• 제목/요약/키워드: Cu Foam

검색결과 32건 처리시간 0.022초

Release of Cu from SDS micellar solution using complexing agents

  • 김호정;백기태;김보경;이율리아;양지원
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.307-310
    • /
    • 2004
  • Micellar enhanced ultrafiltration (MEUF) is a surfactant-based separation process and it can remove heavy metal ions from aqueous stream effectively. However, it is necessary to recover and reuse surfactants for economic feasibility because surfactant is expensive. Foam fractionation was investigated for both anionic and cationic surfactant recovery. Chelating agent such as ethylenediaminetetraacetic acid (EDTA) was studied for the separation of heavy metals from surfactant solution. Anionic surfactants bound with heavy metals can be recovered by lowering pH (acidification). In this study, citric acid and imminodiacetic acid (IDA) were applied to release copper from sodium dodecyl sulfate (SDS) micellar solution and compared with EDTA. Precipitation of copper by ferricynide and sodium sulfide were also investigated. As a result, ca. 100 % of copper was released from SDS micellar solution by 5 mM of EDTA and citric acid. And 3.3 mM of ferricyanide formed precipitate with 82.7 % of copper. 5 mM of IDA and sodium sulfide released or formed precipitate 82.5 % and 58.9 % of copper, respectively. Citric acid is harmless to environments and ferricyanide precipitates with Cu easily. Therefore, it is considered that citric acid and ferricyanide have competiveness over a famous chelating agent, EDTA, for the separation of Cu from SDS solution.

  • PDF

Inhibitory Effect of Chlorogenic Acid on Low-Density Lipoprotein Oxidation Induced by Cu ion

  • Jeon, Eun-Raye;Karki, Rajendra;Kim, Dong-Wook
    • 한국자원식물학회지
    • /
    • 제23권6호
    • /
    • pp.519-525
    • /
    • 2010
  • Chlorogenic acid, formed of an ester of caffeic acid and quinic acid, which is naturally abundant in many plant species, was used as a model O-dihydoxy phenolic compound. In the previous study, we have reported that the isolated constituent from Apocynum venetum leaves has an inhibitory effect on $Cu^{2+}$-induced oxidative modification of low-density lipoprotein (LDL). Among them, chlorogenic acid showed the most potent anti-LDL oxidative activity than other compounds. For the reason, we investigated the inhibitory effect of the chlorogenic acid on $Cu^{2+}$-induced oxidative modification of LDL, monitored a lag time in the conjugated-diene formation and TBARS formation, and measured TNBS free amino acid group, and form cell formation in vitro system. The TBARS- and diene- formation were strongly inhibited by chlorogenic acid ($0{\sim}100\;{\mu}g/ml$) with dose dependent manner. On the other hand, TNBS reactive lysine amino groups on LDL oxidation were protected by chlorogenic acid- treated cell group. Therefore, chlorogenic acid inhibited to cholesterol accumulation in the isolated peritoneal macrophage.

기공 경사화된 나노 구조의 니켈-구리 거품 전극 (Pore Gradient Nickel-Copper Nanostructured Foam Electrode)

  • 최우성;신헌철
    • 전기화학회지
    • /
    • 제13권4호
    • /
    • pp.270-276
    • /
    • 2010
  • 기공 경사화된 마이크론 단위의 구조 틀 및 나노 수지상 구조 벽을 가지는 니켈-구리 거품 전극을 전기화학적인 방법으로 합성하였다. 전해 도금 시 순수한 니켈은 치밀한 층으로 성장하는 양상을 보였으나, 구리와 함께 도금시키는 경우 그 성장 양상이 순수한 니켈과는 매우 다르게 관찰되었다. 특히, 첨가제로써 염소 이온의 농도가 증가함에 따라 니켈-구리 도금 층의 수지상 성장이 뚜렷해지는 모습을 보였다. 또한, 기재와 먼 부분일수록 도금 층 내 구리 대비 니켈의 상대적인 양이 감소하였으며, 염소 이온 농도가 높아짐에 따라 전 도금 층에 걸쳐 니켈의 양이 증가하였다. 수지상 구조 벽의 가지 내부 조성을 분석한 결과, 중심부로 갈수록 구리 함량이 점차 높아지는 조성 구배를 확인하였으며, 적절한 열처리를 통해 상호 확산을 유도하여 균일한 조성의 니켈-구리 합금을 얻어낼 수 있었다. 본 연구를 통해 제작된 재료는 기능성 전기 화학 장치용 고성능 전극에 활용될 수 있을 것으로 기대된다.

