing porous CuO nanorods throughout CNT webs. The electrochemical performance of the free-standing electrodes is evaluated for their use in flexible lithium ion batteries (LIBs). The electrodes comprising CuO@CNT nanocomposites (NCs) were characterized by charge-discharge testing, cyclic voltammetry, and impedance measurement. These structures are capable of accommodating a high number of lithium ions as well as increasing stability; thus, an increase of capacity in long-term cycling and a good rate capability is achieved. We demonstrate a simple process of fabricating free-standing electrodes of CuO@CNT NCs that can be utilized in flexible LIBs with high performance in terms of capacity and cycling stability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.68-72
• /
• 1997

In this paper, to obtain the YbB $a_2$C $u_3$ $O_{x}$ superconductor, the mixed Powders of Y $b_2$ $O_3$, BaC $O_3$, CuO and Y $b_2$BaCu $O_{5}$, BaCu $O_2$ were used and the various calcining conditions were applied for the 123 phase of YbB $a_2$C $u_3$ $O_{x}$. Samples were prepared by the mixed oxide method and calcined with various temperatures of 88$0^{\circ}C$ ~91$0^{\circ}C$ . It was observed that the distribution of YbB $a_2$C $u_3$ $O_{x}$ phase which was calcined at 90$0^{\circ}C$ for 12 hours and 99 hours. But the result of long time calcination(99 hrs), the 123 phase of YbB $a_2$C $u_3$ $O_{x}$ was existed between 89$0^{\circ}C$ and 91$0^{\circ}C$ . And the best case could be obtained at the calcination temp. of 90$0^{\circ}C$ from the mixed Powder of YbB $a_2$C $u_3$ $O_{5}$ and Bacu $O_2$ which were prepared individually.idually.

• Bulletin of the Korean Chemical Society
• /
• 제15권7호
• /
• pp.545-549
• /
• 1994

Using the extended Hackel molecular orbital method in connection with the tight binding model, we have studied electronic structure and related properties of the charged cluster models relating to superconducting $YBa_{2}Cu_{3}O_{7-x}$, crystals in which O-atoms in regular sites were selectively replaced with Se atoms. In analogy to the isomorphism problem with molecules, we discuss all possible combinations of Se-substitutions in O-sites with one, two, and four Se atoms. The calculations are carried out within charged cluster models for analogues of YBa-copper oxide. Our results suggest that the electronic structure of the symmetrically Se-substituted or Se-added compound is closer to that of the YBCO superconducting compound than that obtained from the unsymmetrical substitution. This applies in particular if O is replaced with Se around the Cu(1) site. Symmetrical substitutions in the $CuO_2$ layers give rise to large variations in the electronic structure of $YBa_{2}Cu_{3}O_{7}$. This is consistent with the fact that superconductivity is very sensitive to the electronic population of the $CuO_2$ layers.

• 청정기술
• /
• 제20권4호
• /
• pp.375-382
• /
• 2014

금속산화물이 담지된 허니컴 형상의 플라즈마-촉매 반응기를 이용하여 아이소프로필 알코올(isopropyl alcohol, IPA) 저감 및 부산물 생성 거동에 대해 조사하였다. 허니컴 형상의 다공질 세라믹 지지체(주성분: ${\alpha}-Al_2O_3$)에 금속산화물로 산화철($Fe_2O_3$) 또는 산화구리(CuO)를 담지시킨 후, 이 촉매가 동축 원통형 전극구조 내부에 위치하도록 플라즈마-촉매 반응기를 구성하였다. 플라즈마 반응에 의한 IPA 분해속도가 매우 빨랐기 때문에 IPA 분해효율 자체는 금속산화물 담지 여부 및 금속산화물 종류에 관계없이 유사한 것으로 나타났으나, 부산물 생성거동은 촉매종류에 따라 큰 차이를 보여주었다. 아세톤, 폼알데하이드, 아세트알데하이드, 메테인, 일산화탄소 등의 유해 부산물 농도는 $Fe_2O_3/{\alpha}-Al_2O_3$ < $CuO/{\alpha}-Al_2O_3$ < ${\alpha}-Al_2O_3$ 순으로 높게 나타났다. 유량 $1L\;min^{-1}$, IPA 초기농도 5,000 ppm(산소: 10%), 방전전력 47 W의 조건에서 얻어진 $CO_2$ 선택도는 ${\alpha}-Al_2O_3$, $CuO/{\alpha}-Al_2O_3$, $Fe_2O_3/{\alpha}-Al_2O_3$에 대해 각각 40, 80, 95%로서 $Fe_2O_3/{\alpha}-Al_2O_3$가 플라즈마-촉매를 이용한 IPA의 산화에 가장 효과적인 것으로 나타났다. 플라즈마를 단독으로 사용하여 휘발성유기화합물을 분해할 경우 타르형태의 생성물이 반응기에 퇴적되는 문제점이 있으나, 플라즈마-촉매 공정에서는 이러한 현상이 관찰되지 않았으며 촉매의 활성이 그대로 유지되었다.

