• Archives of Metallurgy and Materials
• /
• v.66 no.3
• /
• pp.699-702
• /
• 2021

Effect of Cu addition on oxide growth of Al-7 mass%Mg alloy at high temperature was investigated. As-cast microstructures of Al-7 mass%Mg and Al-7 mass%Mg-1 mass%Cu alloys showed α-Al dendrites and area of secondary particles. The 1 mass%Cu addition into Al-7 mass%Mg alloy formed Mg₃₂(Al, Cu)₄₉ ternary phase with β-Al₃Mg₂. The total fraction of two Mg-containing phases in Cu-added alloy was higher than the β-Al₃Mg₂ fraction in Cu-free alloy. From measured weight gains depending on time at 500℃ under an air atmosphere, it was shown that all samples exhibited significant weight gains depending on time. Al-7mass%Mg-1mass%Cu alloy showed the relatively increased oxidation rate when compared with Cu-free alloy. All the oxidized cross-sections throughout the entire oxidation time showed coarse and dark areas regarded as oxides grown from the surface to inside, but bigger oxidized areas were formed in the Al-7mass%Mg-1mass%Cu alloy containing higher fraction of Mg-based phases in the as-cast microstructure. As a result of compositional analysis on the oxide clusters, it was found that the oxide clusters contained Mg-based oxides formed through internal oxidation during a long time exposure to oxidizing environments.

• Journal of the Korean Applied Science and Technology
• /
• v.9 no.2
• /
• pp.165-174
• /
• 1992

The standardized activated sludge for the biodegradation test of anion surfactants has been produced from the collected microorganisms in the soil and the wastewaters treatment plant. The activated sludge was kept under control of the pH, dissolved oxygen, microorganisms and inoculated the basal medium flasks with LAS and LAS mixed with heavy metals [Cd(II), Cu(II), Zn(II)]. Based of results, the inhibition effect(%) of heavy metals in LAS biodegradation were 1. All 1% when LAS 30mg/l-Cd(II), Cu(II) and Zn(II) 0.1mg/l, respectively 2. All 1${\sim}$10% when LAS 30mg/l-Cd(II), Cu(II) and Zn(II) 1mg/l, respectively 3. All 10${\sim}$40% when LAS 30mg/l-Cd(II), Cu(II) and Zn(II) 10mg/l, respectively 4. All 30${\sim}$65% when LAS 30mg/l-Cd(II), Cu(II) and Zn(II) 100mg/l, respectively And toxicity order of heavy metals to the microorganisms in LAS biodegradation were Cd>Cu>Zn in low concentration(0.1${\sim}$1mg/l)and Cd>Zn>Cu in high concentration(10${\sim}$100mg/l).

• Journal of Korea Foundry Society
• /
• v.34 no.3
• /
• pp.100-106
• /
• 2014

In recent years, Mg and its alloys have attracted a great deal of attention due to their low density, relatively excellent castability, and straightforward recyclability. Mg alloys have been widely applied to various industrial fields, and are representatively used in automotive and electronic parts. According to previous researches, the electrical conductivity of Mg alloys greatly decreases with increasing Al content. However, with the addition of Zn and/or Cu, the electrical conductivity of Mg alloys is maintained or slightly increased, and improved mechanical properties are obtained as well. On this basis, Mg-Zn-Cu alloys have been investigated in the present study with a focus on the effect of adding Zn and Cu on the electrical conductivity. The Zn and Cu contents ranged from 4 to 6wt.% and 0 to 1.5wt.%, respectively. Ternary Mg-Zn-Cu alloys have been prepared by gravity casting in a steel mold. In the as-casting condition, the electrical conductivity of Mg-Zn-Cu alloys showed a linear increasing trend with decreasing Zn and increasing Cu contents. Furthermore, impact values of Zn = -1.5 and Cu = 2.5 were determined for these alloys by electrical conductivity tests.

