• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.163-163
• /
• 2011

셀레늄(Selenium: Se) cracker cell을 이용하여 셀렌화한 $CuInSe_2$ (CIS)박막에 대해 연구한 결과를 발표하고자 한다. 화석연료의 과도한 사용으로 지구온난화라는 환경문제가 대두되면서 영구적이고 무상의 태양에너지 이용에 대한 필요성이 점차 높아지고 있다. 빛에너지를 전기에너지로 변화시키기 위한 태양전지는 재료에 따라 다양하게 개발되고 있으며 그 중 가장 주목을 받고 있는 것 중의 하나가 $CuInSe_2$을 광흡수층으로 하는 CIS 박막 태양전지이다. CIS 박막은 태양전지의 광흡수층으로 사용되는데 직접천이형 밴드구조를 가지고 있고, 약 $10^5$ $cm^{-1}$의 높은 광흡수계수를 가지고 있어 태양전지 광흡수층으로 적합한 물질로 각광받고 있다. CIS는 에너지 밴드갭이 ~1 eV로 실리콘과 유사한 밴드갭을 가지고 있으나 이는 Ga, Al을 In 대신 치환함으로 조절할 할 수 있다. 무엇보다도 sodalime 유리와 같은 저가의 기판위에 스퍼터와 같은 장치로 대면적 CIS 박막태양전지를 만들 수 있다는 것이 산업적인 면에서 장점으로 알려져 있다. 본 연구에서는 sodalime 유리기판 위에 스퍼터 방법으로 CIS 박막을 증착하고 Se cracker cell로 셀렌화하여 CIS 박막을 제조하는 것을 조사연구 하였다. 스퍼터를 이용하여 유리기판위에 Mo (Molybdenum)을 증착하고 그 위에 Cu-In-Se박막을 증착하였다. Cu-In-Se/Mo/유리기판 시료는 동일 챔버에서 Se cracker cell을 이용하여 셀렌화 처리 하였다. 물성비교를 위하여 Knudson-cell을 이용한 셀렌화도 시행하였다. Se cracker cell은 고체 Se를 가열하는 부분(R-zone)과 Se flux를 cracking 하는 부분(C-zone)으로 나누어져 있으며 C-zone은 700$^{\circ}C$로 고정하였다. 셀렌화 기판 온도는 425$^{\circ}C$로 고정하였고 Se cracker 온도는 330~375$^{\circ}C$까지 변화시켜 가며 CIS 박막을 제조하였다. 제조된 CIS 박막의 물성 조사는 사진, 현미경, SEM, EDX, XRD, Hall effects를 이용하였다. Se cracker cell로 셀렌화한 CIS 박막은 island 구조를 하고 있음을 알 수 있었다. CIS 박막의 island의 크기와 모양은 셀렌화시 R-zone 온도(Cu-In-Se 박막에 조사되는 셀레늄의 량)에 큰 영향을 받았다. 셀렌화시 셀레늄량이 적을 때는 island가 커지며 불균일해지고 셀레늄량이 많을 때 island가 작고 균일해지는 경향을 SEM을 통해 관찰할 수 있었다. X-ray 회절을 통해 셀레늄량이 적을 경우 CIS 결정이외의 결정이 박막내에 형성됨을 알 수 있었다. 학술회의에서 Se cracker cell을 이용한 셀렌화에 관한 보다 깊은 연구결과를 발표하고자 한다.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.2
• /
• pp.87-93
• /
• 2003

Growth and mineral composition of young radish in soil amended with sewage sludge (ISS) with or without liming were investigated. Levels of EC, T-N, and micronutrients were increased in the ISS treatment (50 Mg/ha) compared to the NPK treatment but those of available P and exchangeable cations were decreased. Chlorosis was appear on the young radish leaf at the ISS treatment, but this phytotoxic symptom was corrected with lime amendment (3 Mg/ha). Yields of young radish leaf and root in the combined treatment of ISS and lime were increased about 29 and 48%, respectively, compared with those in the ISS treatment. Contents of P, K, Ca, and Mg in young radish were higher in the combined treatment to ISS and lime, whereas those contents in the ISS treatment were lower than those in the NPK treatment. Contents of Cu, Zn, and Ni in soil and young radish leaf were positively correlated with total N content in young radish leaf, while contents of P, K, Ca, and Mg were negatively correlated. Contents of Cu, Zn, and Ni in leaf were negatively correlated with yield of young radish. Contents of Cu and Zn in leaf corresponding with a 5% yield reduction of young radish were 22.4 and 349 mg/kg, respectively.

