• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권4호
• /
• pp.9-18
• /
• 2012

This study was carried out to leach valuable metal ions from the mine waste ore using the adapted indigenous bacteria. In order to tolerance the heavy metals, the indigenous bacteria were repeatedly subcultured in the adaptation-medium containing $CuSO_4{\cdot}5H_2O$ for 3 weeks and 6 weeks, respectively. As the adaptation experiment processed, the pH was rapidly decrease in the adaptation-medium of 6 weeks more than the 3 weeks. The result of bioleaching with the adapted bacteria for 42 days, the pH value of leaching-medium in the 3 weeks tend to increased, whereas the pH of the 6 weeks decreased. In decreasing the pH value in the adaptation-medium and in the leaching-medium, it was identified that the indigenous bacteria were adapted $Cu^{2+}$ the ion and the mine waste ores. The contents of Cu, Fe and Zn in the leaching solution were usually higher leached in 6 weeks than 3 weeks due to the adaptation. Considering the bioleaching rates of Cu, Fe and Zn from these leaching solutions, the highest increasing the efficiency metal ion were found to be Fe. Accordingly, it is expected that the more valuable element ions can be leached out from the any mine waste, if the adapted bacteria with heavy metals will apply in future bioleaching experiments.

• Corrosion Science and Technology
• /
• 제20권5호
• /
• pp.249-255
• /
• 2021

In this work, we proposed a facile method to fabricate the three-dimensional porous copper current collector (3D Cu CC) for a Si-dominant anode in a Li-ion battery (LiB). The 3D Cu CC was prepared by combining chemical etching and thermal reduction from a planar copper foil. It had a porous layer employing micro-sized Cu balls with a large surface area. In particular, it had strengthened attachment of Si-dominant active material on the CC compared to a planar 2D copper foil. Moreover, the increased contact area between a Si-dominant active material and the 3D Cu could minimize contact loss of active materials from a CC. As a result of a battery test, Si-dominant active materials on 3D Cu showed higher cyclic performance and rate-capability than those on a conventional planar copper foil. Specifically, the Si electrode employing 3D Cu exhibited an areal capacity of 0.9 mAh cm^-2 at the 300^th cycles (@ 1.0 mA cm^-2), which was 5.6 times higher than that on the 2D copper foil (0.16 mAh cm^-2).

• 공업화학
• /
• 제35권4호
• /
• pp.352-359
• /
• 2024

Environmental pollution from heavy metal ions (HMIs) is a global concern. Recently, biosorption methods using cellulose sorbents have gained popularity. The objective of this study was to assess the removal efficiency of Cu(II), Pb(II), and Hg(II) ions at low concentration levels (100-700 ppb) from aqueous solutions using three different cellulose fiber-based filter media. Sample A was pure cellulose fiber, Sample B was 10% activated carbon-cellulose fiber, and Sample C was cellulose fiber-glass fiber-30% activated carbon-20% amorphous titanium silicate (ATS). The samples were characterized by several physicochemical techniques. The porosity measurements using N₂ sorption isotherms revealed that Samples A and B are nonporous or macroporous materials, whereas the addition of 50% filler materials into the cellulose resulted in a microporous material. The Brunauer-Emmett-Teller (BET) surface area and pore volume of Sample C were found to be 320.34 m²/g and 0.162 cm³/g, respectively. The single ion batch adsorption experiments reveal that at 700 ppb initial metal ion concentration, Sample A had removal efficiencies of 7.5, 11.5, and 13.7% for Cu(II), Pb(II), and Hg(II) ions, respectively. Sample B effectively eliminated 99.6% of Cu(II) ions compared to Pb(II) (14.2%) and Hg(II) (31.9%) ions. Cu(II) (99.37%) and Pb(II) (96.3%) ions are more efficiently removed by Sample C than Hg(II) (68.2%) ions. The X-ray photoelectron spectroscopy (XPS) wild survey spectrum revealed the presence of Cu(II), Pb(II), and Hg(II) ions in HMI-adsorbed filter media. The high-resolution C1s spectra of Samples A and B reveal the presence of -C-OH and -COOH groups on their surface, which are essential for HMIs adsorption via complexation reactions. Additionally, the ATS in Sample C facilitates the adsorption of Pb(II) and Hg(II) ions through ion exchange.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.133-133
• /
• 1998