Application of Polyurethane Foam Loaded with a Schiff Base Ligand for Determination of Trace Amounts of Copper in Water Samples by Flame Atomic Absorption Spectroscopy

  • Moftakhar, Mahdieh Koorehpazan;Yaftian, Mohammad Reza;Nahaei, Samaneh;Zamani, Abbas Ali
    • 대한화학회지
    • /
    • 제58권3호
    • /
    • pp.283-288
    • /
    • 2014
  • A column solid phase extraction procedure based on modified polyurethane foam (PUF) by a newly synthesized Schiff base ionophore, named 2,2'-{iminobis[propane-3,1-diylnitrilo(1E)prop-1-yl-1-ylidene]}diphenol, was developed for preconcentration step of trace amounts determination of copper ions in water samples by atomic absorption flame spectroscopy. The influence of parameters on the adsorption process such as sample pH, amount of modified PUF packed in the column, type and volume of stripping reagent and its flow rate were investigated and optimized. Under optimum experimental conditions, the calibration graph was linear in a relatively wide range ($0.005-210{\mu}g/ml$) with a limit of detection $0.002{\mu}g/ml$ of copper. The proposed method allows achieving to a concentration factor of >133. The capacity of a column (1.6 cm i.d.) packed by 6 g of PUF modified by 12 mg of the Schiff base was found to be $247.7({\pm}2.1){\mu}g$ of copper. It was found that the adsorption process was highly selective towards copper ions with respect to some associated metal ions. The presented procedure was successfully applied for determination of copper in some water samples.

경주 덕천리 유적 출토 금동장식의 보존처리 및 과학적 분석 연구 (A Study of Conservation treatment and Scientific Analysis for Gilt-bronze ornament Excavated from DeokCheon-Ri, Gyeong Ju)

  • 서정은;한민수;함철희
    • 보존과학연구
    • /
    • 통권27호
    • /
    • pp.23-42
    • /
    • 2006
  • This study is about gilt bronze ornament, that is from Deok Cheon-Ri in Gyeong Ju, of conservation treatment process and of scientific analysis. This relic gathered with soil around the relic by Polyurethane foam. While the relic got rid of soil, Took X-rays. As the result, we decided to process reconstruction as condition that the relic was dug up. After the conservation treatment processed, we made a frame to display the relic. Investigated manufacture techniques of the relic after the conservation treatment processed, and thenexecuted scientific analysis of the relic for a chemical experiment. A analysis of the results of components for composition layers using the SEM-EDS can be briefly summarized as below; Firstly, the average contents of outer, inner and body corrosion layer have a Cu-60.9~39.3wt% and analyzed a little impurities material which is Fe-0.5wt%.Secondly, the average contents of body have a Cu-99.7wt% which was using manufactured by pure copper. Thirdly, gold layer have a mercury of 9.5wt% which indicate that layer was manufactured by mercury amalgam gilding technique.

  • PDF

난백의 숙감수성에 관한 연구 II. 금속염의 첨가와 pH가 난백의 열감수성에 미치는 영향 (Studies on Heat Sensitivity of Egg Albumen II. Effects of pH and/or the Addition of Metal ions on Heat Sensitivity of Egg Albumen)