• Solar Energy
• /
• v.13 no.1
• /
• pp.49-58
• /
• 1993

[ $CdS_{0.46}Se_{0.54}$ ] single crystal was grown by a sublimation method. The crystal structure and the temperature dependence of carrier density and mobility of $CdS_{0.46}Se_{0.54}$ single crystal were studied. Heterojunction solar cells of $n-CdS_{0.46}Se_{0.54}/p-Cu_{2-X}S_{0.46}Se_{0.54}$ were fabricated by the substitution reaction. The spectral response, the J-V characteristics and the conversion efficiency of the $n-CdS_{0.46}Se_{0.54}/p-Cu_{2-X}S_{0.46}Se_{0.54}$ heterojunction solar cells were studied. The open-circuit voltage, short-circuit density, fill factor and conversion efficiency of $n-CdS_{0.46}Se_{0.54}/p-Cu_{2-X}S_{0.46}Se_{0.54}$ heterojunction solar cells under $80mW/cm^2$ illumination were found to be 0.48V, $21mA/cm^2$, 0.75 and 9.5%, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.121-121
• /
• 2017

본 연구는 비전도성 폴리머 표면을 개질하여 감광성 금속을 유전체 표면에 흡착시키고, 감광성 금속의 광화학 반응을 이용하여 귀금속 촉매를 비전도성 폴리머 표면에 선택적으로 흡착시켜 무전해 Cu 도금을 수행하여 금속패턴을 형성하였다. 기능성 유연 필름은 일반적으로 투명한 플라스틱 고분자 기판을 기반으로 전기 전자, 에너지, 자동차, 포장, 의료 등 다양한 분야에서 폭넓게 활용 되고 있으며, 본 연구에서는 습식 도금 공정을 이용하여 폴리이미드 필름상에 $10{\mu}m$ 이하의 미세패턴을 형성하기 위한 공정을 개발하고자 하였다. 비전도성 폴리머 표면에 무전해 도금을 위해서 우선 폴리머 필름의 표면을 개질하는 공정이 필요하다. 이에 KOH 또는 NaOH 알카리 용액을 이용하여 표면을 개질하였으며 개질된 표면에 감광성 금속이온의 흡착시키기 위한 감광성 금속이온은 주석을 사용하였으며, 주석 용액의 안정성 및 퍼짐성 향상을 위해 감광성 금속 용액의 제조 및 특성을 관찰하였으며, 감광성 금속화합물이 흡착된 비전도성 유전체 표면을 포토마스크를 이용하여 특정 부위, 즉 표면에 금속패턴 층을 형성하고자 하는 곳은 포토마스크를 이용하여 광원을 차단하고 그 외 부분은 주 파장이 365nm와 405nm 광원을 조사하여 선택적으로 감광성 금속화합물의 산화반응을 유도하는 광조사 공정을 수행하였다. 광원이 조사되지 않은 부분에 귀금속 등의 촉매 입자를 치환 흡착시켜 금속 패턴이 형성될 수 있는 표면을 형성하였다. 위의 활성화 공정이후에 활성화 처리된 표면을 세척하는 수세 공정을 거친 후 무전해 도금공정에 바로 적용할 경우 미세한 귀금속 입자가 패턴이 아닌 부분 즉 자외선(UV) 조사된 부분에도 남아있어 도금시 번짐 현상이 발생한다. 이에 본 연구에서는 활성화 처리 후 약 알칼리 용액에 카르복실산을 혼합하여 잔존하는 귀금속 입자를 제거한 후 무전해 Cu 도금액을 이용하여 $10{\mu}m$ 이하의 Cu 금속 패턴을 형성하였다.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.440-447
• /
• 1998

