• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.356-364
• /
• 1997

In order to study effects of Cu and Be on the microstructure and tensile properties of rapidly solidified Al-Mg alloys, Al-Mg-Cu-Be alloys have been rapidly solidified by inert gas atomization process. Microstructure of rapidly solidified Al-Mg-Cu-Be powders exhibited refinement and good dispersion of Be particles as increasing of solidification rate. Solidification rate of atomized powders was estimated to be about $5{\times}10^{3{\circ}}C/s$. Inert gas atomized Al-Mg-Cu-Be powders were hot-processed by vacuum hot pressing at $450^{\circ}C$ under 100 MPa and hot extruded with reduction ratio in area of 25: 1 at $450^{\circ}C$. The extruded Al-Mg-Cu-Be powders consisted of recrystallized fine Al grains and homogeneously dispersed fine Be particles, and exhibited improved tensile properties with increase in Cu content. $Al_2CuMg$ compounds precipitated in grain and grain boundaries of Al-Mg-Cu-Be alloys with aging heat treatment after solution treatment. Hardness and tensile properties were improved by increasing Cu content and Be addition. Compared with extruded Al-Mg-Cu powders, the extruded Al-Mg-Cu-Be powders exhibited finer recrystallized grains and improved tensile properties by dispersion hardening of Be and subgrain boundaries pinned by fine Be particles. After aging treatment, hardness and tensile properties were improved due to restricted precipitation by increasing of dislocation density around Be particles in matrix.

• Journal of Korea Foundry Society
• /
• v.30 no.4
• /
• pp.137-141
• /
• 2010

The effects of Zn amounts on the castability and tensile properties of Al-Zn-Mg-Cu alloys were investigated for development of high strength die casting aluminium alloys. Al-Zn-Mg-Cu alloys with 3.5% Zn showed high cast cracking tendency and poor mold filling behaviour. Al-Zn-Mg-Cu alloys with 5wt% Zn and 7wt% Zn had the tensile strengths of 300~400MPa and the elongations of 2~18%. The effect of Zn on the tensile strength of Al-Zn-Mg-Cu alloys was insignificant, but Al-Zn-Mg-Cu alloy with high Zn amount had lower elongation.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.950-951
• /
• 2006

[ $Mg_{55}Y_{15}Cu_{30}$ ] metallic glass powders were prepared by the mechanical alloying of pure Mg, Y, and Cu after 10 h of milling. The thermal stability of these $Mg_{55}Y_{15}Cu_{30}$ amorphous powders was investigated using the differential scanning calorimeter (DSC). $T_g$, $T_x$, and ${\Delta}T_x$ are 442 K, 478 K, and 36 K, respectively. The as-milled $Mg_{55}Y_{15}Cu_{30}$ powders were then consolidated by vacuum hot pressing into disk compacts with a diameter and thickness of 10 mm and 1 mm, respectively. This yielded bulk $Mg_{55}Y_{15}Cu_{30}$ metallic glass with nanocrystalline precipitates homogeneously embedded in a highly dense glassy matrix. The pressure applied during consolidation can enhance thermal stability and prolong the existence of amorphous phase within $Mg_{55}Y_{15}Cu_{30}$ powders.

• Korean Journal of Materials Research
• /
• v.13 no.6
• /
• pp.365-368
• /
• 2003

Small amounts of additives such as mol % 0.13 NiO and mol % 0.01 $CaCO_3$were added to Cu-Zn-Mg ferrites. Basic composition of the Cu-Zn-Mg ferrites was $Cu_{Cu}$X/$Fe_{0.054}$ /$Zn_{0.486}$$Mg_{0.407}$ $Fe_{1.946}$ $O_4$(group A) and $Cu_{0.263}$$Fe_{0.027}$ $Zn_{0.503}$ $Mg_{0.262}$ $Fe_{1.973}$ $O_4$(group B). Specimens were sintered at different temperatures (1010, 1030, $1050^{\circ}C$) for 2 hours in air followed by an air cooling. Then, effects of various composition and sintering temperatures on the microstructure and the magnetic properties such as inductions, coercive forces, and initial permeabilities of the Cu-Zn-Mg ferrites were investigated. The average grain size increased with the increase of sintering temperature. The magnetic properties obtained from the aforementioned Cu-Zn-Mg ferrite specimens were 1,724 gauss for the maximum induction, 1.0 oersted for the coercive force, and 802 for the initial permeability. These magnetic properties indicated that the specimens could be utilized as the core of IFT (intermediate frequency transformer) and antenna in the amplitude modulation.

