• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.121-128
• /
• 2005

A study on the selective separation of $^{99}Tc,\;^{94}Nb,\;^{55}Fe,\;^{90}Sr$ and $^{59}Ni(^{63}Ni)$ from various radioactive wastes discharged from the nuclear power plants in Korea is being performed for use in their quantifications which are indispensible for the evaluation of the radionuclide inventory. Separation behaviour of Ce, Ca, Mg, Al, Cr, Ti, Mn and Cu recovered along with Ni during the separation of Re (as a surrogate of $^{99}Tc$), Nb, Fe and Sr by anion exchange and Sr-Spec extraction chromatography was investigated by cation exchange and Ni-Spec extraction chromatography using synthetic radioactive waste dissolved solutions containing matrix elements such as Re, Nb, Fe, Sr, Ni, B, Na, K, Ce, Co, Ca, Mg, Al, Zn, Cr, Pb, Cd, Mo, Mn, Cu, Zr, Ti and U. To purify the Ni fraction recovered and prepare a radionuclide source available for gas proportional counting, an application of the Ni precipitation procedure with dimethylglyoxime in the medium of ammonium citrate and tartaric acid solutions as a masking agent for co-existing metal ions was described in detail.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.125-137
• /
• 1997

To study the vertical variation of heavy metal and Rare Earth Element (REE) contents in deep-sea sediments, eighteen cores were sampled from the Korea Deep-sea Environmental Study (KODES)-96 area in the C-C zone (Clarion-Clipperton fracture zone), northeast equatorial Pacific. Sediment columns can be divided into three units based on sediment colors and geochemical characters; uppermost Unit I with brown color, middle Unit II with pale brown color and smaller Ni/Cu ratio than the ratio in Unit I, and lowermost Unit III with dark (brown) colors and higher contents of Mn, Ni, Cu, and REEs than those in Unit I and II. Unit II can be divided more into two layers of upper Unit IIa and lower Unit IIb. Unit IIb is characterized by high contents of Cu, 3+REEs (REEs except Ce), smectite, and severely deteriorated fossil tests. Unit III can also be divided into two units; upper Unit IIIa with dark brown color, and lower Unit IIIb with black color and enriched Mn and Fe. The KODES area was located near from the East Pacific Rise (EPR) When Unit III Sediments were deposited, considering the hiatus between Unit II and III (Quaternary-Tertiary boundary) and the spreading rate (10 cm/yr) and direction (north southern west) of the Pacific plate from the EPR. High contents of Mn and Fe in Unit IIIb may be related with hydrothermal influence from the EPR. Meanwhile, Unit IIb (about 2~3 Ma) and Unit III (11~30 Ma) layers were probably formed near (or under) the equatorial high productivity zone, and accordingly received a lot of organic materials. As a result, Cu and 3+REEs, closely associated with organic materials, are enriched in smectite and/or Ca-P composites (fish bone debrise, biogenic apatite) after decomposition and reprecipitation on the sea floor. Higher contents of Cu and 3+REEs in Unit IIb and III are suggested to be the result of abundant supply of organic substances in the equatorial high productivity zone.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.358-370
• /
• 1988

Several new ion exchange resins have been synthesized from chloromethyl styrene-1,4-divinylbenzene(DVB) with 1%, 2%, 4%, and 10%-crosslinking and macrocyclic ligands of cryptand type by interpolymerization method. The adsorption characteristics and the pH, time, solvents and concentration dependence of the adsorption of metal ions by this resin were studied. The correlation between the separation characteristics of uranium, rare earths and transition metal on the resins and the stability constants of complexes with macrocyclic ligands have been examined. The resins were very stable in both acidic and basic media and have good resistance to heat at $280^{\circ}C$. The $UO_2^{+2}$ aqueous solution are not adsorbed on the resins below pH 3.0, but the power of adsorption of $UO_2^{2+}$ increased rapidly above pH 4.0. The optimum equilibrium time for adsorption of metallic ions was twenty minutes and adsorptive power decreased in proportion to crosslinking size of the resins and order of dielectric constants of solvents used and the selective sequence for metal cations is in the order of $UO_2^{2+},\;Cu^{2+}\;and\;Nd^{3+}$.