Polydentate Schiff base ligands 5-Br-BSDT(bis(5-bromosalicylaldehyde)diethylenetriamine) having $N_3O_2$ atoms, 5-Br-BSTT(bis(5-bromosalicylaldehyde)triethylenetetramine) having $N_3O_2$ atoms, 5-Br-BSTP(bis(5-bromosalicylaldehyde)tetraethylenepentamine) having $N_3O_2$ atoms were synthesized. Stability constants of the complexes between these ligands and the metal ions such as Cu(II), Ni(II) and Zn(II) were measured in DMSO by a polarographic method. It was observed that all metal(II) ions employed in this study formed 1 : 1 complexes with Schiff base ligands. Stability constants for the ligands were in the order of Cu(II)>Ni(II)>Zn(II), and for complex formation were in the order of 5-Br-BSTP>5-Br-BSTT>5-Br-BSDT according to the increasing in the number of donor atoms. Both enthalpy and entropy changes are obtained in negative valves. Exothermicity for the complex formation indicated tight binding between the ligands and metal ions. The negative entropy change would be related to the fact that solvent molecules are strongly interacting with the metal complexes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.393-398
• /
• 2012

We investigated the changes in chemical properties of paddy field soils at 300 different sampling sites containing 4 topography in Jeonbuk province, Korea. The soil samples were collected 43.0% from local valley and fans, 39.3% from fluvio-marine deposits, 15.0% from alluvial plains, and 2.7% from diluvium sites. The optimal values of soil properties in the total soil samples were as follows: 65.3% of total samples in soil pH value, 48.3% of total samples in cation exchange capacity (CEC) value, and 22.3% of total samples in available phosphorus content, whereas the deficient values of soil properties were 63.3% of total samples in soil organic matter (SOM) content, 75.7% of total samples in available silicate content, and 61.3%, 51.0%, and 59.3% of total samples in exchangeable $K^+$, $Ca^{2+}$, and $Mg^{2+}$ concentrations, respectively. There were different soil types in the paddy fields: that is, 34.4% immature paddy and 33.6% sandy paddy in the local valley and fans, 57.8% sandy paddy in the alluvial plains, 47.4% normal paddy in the fluvio-marine deposits, and 75.7% immature paddy in the diluvium. Soil textures were also different: 53.5% loam in the local valley and fans, 37.8% sandy loam in the alluvial plains, and 55.1% silty loam in the fluvio-marine deposits. Soil pH and SOM contents were not different among the different topographical sampling sites. However, the mean value of available phosphorus content, 224 mg $kg^{-1}$, was exceeded optimal values in the diluvium. The contents of exchangeable cations were optimal in all the sites, except exchangeable $Ca^{2+}$ contents in the local valley and fans. The contents of available silicate ranged between 112 and 127 mg $kg^{-1}$ in all the sites, which were lower than optimal value. In addition, soil pH values were proportionally correlated to the order of available silicate, exchangeable $Ca^{2+}$, $Mg^{2+}$, $Na^+$, CEC, and exchangeable $K^+$. The contents of SOM were proportionally correlated to the order of CEC, available $P_2O_5$, exchangeable $Ca^{2+}$, and available silicate. The contents of heavy metals, Cd, Cr, Cu, Ni, Pb, and Zn, were only 10% of the threshold levels of the metals, and As content was about 20 to 30% of the threshold level.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.142-150
• /
• 1994

To investigate differences in Cd and Zn contents of paddy soils and rice plants polluted by the municipal and industrial waste water in the Mangyeong River Area, soil and plant samples were collected at several distances from the main inlet and at different depths of the soil. Soil samples were extracted with $4M-HNO_3$ and plant samples were digested with a mixture of $HNO_3$and $HClO_4$for analyzing heavy metals by atomic absorption spectrophotometry. The contents of Cd and Zn in soils ranged from 0.38 to 1.17 and from 33.8 to 464.6mg kg^{-1}, respectively. The average Cd level in 1990 was less than that in 1982, but the Zn level in 1990 was higher than that in 1982 in general. No variation in Cd contents was observed in soils at the different distances from the source of waste water, but Zn contents in soils were lower with the increasing distances from the source of waste water. A significant correlation was observed among Cd content, OM, available silicate, CEC and $Ca^{++}$. Similar results existed among Zn content of 1982, OM and $Ca^{++}$. The Cd content in subsurface soils of 1992 was significantly correlated with Zn, Cu, and Pb in soils, and the Zn content in soils was significantly correlated with the Cu and Pb in soils, regardless of years. The Cd content in leaf blades of rice was more than seven times higher than that in brown rice. The Zn content in rice was higher than that in leaf blades and in panicle axis. The Cd content in panicle axis and the Zn content in all parts of rice were correlated with Zn, Cu and Pb contents in soils. The Cd and Zn contents in brown rice ranged from 0.10 to 0.90mg $kg^{-1}$ and from 4.2 to 95.9mg $kg^{-1}$ in the Mangyeong River Area, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.178-180
• /
• 2005