In the thin film alloy formation of the transition metals ion-beam-mixing technique forms a metastable structure which cannot be found in the arc-melted metal alloys. Sppecifically it is well known that the studies about the electronic structure of ion-beam-mixed alloys pprovide the useful information in understanding the metastable structures in the metal alloy. We studied the electronic change in the ion-beam-mixed ppt-Ct alloys by XppS and XANES. These analysis tools pprovide us information about the charge transfer in the valence band of intermetallic bonding. The multi-layered films were depposited on the SiO2 substrate by the sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr. These compprise of 4 ppairs of ppt and Cu layers where thicknesses of each layer were varied in order to change the alloy compposition. Ion-beam-mixing pprocess was carried out with 80 keV Ae+ ions with a dose of $1.5\times$ 1016 Ar+/cm2 at room tempperature. The core and valence level energy shift in these system were investigated by x-ray pphotoelectron sppectroscoppy(XppS) pphotoelectrons were excited by monochromatized Al K ａ(1486.6 eV) The ppass energy of the hemisppherical analyzer was 23.5 eV. Core-level binding energies were calibrated with the Fermi level edge. ppt L3-edge and Cu K-edge XANES sppectra were measured with the flourescence mode detector at the 3C1 beam line of the ppLS (ppohang light source). By using the change of White line(WL) area of the each metal sites and the core level shift we can obtain the information about the electrons pparticippating in the intermetallic bonding of the ion-beam-mixed alloys.

• 폴리머
• /
• 제38권6호
• /
• pp.801-808
• /
• 2014

광경화 아크릴고분자 필름에서 이온이동에 관한 연구를 하였다. 고분자에 결합된 아민기와 카르복실산 작용기의 함량을 조절하여 수소이온과 수산화이온의 이동에 적합한 필름을 제조하였다. 수소이온 이동 검출을 위해 p-methylred(PMR) 유도체를 사용하였고 수산화이온 검출을 위해 페놀프탈레인 유도체를 합성하여 각각 고분자에 도입하였다. 수소이온의 이동은 아민기의 함량이 많을수록 빠르게 진행되었고 수산화이온은 카르복실산의 함량이 높을수록 빠르게 이동하였다. 수소이온 이동은 필름표면과 내부로 빠르게 진행하였고 PMR 포함 필름의 흡수스펙트럼을 통해 관찰되었다. 산 용액에 감응하는 필름을 사용하여 색상변화의 가역성을 관찰하였고 연속 50회를 실시하는 동안 정확히 재현되었다. 구리(II) 이온은 카르복실산 작용기의 함량이 높은 필름에서 빠르게 이동하였다. 로다민이 도입된 필름에서 구리이온의 배위로 로다민의 고리열림 반응이 진행되었고 광흡수 및 발광특성 측정을 통해 구리이온의 이동을 추적하였다.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.13-26
• /
• 2018

This research was conducted to elucidate the removal mechanism of heavy metals and sulfate ion from acid mine drainage(AMD) by porous zeolite-slag ceramics (ZS ceramics) packed in a column reactor system. The average removal efficiencies of heavy metals and sulfate ion from AMD by the 1:3(Z:S) porous ZS ceramics in the column reactor under the HRT condition of 24 hours were Al 97.5%, As 98.8%, Cd 86.1%, Cu 96.2%, Fe 99.7%, Mn 64.1%, Pb 97.2%, Zn 66.7%, and $SO_4{^{2-}}$ 76.0% during 121 days of operation time. The XRD analysis showed that the ferric iron from AMD could be removed by adsorption and/or ion-exchange on the porous ZS ceramics. In addition it was known that Al, As, Cu, Mn, and Zn could adsorb or coprecipitate on the surface of Fe precipitates such as schwertmannite, ferrihydrite, or goethite. The EDS analysis revealed that Al, Fe, and Mn, which were of relatively high concentration in the AMD, would be adsorbed and/or ion-exchanged on the porous ZS ceramics and also exhibited that Al, Cu, Fe, Mn, and Zn could be precipitated as the form of metal hydroxide or sulfate and adsorbed or coprecipitated on the surface of Fe precipitates. The microscopic results on the porous ZS ceramics and precipitated sludge in a column reactor system suggested that the heavy metals and sulfate ion from AMD would be eliminated by the multiple mechanisms of coprecipitation, adsorption, ion-exchange as well as precipitation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.60-60
• /
• 2000