• Resources Recycling
• /
• v.21 no.2
• /
• pp.3-8
• /
• 2012

In the points of the environmental conservation and the recirculating utilization of limited resources, it is very important to recover valuable metals like Au, Ag, Pd, Cu, Sn, Ni, Co, and Li used as industrial raw materials from urban ores. From now, many processes have been developed for recovering the valuable metals contained in urban ores and some of them have been operated commercially. In the paper, pyrometallurgical processes developed for reclaiming valuable metals from urban ores will be briefly introduced.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.44-52
• /
• 2018

In this study, copper was recovered from copper containing sludge by selectively controlling electro-refining process conditions in copper sulfate electrolyte solution. Electro-refining process was performed by LSV (Linear Sweep Voltammetry) result according to copper sulfate electrolyte solution concentration, applied current density, additive type and concentration. SEM (Scanning Electron Microscope) and PSA (Particle Size Analyzer) were used to analyze the shape and size of copper powder. In the 0.1 ~ 0.4 M copper sulfate electrolyte solution without organic additives, the copper powder size decreased as the applied current density became closer to the limiting current density and the copper powder size tended to decrease in 0.2 ~ 0.3 M copper sulfate electrolyte solution. In addition, when the shape and size of the copper powder were analyzed by adding various types and concentrations of organic additives to the previous experimental, fine spherical copper powder having the smallest size (nm) was obtained under the condition of cellulose type additive 2,000 ppm.

• Journal of Applied Biological Chemistry
• /
• v.55 no.3
• /
• pp.173-178
• /
• 2012

Sucrose-glucan glucosyltransferase (Gtf) is an important enzyme involved in the cavity formation process where insoluble glucan is synthesized. In this study, we purified Gtf from Streptcoccus mutans Ingbritt through ammonium sulfate precipitation, Sephadex G-150, CM-Sephadex, and DEAE-Sephadex column chromatographies. A 13-fold of purification was achieved with a total yield of 6.3%. The apparent molecular mass of the enzyme was determined to be 66 kDa on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The optimal pH and temperature were established to be 6.0 and $40^{\circ}C$, respectively. The enzyme activity could be inhibited to 22-59% by 1 mM $Hg^{2+}$, $Cu^{2+}$ and $Al^{3+}$, and to 68% by 1 mM EDTA. It was also inhibited 40% by 2 mM xylitol and 35-45% by 0.05% soluble chitosan, glycol chitosan, and glycol chitin. This is the first report to reveal the inhibition effect of chitin derivatives on Gtf activity, which may be further applicable to develop gargles to overcome cavity.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.90-98
• /
• 2003

An allium rhizobacterium Serratia plymuthica AL-1 was previously selected as a biocontrol agent of allium white rot. The chitinase from S. plymuthica AL-1 produced in medium containing colloidal chitin was purified by ammonium sulfate precipitation (40~70%), affinity adsorption, column chromatography on DEAE-sephadex A-50 and sephadex C-200 gel filtration. The enzyme was purified 10.8-fold with a yield of 7.3% from the starting culture broth. The purified chtinase gave a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis, it's molecular weight was estimated to be 55 kDa. The optimum pH and temperature of the purified enzyme were pH 5.5 and $55^{\circ}C$, respectively and it is stable up to $50^{\circ}C$ and maintains around 90% of its activity for 60min. The enzyme were activated by $Ca^{2+}$, $Mn^{2+}$ and $Mg^{2+}$ and inhibited by $Cu^{2+}$, SDS, $\rho$-CMB, MIA, respectively. The purified chitinase showed broad spectrum of antifungal activities against plant pathogenic fungi Sclerotium cepivoruin, Alternana alternnta, Colletotrichum glceosporioidrs, Phoma sp., Sclerotinia sclerotiorum, Stemphylium solani, Fusarium oxysporium f. sp. niveum but rarely inhibited Phytophthora capsici and Pythium ultimum.. The purified chitinase from S. plymuthica AL-1 caused swelling, lysis, deceleration and degradation of the hyphal tips of S. sczerotiorum causing allium white rot. It suggest that S. prymuthica AL-1 chitinase play an important part in the bifunctional chitinase / lysozyme activity.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.329-334
• /
• 1993