• Journal of Korea Foundry Society
• /
• v.34 no.4
• /
• pp.130-135
• /
• 2014

Efforts have been made to develop new silicon-free aluminum casting alloys that possess high electrical and thermal conductivity. In this research Al-Fe-Cu-Mg alloys with various Cu and Mg contents were investigated for their various properties. As the Cu or Mg content was increased, the electrical conductivity gradually decreased, while the tensile strength of the Al-Fe-Cu-Mg alloy tended to be improved. It was found that fluidity was generally inversely proportional to the Cu content, but the alloys containing 1%Mg showed considerably low fluidity, regardless of the Cu content.

• Economic and Environmental Geology
• /
• v.37 no.3
• /
• pp.335-345
• /
• 2004

Total and extractable contents of heavy metals were measured in sediment and seafood from Bukhang and Boggil-ri tidal flats along the Mokpo coastal area, south-western part of Korean peninsular in order to assess the degree of metal pollution, metal bioavailability and metal hioaccumulation. The metal concentrations, except Pb were found to be greater than the background concentrations of sediments indicating the progress of cumulative contamination by anthropogenic origin of metals. The order of extractable metal concentrations in sediments were Mn(32-53 mg/kg)＞Zn(14-42 mg/tg)＞Cu(2.5-17.0 mg/kg)＞Pb(2.4-6.8 mg/kg)＞Cd(0.5-0.7 mg/kg). However, the amount of metals associated with extractable fraction of sediments were significantly high in Bukhang relative to Boggil-ri. Significant bioaccumulation of all metals, except Pb were observed in seaweed and benthos. The order of bioaccumulation of metals were: in concentration; all biota commonly, Mn(129-374 mg/kg)＞Zn(19-106 mg/kg)＞Cu(6-87 mg/kg)＞Cd(4.6-7.6 mg/kg)＞Pb(0.2-3.7 mg/kg), in BCF; Enteromorpha, Cd＞Mn＞Cu＞Zn＞Pb, Ilyoplax deschampsi, Cu＞Cd＞Mn＞Zn＞Pb, Urechis unicinctus, Cd＞Zn＞Mn＞Cu＞Pb. Some metal concentrations of Enteromorpha, especially Cu, Zn, weakly Pb in bukhang, Mn, Cd in boggili-ri, were correlate well with concentrations in sediment, indicating relatively more contaminated by the anthropogenic origin of metals in each tidal flat. The results clearly indicate that the seafood of bukhang, even of Boggili-ri known as clean area, are contaminated with metals.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.97-97
• /
• 2017

This study investigated the corrosion protection by electrodeposited copper layer on AZ31 Mg alloy with and without additional silver layer by immersion test, salt spray test, OCP transient and potentiodynamic polarization experiment. The single electrodeposited Cu layer on AZ31 Mg alloy showed a nodular structure with many imperfections of crevices between the nodules, which resulted in the fast initiation of pitting corrosion within first few hours of immersion. Double-layer coating of Cu and outer Ag layer slightly increased the initiation time for pitting corrosion. Triple-layer coatings of Cu/Ag/Cu exhibited the most efficient corrosion protection of AZ31 Mg alloy, compared to the single- and double-layer coatings. Surface morphology of the outer Cu layer in the triple-layer was changed from the nodular structure to fine particle structure with no crevices due to the presence of an additional Ag layer. Thus, the improved corrosion resistance of AZ31 Mg alloy by electrodeposited Cu/Ag or Cu/Ag/Cu layers is readily ascribed to the decreased number of imperfections in the electrodeposited layers due to the additional silver layer. It is concluded that the additional silver layer provides many nucleation sites for the second Cu plating, resulting in the formation of finer and denser structure than the first Cu electrodeposit.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.583-592
• /
• 2005