  • 유익종;이성기;김영붕
    • 한국가금학회지
    • /
    • 제16권1호
    • /
    • pp.17-22
    • /
    • 1989
  • 난백의 열광수성을 순화시키기 위하여 각종금속염(Fe$^{2+}$, Fe$^{3+}$ , $Al^{3+}$ , Cu$^{2+}$)을 첨가하고 가훈처리($60^{\circ}C$, 5분간) 전후 난백의 기능성을 검토하였으며 알루미늄염(Al$^{3+}$ )이 첨가된 난백의 pH에 대한효과도 검토하였다. 금속염의 첨가에 의해 가열처리 전후 난백의 탁도는 대체로 증가하였으나 알루미늄염의부가시 탁도의 변화가 가장 작았다. 난백의 기포력은 금속염의 첨가에 의해 전반적으로 증가하였으며 Fe$^{3+}$ 의 첨가효과가 가장 컸다. 특히 가열처리 후 난백의 기포력은Fe$^{3+}$ , Al/ sup 3+/ 및 Cu$^{2+}$의 첨가에 의해 크게 증가되었다. 기포안정성의 경우 열처리 전에는 Fe$^{3+}$ , Al/ sup 3+/의 첨가효과가 있었으나 열처리 후에는 Fe$^{3+}$ 와 Al/ sup 3+/의 첨가가 효과적이었다. 한편 알루미늄염을 첨가한 난백을 pH 7 -10의 범위에서 가열처리한 결과 pH 7-8.5 범위에서는 탁도 및 기포성의 변화가 크지 않았고 pH 9이상에서는 탁도와 기포성은 낮아졌으나 기포안정성은 향상되었다. 난백액에 Salmonella typhimurium을 $10^{6}$ cells/$m\ell$수준으로 접종 후 $60^{\circ}C$, 5분간의 가열처리 결과 pH에 상관없이 모두 사멸되었다.

  • PDF

사상 체질 처방의 항동맥경화 효능 비교 연구 -열다한소탕, 양격산화탕, 청심연자탕, 태음조위탕- (Anti-atherosclerotic Effects of Herbal Formulas for Sasang Constitutional Medicine)

  • 김온순;김예지;신현규
    • 사상체질의학회지
    • /
    • 제24권4호
    • /
    • pp.51-61
    • /
    • 2012
  • Objectives : The purpose of this study was to investigate the anti-atherosclerotic effects of 4 herbal formulas for Sasang constitutional medicine (Yeoldahanso-tang: YDHST, Yanggyeoksanhwa-tang: YGSHT, Cheongsimyeonja-tang: CSYJT and Taeeumjowi-tang: TEJWT). Methods : The antioxidant activities of herbal formulas were studied by measuring free radical scavenging activities on ABTS and DPPH. The inhibitory effects on LDL oxidation was evaluated by the formation of TBARS, REM and fragmentation of apolipoprotein B-100 (ApoB). Effects of herbal formulas on macrophage lipid accumulation were determined in native LDL and LPS co-incubated macrophages using Oil Red O staining. Results : The scavenging activities on ABTS and DPPH of herbal formulas were increased in dose-dependent manner (YDHST>YGSHT>CSYJT>TEJWT). Herbal formulas reduced the oxidation properties of LDL induced by $CuSO_4$. YDHST, YGSHT and CSYJT showed strong suppressive effect on LDL oxidation than TEJWT. In addition, YDHST, YGSHT and CSYJT significantly inhibited foam cell formation in LDL/LPS stimulated RAW 264.7 cells. Conclusions : These results demonstrate that YDHST, YGSHT and CSYJT have potentials on anti-atherosclerosis by antioxidative effect and suppressive effect on LDL oxidation.

Laccase Production Using Pleurotus ostreatus 1804 Immobilized on PUF Cubes in Batch and Packed Bed Reactors: Influence of Culture Conditions

  • Prasad K. Krishna;Mohan S. Venkata;Bhaskar Y. Vijaya;Ramanaiah S. V.;Babu V. Lalit;Pati B. R.;Sarma P. N.
    • Journal of Microbiology
    • /
    • 제43권3호
    • /
    • pp.301-307
    • /
    • 2005
  • The feasibility of laccase production by immobilization of Pleurotus ostreatus 1804 on polyurethane foam (PUF) cubes with respect to media composition was studied in both batch and reactor systems. Enhanced laccase yield was evidenced due to immobilization. A relatively high maximum laccase activity of 312.6 U was observed with immobilized mycelia in shake flasks compared to the maximum laccase activity of free mycelia (272.2 U). It is evident from this study that the culture conditions studied, i.e. biomass level, pH, substrate concentration, yeast extract concentration, $Cu^{2+}$ concentration, and alcohol nature, showed significant influence on the laccase yield. Gel electrophoretic analysis showed the molecular weight of the laccase produced by immobilized P. ostreatus to be 66 kDa. The laccase yield was significantly higher and more rapid in the packed bed reactor than in the shake flask experiments. A maximum laccase yield of 392.9 U was observed within 144 h of the fermentation period with complete glucose depletion.