In this study, in order to develop multilayer low temperature sintering piezoelectric transformer, $Pb_{0.97}Sr_{0.03}[(Mn_{1/3}Nb_{2/3})x(Zr_{0.48}Ti_{0.52})_{1-x}O_3]+$ 0.25wt% $CeO_2$+0.3 wt% $Nb_2O_5$ system ceramics were fabricated using $Li_2CO_3-CaCO_3$ and CuO as sintering aids and their piezoelectric and dielectric characteristics were investigated with the amount of PMN substitution. With increasing PMN substitution, electromechanical coupling factor kp and dielectric constant were increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.124-128
• /
• 2000

The high Tc phase disappeared and low Tc phase increased in the substitution of transition elements for Bi ions. The high Tc phase decreased in the substitution of Si and Sn for Bi ions. The high Tc phase increased in the substitution of Sb, As and P which were the same group of Bi for Bi ions. The substitution of P ions was the most effective and then the high Tc phase was formed in large quantity by replacing Bi ions with 30% of P ions.

• Journal of Korean Society of Forest Science
• /
• v.84 no.3
• /
• pp.286-298
• /
• 1995

This study was carried out to investigate the effect of forest soil acidification on the distribution of exchangeable cations($Ca^{2+}$, $Mg^{2+}$, $Al^{3+}$) and heavy metals(Cu, Zn, Mn, Pb, Cd) in soil, and to understand the relation of the soil chemical properties and the distribution of nutrients and hear metals in fine root and foliage. The results through survey on the long - term change of soil pH and the contents of nutrient and heavy metal in soil, fine root and foliage by 2 sites near Ulsan - Onsan industrial estate and 2 sites in limited development district are summarized as follows : 1. The average forest soil pH(A horizon) in Ulsan had been proceeded down to 3.73 in deciduous forest and 3.86 in coniferous forest in 1994 from 4.45 and 4.78 in 1987, respectively, which indicated serious soil acidification. As comparing soil pH among sites, Dongcheon coniferous forest(pH 4.57) in limited development district showed the highest values and Dangwol deciduous forest(pH 3.19) near Onsan industrial estate showed the lowest values in 1994. 2. Contents of exchangeable calcium in forest soils of limited development district where showed much higher soil pH than industrial estate were 3.5 times more in deciduous forest soil and 11 times more in coniferous forest soil than in industrial estate, and contents of exchangeable magnesium were also 4.5 and 5 times more in limited development district than in industrial estate, respectively. However contents of exchangeable aluminium which had been supposed more in forest soil of industrial estate were more in limited development district. 3. Contents of calcium and magnesium in fine root of deciduous trees(A hirsuta. Q. acutissima) were 3.6 and 1.7 times more in limited development district than in industrial estate, respectively, and those of coniferous trees(P. rigida, P. thunbergii) were 4.6 and 1.5 times more in Limited development district than in industrial estate, respectively. Also contents of calcium and magnesium in foliage of deciduous trees were 1.1 and 2.2 times more in limited development district than in industrial estate, respectively, and those of coniferous trees were 1.8 and 3.3 times more in limited development district, respectively. And contents of aluminium in fine root and foliage were nearly as same as in soil. 4. Ca/Al molar ratios in soil and fine root, which could be related with the dgree of soil acidification and Al toxicity on trees, were Less than 1 in all sites except Dongcheon, suggesting that the soil and fine root in the sites have high sensitivity to soil acidification and the decrease in nutrient uptake and root enlargement. The Ca/Al molar ratios in soil and fine root in coniferous forest were highly correlated with the soil pH one another. 5. Contents of Cu, Zn and Pb in soil, fine root and foliage were more in industrial estate than in limited development district in both deciduous and coniferous forests, however, oppositely contents of Mn and Cd in soil were more in limited development district than in industrial estate.