This experiment was conducted to determine the effects of dietary copper levels on performance, carcass characteristics, and economical analysis in Hanwoo steers. Fifteen Hanwoo steers weighing about 300kg were randomly allotted into one of three treatments. The three treatments consisted of Control(7mg Cu/kg feed), TI(12mg Cu/kg feed) and TII(17mg Cu/kg feed). Copper was formulated with concentrate from copper sulfate($CuSO_4$) and animals were fed the diets supplemented with copper from 300kg untill about 630 kg of body weight. Dietary copper levels did not affect daily weight gain, feed intake and feed efficiency during the whole feeding period. Dressing percentage, rib eye area and backfat thickness were not different between animals fed the diets supplemented with copper. Animals fed the diets supplemented with copper received the same B grade in yield grade. Animals fed the diets supplemented with copper received same marbling score. Beef color, fat color, texture and maturity were not affected by Cu supplementation in diet. Animals received the same first grade between treatments in quality grade. Animals fed the diet supplemented with 12mg of copper per kg diet was higher in profit by 13.3% than animals fed the control diet. According to these results, it may be concluded that performance, yield and quality grade were not affected by the Cu levels of 7 to 17mg per kg feed but crude income was enhanced when Hanwoo steers were fed the diet containing 12mg Cu/kg feed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.412-420
• /
• 1999

A controlled column study using elution development and miscible displacement was conducted to assess heavy metal transport characteristics in sludge-untreated soil ("Control"), soil treated with an equivalent of sludge 50 and 100 dry ton $ha^{-1}$ ("Soil-Sludge mixtures"), and sewage sludge ("Sludge"). The elution curves (ECs) and the breakthrough curves (BTCs) for Cd, Cu and Zn in sludge 50 and 100 dry ton $ha^{-1}$ treated soils are not different from the sludge-untreated soil, The ECs for Cd, Cu and Zn in soil column which received a pulse of 10 mg of each Cd, Cu and Zn were similar to those of Cd, Cu and Zn in soil column which had no Cd, Cu and Zn added, but were very different with the ECs for Cd, Cu and Zn in soil column which received a pulse of Cd, Cu and Zn containing 50 mg of each metal. On the other hand, the BTCs for Cd, Cu and Zn in soil columns that were eluted with 500 and $1000mg\;L^{-1}$ of mixed solution of Cd, Cu and Zn were similar to each other, but were distinctly different with the BTCs for Cd, Cu and Zn in soil column that was eluted with $100mg\;L^{-1}$ mixed solution of Cd, Cu and Zn. Sewage sludge applied at rates of 50 and 100 dry ton $ha^{-1}$ did not affect the transport characteristics of this calcareous soil. The apparent mobility for this sludge treated soil and sludge is: Cd >Zn>Cu. The transport characteristics of Cd and Zn are similar to each other, but are different from those of Cu.

• Korean Journal of Microbiology
• /
• v.42 no.4
• /
• pp.326-331
• /
• 2006

In the present study, we examined biosorption characteristics of heavy metals onto the extracellular polysaccharide (EPS) produced by the purple nonsulfur photosynthetic bacteria Rhodopseudomonas sp. KH4, which was isolated from a stream in Anyang, Kyonggi-Do. When Cd (100 mg/L) and Cu (100 mg/L) were added to EPS (1.0 g/L) in the optimal condition (Cd; pH 8, Cu; pH 5, $40^{\circ}C$), 84.2 mg/L of Cd and 70.0 mg/L of Cu were adsorbed within 30 min and 10 min, respectively. When 100 mg/L of Cd and Cu were present as mixture, 16.8 mg/L of Cd and 48.7 mg/L of Cu were adsorbed at $25^{\circ}C$, pH 5. The maximum adsorption capacity determined by fitting Langmuir isotherms model was suitable for describing the biosorption of Cd (76.9 mg/g) and Cu (67.1 mg/g) by EPS. The neutral monosaccharide in the EPS determined by GC consisted of arabinose (2.4%), glucose (7.1%) and mannose (90.5%).