• Journal of Animal Science and Technology
• /
• v.64 no.5
• /
• pp.885-896
• /
• 2022

This experiment was conducted to investigate the effects of three different copper (Cu) sources (one inorganic and two organics) and levels (0, 50, and 100 mg/kg) on the growth performance, Cu digestibility, fecal mineral excretion, serum mineral concentration, jejunal morphology, and serum biochemical profile of growing pigs. A total of 42 male, growing pigs (31.08 ± 1.82 kg) were randomly assigned to seven treatments consisting of one negative control (0 mg/kg of added Cu level) and treatments with copper sulfate (CuSO4), Cu-amino acid complex (CuAA), and Cu-hydroxy-4-methylthio butanoate chelate complex (CuHMB) at 50 and 100 mg/kg each for 28 d. Pigs fed 50 or 100 mg/kg of Cu showed improved (p < 0.05) average daily gain and feed intake. Although Cu excretion decreased (p < 0.01) in pigs fed 100 mg/kg of organic Cu sources compared to those fed CuSO4, there was no difference between the Cu sources in pigs fed 50 mg/kg. However, the apparent total tract digestibility of Cu increased (p < 0.01) in pigs fed organic Cu sources compared with that in pigs fed CuSO4. The addition of CuHMB increased (p < 0.01) serum phosphorus and sulfur concentrations; however, there were no effects of source and level on jejunal morphology and serum biochemical profile. These results suggest that the inclusion (50 mg/kg) of organic Cu sources (CuAA and CuHMB) in the growing pig diet could be beneficial for growth performance and Cu availability and may reduce environmental pollution.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.965-973
• /
• 2014

Three studies were conducted to investigate whether a chelated Cu can replace $CuSO_4$ as a growth promoter in pigs. In Exp. 1, a total of 240 piglets (Large White${\times}$Landrace, $7.36{\pm}0.10kg$) were randomly allocated to 1 of 3 treatments with 8 replicates and 10 piglets per pen. Treatments included a NRC control ($CuSO_4$, 6 mg/kg), two Cu supplementations from either $CuSO_4$ or $Cu(HMTBa)_2$ at 170 mg/kg. Pigs fed $Cu(HMTBa)_2$ were 6.0% heavier than pigs fed either the NRC control or 170 mg/kg $CuSO_4$ (p = 0.03) at the end of the experiment. During the 42 days of experimental period, pigs fed $Cu(HMTBa)_2$ gained 9.0% more (p = 0.01), tended to eat more feed (p = 0.09), and had better feed efficiency (p = 0.06) than those fed $CuSO_4$. Compared with the 6 mg/kg $CuSO_4$ NRC control, liver Cu was increased 2.7 times with 170 mg/kg $CuSO_4$ supplementation, and was further increased with $Cu(HMTBa)_2$ (4.5 times, p<0.05). In Exp. 2, a total of 616 crossbred piglets (PIC, $5.01{\pm}0.25kg$) were randomly allocated to 1 of 4 treatments with 7 replicates and 22 piglets per pen. Treatments included a NRC control (from $CuSO_4$), and three pharmaceutical levels of Cu (150 mg/kg) supplemented either from C$CuSO_4$, tri-basic copper chloride ($Cu_2[OH]_3C1$), or $Cu(HMTBa)_2$. Pigs fed $CuSO_4$ or $Cu(HMTBa)_2$ had better feed efficiency (p = 0.01) and tended to gain more (p = 0.08) compared with those fed the NRC control. Pigs fed $Cu_2[OH]_2C1$ were intermediate. Pigs fed $Cu(HMTBa)_2$ had the highest liver Cu, which was significantly higher than those fed ($Cu_2[OH]_3C1$) or the negative control (p = 0.01). In Exp. 3, a total of 1,048 pigs (PIC, $32.36{\pm}0.29kg$) were allotted to 6 treatments with 8 replicates per treatment and 20 to 22 pigs per pen. The treatments included a NRC control with 4 mg/kg Cu from $CuSO_4$, a positive control with 160 mg/kg Cu from $CuSO_4$, and incremental levels of $Cu(HMTBa)_2$ at 20, 40, 80, and 160 mg/kg. During the overall experimental period of 100 days, no benefit from 160 mg/kg $CuSO_4$ was observed. Pigs fed $Cu(HMTBa)_2$ had increased ADG (linear and quadratic, $p{\leq}0.05$) and feed efficiency (linear and quadratic, $p{\leq}0.05$) up to 80 mg/kg and no further improvement was observed at 160 mg/kg for the whole experimental period. Pigs fed 80 mg/kg $Cu(HMTBa)_2$ weighed 1.8 kg more (p = 0.07) and were 2.3 kg heavier in carcass (p<0.01) compared with pigs fed 160 mg/kg $CuSO_4$. In addition, loin depth was increased with increased $Cu(HMTBa)_2$ supplementation with pigs fed 80 mg/kg $Cu(HMTBa)_2$ had the greatest loin depth (p<0.05). In summary, $Cu(HMTBa)_2$ can be used to replace high $CuSO_4$ as a growth promoter in nursery and grower-finisher pigs.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.234-240
• /
• 2001