• 한국분말재료학회지
• /
• 제26권1호
• /
• pp.1-5
• /
• 2019

In this study, porous Mo-5 wt% Cu with unidirectionally aligned pores is prepared by freeze drying of camphene slurry with $MoO_3-CuO$ powders. Unidirectional freezing of camphene slurry with dispersion stability is conducted at $-25^{\circ}C$, and pores in the frozen specimens are generated by sublimation of the camphene crystals. The green bodies are hydrogen-reduced at $750^{\circ}C$ and sintered at $1000^{\circ}C$ for 1 h. X-ray diffraction analysis reveals that $MoO_3-CuO$ composite powders are completely converted to a Mo-and-Cu phase without any reaction phases by hydrogen reduction. The sintered bodies with the Mo-Cu phase show large and aligned parallel pores to the camphene growth direction as well as small pores in the internal walls of large pores. The pore size and porosity decrease with increasing composite powder content from 5 to 10 vol%. The change of pore characteristics is explained by the degree of powder rearrangement in slurry and the accumulation behavior of powders in the interdendritic spaces of solidified camphene.

• 한국재료학회지
• /
• 제3권1호
• /
• pp.33-42
• /
• 1993

세라믹스를 공업분야에 응용범위를 확대하기 위한 최선의 수단으로 금속과의 복합화를 들수 있다. 금속과 복합화하는 방법중에서 세라믹스/금속접합은 부품의 제조등에 이용될 수 있는 수단으로 많은 연구가 행하여져서 이미 몇몇 부품에 대해서는 실용화가 되고 있고 현재에도 활발히 연구가 되고 있다. 따라서 본 연구에서는 여러가지 접합법중에서도 비교적 공정이 간편한 활성 브레이징법을 이용해 $Al_2$$O_3$ 와 304 스테인레스강을 접합하였으며 이때 삽입금속으로는 Cu-Ti합금을 사용하였고 접합온도 및 접합시간 범위는 각각 110$0^{\circ}C$-120$0^{\circ}C$, 0.5h-1.5h, 그리고 브레이징로 내의 분위기는 $10^{-3}$-$10^{-4}$ torr로 유지하였다. 접합후 접합부 조직에 대한 접합조건의 영향을 검토하고 반응생성물을 EDX, WDX 및 XRD을 이용해 분석하였으며 반응층형성을 위한 계면화학반응을 고찰하였다. 그 결과 알루미나와 삽입금속의 계면에서 접합을 유도하는 반응층은 T$i_2$$O_3$임을 확인할 수 있었다.

• 한국결정성장학회지
• /
• 제25권3호
• /
• pp.116-120
• /
• 2015

혼합이온 전도체인 $K_2NiF_4$-type 산화물인 $La(Ca)_2Ni(Cu)O_{4+{\delta}}$ 분말을 합성하여 결정구조 분석과 분말의 나노구조화에 따른 고체산화물 연료전지의 양극 성능을 비교 평가하였다. 이온 반경이 큰 Cu가 Ni 자리에 치환되어 Ni-O 팔면체 구조에서 c 축 방향으로 결정구조가 팽창하였으며, Ni-Cu의 Jahn-Teller 뒤틀림으로 산소이온 산화 환원 반응과 이온 전도도 특성에 영향을 주었다. 특히 나노구조의 $La(Ca)_2Ni(Cu)O_{4+{\delta}}$ 분말의 경우 표면 촉매성능이 향상되어 단위 전지 성능 향상 결과를 얻을 수 있었다. Ni-YSZ 음극 지지체에 8YSZ 전해질을 dip-coating한 후 $La(Ca)_2Ni(Cu)O_{4+{\delta}}$ 분말을 양극으로 도포하여 얻은 SOFC 단위성능 측정 결과 $800^{\circ}C$에서 $1w/cm^2$의 최대 출력 값을 얻을 수 있었다.