The adhesion interface formation between copper and poly(ethylene terephthalate)(PET), poly(methyl methacrylate)(PMMA) and Polyimide films was treated using Ion assisted reaction system to sequential sputter deposition by High-Frequency ion source. The ion beam modification system used a new type of low power HF ion thruster for space application as new low thruster electric propulsion system. Low power HF ion thruster with diameter 100mm gives the opportunity to obtain beams of Ar+ with currents 20~150 mA (current density 0.5~3.5 mA/cm2) and energy 200~2500eV at HF power level 10~150 W. Using Ar as a working gas it is possible to obtain thrust within 3~8 mN. Contact angles for untreated films were over 95$^{\circ}$ and 80 for Pet, 10o for PMMA and 12o for PI samples as a condition of ion assisted reaction at the ion dose of 10$\times$1016 ions/cm2, the ion beam potential of 1.2 keV and 4 ml/min for environmental gas flow rate. 900o peel tests yielded values of 15 to 35 for PET, 18 to 40 and 12 to 36 g/min. respectively. High resolution X-ray photoelectron spectrocopy is the Cls region for Cu metal on these polymer substrates showed increases in C=O-O groups for polymide, whereas PET and PMMA treated samples showed only C=O groups with increase the ion dose. Finally, unstable polymer surface can be changed from hydrophobic to hydrophilic formation such as C-O and C=O that were confirmed by the XPS analysis, conclusionally, the ion assisted reaction is very effective tools to attach reactive ion species to form functional groups on C-C bond chains of PET, PMMA and PI.

• 대한환경공학회지
• /
• 제29권8호
• /
• pp.930-937
• /
• 2007

본 연구에서는 소나무 종류인 Pinus densiflora로부터 채취한 수피를 이용하여 수용액으로부터 구리 제거를 위한 회분식 흡착 실험을 수행하였다. 구리 흡착에 수피의 화학적 처리가 미치는 효과를 알아보기 위해 1 N 수산화나트륨(NaOH)과 1 N 염산(HCl)을 이용하여 전처리하였다. 구리 농도가 100 mg/L이고 pH가 $3\sim6$인 수용액에서 수산화나트륨(NaOH)을 이용한 수피의 화학적 전처리는 구리의 흡착량을 $139\sim184%$ 정도 증가시키는 효과를 나타냈으나, 염산(HCl)을 이용한 수피의 전처리는 구리의 흡착량을 $37\sim42%$ 정도 감소시키는 효과를 나타냈다. 대체적으로 수피에 의한 구리 흡착은 pH $5\sim6$에서 최대 흡착량을 나타내기는 하였으나, 주어진 pH 범위내에서 수용액의 pH가 구리 흡착에 미치는 효과는 크지 않았다. 수피의 구리 흡착은 유사 2차 동역학 모델로 설명이 가능하였으며, 수산화나트륨(NaOH)으로 전처리한 수피의 경우 초기 농도가 100 mg/L에서 2배로 증가함에 따라 유사 2차 동역학 모델식으로부터 계산된 흡착량$(q_e)$은 6.58 mg/g에서 12.77 mg/g로 증가한 반면에 속도 상수$(k_2)$는 0.284 g/mg/min에서 0.014 g/mg/min으로 감소하였다. 수피의 구리 흡착특성은 Langmuir와 Freundlich 등온식에 의해 모두 잘 표현되는 것으로 나타났다. 수피에 존재하는 카르복실산(carboxylic acid, RCOOH)이 구리 이온의 흡착에 관여하는 것이 확인되었으며, 특히 수산화나트륨을 이용하여 전처리한 수피에서 나타나는 구리의 높은 흡착효율은 수피에 존재한 에스테르(ester) 화합물과 카르복실산(carboxylic acid) 화합물이 가수분해되어 생성된 카르복실산 염(sodium carboxylate) 때문인 것으로 판단되었다.