유통 산화형 염모제의 접촉성피부염 유발물질 함량 연구 (A Study on Contact Dermatitis-Causing Substances Concentration in Commercial Oxidative Hair-Coloring Products)

  • 나영란;구희수;이승주;강정미;진성현
    • 대한화장품학회지
    • /
    • 제40권2호
    • /
    • pp.203-214
    • /
    • 2014
  • 시중에 유통 중인 산화형 염모제 28건을 대상으로 접촉성피부염 유발 성분 함량 조사를 수행하여, 관련분야에 기초자료를 제공하고자 본 연구를 수행하였다. 접촉성피부염을 유발하는 물질로 산화염료 10종(p-phenylenediamine, toluene-2,5-diamine, m-phenylenediamine, nitro-p-phenylenediamine, p-aminophenol, m-aminophenol, o-aminophenol, p-methylaminophenol, N,N'-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, 2-methyl-5-hydroxyethylaminophenol)과 중금속 4종(니켈; Ni, 크롬; Cr, 코발트; Co, 구리; Cu)을 선정하였다. 10종의 접촉성피부염 유발 산화염료의 함량조사를 위하여 헥산-2% 아황산나트륨을 이용하여 빠르고 간단하게 시료전처리를 하였고, 초고성능액체크로마토그래피를 이용하여 분석시간이 12 min으로 짧은 동시분석조건을 확립하였다. 분석 결과 10종의 산화염료 성분은 제품에 표기된 성분이 모두 확인되었고, 각 성분의 농도는 의약품등 표준제조규정에 제시된 사용할 수 있는 농도상한 이하로 나타났다(식품의약품안전처 고시 제2013-228호). 또한, 4종의 중금속성분을 확인하기 위하여 microwave를 이용하여 시료를 분해하였고, 유도결합플라즈마분광계를 이용하여 정량 분석하였다. 각 제품에서 중금속별 검출량은 Ni 0.572 ${\mu}g/g$, Cr 3.161 ${\mu}g/g$, Co 2.029 ${\mu}g/g$, Cu 0.420 ${\mu}g/g$이었다. 염모제의 성상별 중금속 농도를 비교한 결과 분말타입(헤나) 염모제의 평균 중금속 농도는 Ni 1.800 ${\mu}g/g$, Cr 10.127 ${\mu}g/g$, Co 7.082 ${\mu}g/g$, Cu 1.451 ${\mu}g/g$로 거품타입이나 크림타입 보다 높았다. 염모제를 흑색, 흑갈색, 갈색, 짙은 갈색, 옅은 갈색, 붉은 갈색의 6개 색상으로 구분하여 분석한 결과, 갈색의 경우 Co 농도가 가장 높고 나머지 색상에서는 모두 Cr의 농도가 높은 것을 알 수 있었다.

3차원 기공구조를 이용한 정전기반 에너지 하베스팅 나노발전기 소자제조 (3D Porous Foam-based Triboelectric Nanogenerators for Energy Harvesting)

  • 전상헌;정정화;홍석원
    • 마이크로전자및패키징학회지
    • /
    • 제26권1호
    • /
    • pp.9-15
    • /
    • 2019
  • 본 연구에서는 3차원 기공구조를 지닌 금속 및 고분자 소재를 이용한 수직 마찰모드의 정전기반 나노발전기(triboelectric nanogenerator, TENG) 제조기술을 소개하고 이에 관한 응용 연구를 수행하였다. 다양한 장점을 지닌 3차원 기공구조를 활용하여 설계된 간단하며 효율적인 나노발전기로, 반복적인 접촉/분리를 통해, 120 V에 이르는 순간 전압특성과 최대 출력 $0.74mW/m^2$을 획득하였다. 실제적인 응용 연구로 48개의 발광소자 구동 실험을 실시하였으며, 저전력 소비 전자소자 장치로의 응용 확장성을 확인하기 위해 회로 구성을 통한 커패시터 축적기능을 확인하였다. 본 연구에서 소개하는 정전기반 에너지 하베스팅 기술은 매우 경제적으로 제조할 수 있는 실용적인 접근방식으로, 반복적으로 가해지는 마찰에 의한 정전력을 효율적으로 획득하여 가까운 미래에 자가발전(self-powered)형 소형 전기소자 구동, 휴대형 전자기기 및 대규모의 전자 발전 장치에 적용 가능할 것으로 기대된다.