The formation of Mo(VI)-alizarin red S chelate ion its extraction into an organic solvent by ion-pairing for the separarive determination of trace Mo(VI) in natural water was applied in seawater samples. Removed Fe(III) and Zn(II), and Cu(II) by precipitating with anthranilic acid at pH 4.0 and 2.0, seawater 100mL was sampled in 250mL separatory funnel. After Mo(VI)-ARS chelate ion was formed by adding 0.01M alizarin red S solution 1.0mL to the water sample of pH 4.6, 0.6% aliquat-336 chloroform solution 10mL was added and the solution was vigorously shaked for about 30 seconds to form the ion-pair between Mo(VI)-ARS and aliquat-336 perfectly. The solution was stood for about 30 minutes. And the organic phase was taken for the absorbance measurement of the ion-pair at 520nm. The content of Mo(VI) was obtained from the standard calibration curve. Several extraction conditions such as pH, adding amounts of alizarin red S and aliquat-336, and shaking and standing times were optimized and the interferences and release of concomitant ions was also studied. This procedure was applied to the analysis of Eastern and Yellow seawaters. It could be confirmed from the recoveries of over 85% in samples spiked with a given amount of Mo(VI) that this method was also quantitative in the determination of trace Mo(VI) in a seawater.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.426-433
• /
• 1990

The conditions for immobilization of the partially purified ${\beta}-galactosidase$ form Bacillus subtilis HP4 and the properties of the immobilized enzyme have been investigated. The crude enzyme precipitated with cold acetone was purified about 68-fold through DEAE-cellulose and sephadex G-100 chromatography and its recovery was 19.9% The optimal conditions for Immobilization of enzyme were obtained in 2%(w/v) sodium alginate, 15%(v/v) enzyme solution and 2%(w/v) calcium chloride, and also the optimal stirring thme was 2 hours on the above conditions. The optimum temperature and pH values for immobilized enzyme were $55^{\circ}C$ and 6.5, respectively. Its residual activity was show 25% after heat treatment for an hour at $65^{\circ}C$, and found its high stability in pH 6.0 to 8.0. The enzyme activity was not affected b)· EDTA, 2-mercaptoethanol, KCN, protective agents, and other methal ions except Hg ion and Cu ion. The $K_m\;and\;V_{max}$ values of the immobilized enzyme on ONPG were $1.82{\times}10^{-2}M\;and\;3.57{\times}10^{-8}mole/min$, whereas those on lactose were $2.94{\times}10^{-2}M\;and\;1.68{\times}10^{-7} mole/min$, respectively. The remained enzyme activity for the immobilized enzyme was 95%t of original activity after storage of 40 days at $4^{\circ}C$, and when reused for 5 times was 81%. When skim milk(4.8% lactose) and 5% lactose solution were reacted with the immobilized enzyme(250 units/g) of lactose were 51% and 43%, respectively.

• Korean Journal of Microbiology
• /
• v.35 no.4
• /
• pp.315-321
• /
• 1999

This study has been performed to deveope a yeast strain having high ${\alpha}$-amylase production ability using nuclear transfer method. Hybrids formed between the strains of Saccharomyces fiburigera KCTC 7393 and Saccharomyces cerevisiae KCTC 7049 (tyr-, ura-)were obtained by nuclear transfer technique. Nuclei isolated from the wild type S. fiburigera strain were transfered into auxotrophic mutants S. cerevisiae and selected the hybrids showing an increased starch degrading capability were selected (MN-16). This transformant grew best and produced maximal ${\alpha}$-amylase activity on the medium containing 2% (V/V) soluble starch. ${\alpha}$-Amylase from MN-16 was purified electrophoretically homogenety and its properties were investigated. The enzyme was purified about 10.6 fold with an overall yield 9.7% from the culture medium by ammonium sulfate fractionation. DEAE-Sephacel column chromatography, and Sephacryl S-200 column chromatography. The purified enzyme showed a single band on SDS-polyacrylamide gel electrophoresis. The molecular weight of the ${\alpha}$-amylase was estimated to be 53,000 daltons by SDS-PAGE and by gel permeation chromatography on Sephacryl S-200. The purified enzyme showed the maximum activity at pH 5.5 and 40${\circ}C$. The km value for soluble starch was 2.5㎎/㎖. The enzyme activity increased in the presence of $Ca^{2+}, Co^{2+}, EDTA, Mg^{2+}, Mn^{2+}, Zn^{2+}$, but inhibited by $Cu^{2+}, Fe^{2+}$, and $Ni^{2+}$