• 한국재료학회지
• /
• 제10권1호
• /
• pp.77-82
• /
• 2000

1 keV $Ar^+$ 이온빔을 이용하여 polytetrafluoroethylene (PTFE)의 표면을 개질하고 그 위에 $5000\;{\AA}$의 구리 박막을 이온빔 스퍼터링법을 이용하여 증착하였다. 이온빔 조사에 의하여 PTFE의 표면에는 cone이 형성되며 cone의 높이는 이온 조사량이 증가함에 따라 점차로 증가함을 알 수 있었다. x-ray photoelectron spectroscopy (XPS) 분석을 통하여 조사된 PTFE의 표면에서는 이온 조사량이 증가함에 따라 Fls peak의 강도가 감소하며 이는 F 원자의 선택적인 스퍼터링에 기인한 것으로 생각된다. 또한 이온 조사에 의해 생성된 불안정한 사슬들은 crosslinking에 의하여 새로운 C-F 계열의 결합들을 생성하였다. 이온빔 스퍼터링법에 의하여 증착된 구리 박막은 PTFE 표면의 cone을 따라 균일하게 증착되며 PTFE의 표면 거칠기가 증가함에 따라 (111) 방향으로 우선 성장함을 알 수 있었다. 증착된 구리 박막의 비저항은 개질전 PTFE의 $2.7{\mu}{\Omega}cm$에서 $1{\tiems}10^{16}/\textrm{cm}^2$의 이온 조사량으로 개질된 PTFE의 $4.3{\mu}{\Omega}cm$까지 이온 조사량에 따라 점차로 증가하였다. $1{\tiems}10^{17}/\textrm{cm}^2$의 이온 조사량으로 개질된 PTFE 위에 증착된 구리 박막의 갑작스런 비저항 증가는 구리 박막의 단락에 의한 것으로 보인다.

• 한국미생물·생명공학회지
• /
• 제31권3호
• /
• pp.211-215
• /
• 2003

고함량 RMh 효모인 Saccharomyces cerevisiae MTY62를 당밀과 com steep liquor를 공급하는 유가배양에서, 세포농도는 45g-DCW/L 이하, RNA 함량은 140mg/g-cell 로 얻어졌다. 이는 균체증식과 RMh축적에 당밀 내에 존재하는 저해물질 때문으로 생각되어 이를 제거하기 위해 다양한 당밀 전처리제의 효과를 조사하였다. 당밀로부터 금속이온 제거 효과는 Na2HPO4와 EDTA를 혼합 처리했을 때 $Ca^{++}$ 는 90% 이상 $Cu^{++}$ 는 약 80% 제거하는 결과를 나타내었고, Na2HPO4와 EDTA, IonClear BigBead 등의 3가지를 혼합 처리했을 때는 $Ca^{++}$ , $Cu^{++}$ 둘 다 90% 이상 제거되는 결과를 나타내었다. Na2HPO4+EDTA처리 당밀의 경우세포내 invertase활성을 크게 증가시켰다. 전처리 당밀로 회분배양한 결과, 세포농도는 18.6g-DCW/L, RNA농도는 3127mg/l, 최대비증식속도($\mu_{max}$ )는 0.459 $h^{-1}$ , 환원당 비소모속도(g-sugar/g-cell$.$h)는 1.28로,대조구에 비해 각각 10%, 17%, 47%, 36%로 증가한 값을 보였다.