The diffusion barrier properties of TiN by using Cu(Mg) alloy film have been investigated. Cu(Mg) alloy film was deposited on air-exposed TiN film. Upon annealing, interfacial MgO of 100 $\AA$ has been formed due to the reaction of Mg with oxygen existed on the surface of TiN. Combined MgO/TiN structure prevented the interdiffusion of Cu and Si up to $800^{\circ}C$. To improve the adhesion of Cu(Mg) alloy film to the TiN, TiN layer was treated by $O_2$ plasma, followed by vacuum annealing at $300^{\circ}C$. It was found that increased oxygen on the surface of TiN film by plasma treatment enhanced segregation of Mg toward the interface, resulting in the formation of dense MgO layer. Improved adhesion characteristics have been formed through this treatment. However, increased power of $O_2$ plasma led to the formation of TiO$_2$ and decreased the Mg content to be segregated to the interface, resulting in the decrease in adhesion property. In addition, the deposition of 50 ${\AA}$ Si on the TiN enhanced the adhesion of Cu(Mg) alloy to TiN without deteriorating the TiN diffusion barrier characteristics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.1124-1130
• /
• 1999

The purpose of this study was to investigate the effect of copper supplementation on mineral utilizations in rats. Intakes, excretions, and tissue levels of Fe, Zn, Cu, Ca, Mg, Na, K were compared in rats fed diet with 100, 200, 400% of copper requirement(1Cu, 2Cu and 4Cu, respectively) for 6 weeks. The feed intake was significantly higher in 2Cu compared to 1Cu group, however, body weight gain was not significantly different among the three groups. While the serum level of Fe was significantly decreased, that of Cu was significantly elevated by Cu supplementation. The liver and kidney levels of Mg and Na, intakes of all the minerals, urinary excretions of Fe, Cu, Ca and Mg were significantly higher in 2Cu and/or 4Cu compared to 1Cu. The fecal excretions, retentions and absorptions of all the minerals were not affected by Cu supple mentation. In summary, these results suggest that dietary Cu supplementation has no effect on mineral utilizations, but effect on distribution in tissues of rats.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.682-689
• /
• 1995

In order to refine the grain size of Mg-Zn alloy 0.5 to 6wt.%Cu or Si elements were added. Alloy ingot was made under vacuum atmosphere of 4 ${\times}$ 10$\^$-4/ Torr in the quartz tube coated by BN. Grain size and hardness were measured after solution treatment for 8 hours at 435$^{\circ}C$. Optimal condition for grain size refining effect was obtained at the minimum composition of 2wt.%Cu or 1.5wt.%Si addition to Mg-6wt%Zn alloy. Age hardening behavior was experimented at the optimal compositions of the Mg-6wt.%Zn, Mg-6wt.% Zn-2wt.%Cu and Mg-6wt.% Zn-1.5wt.%Si. The hardness increment due to fine grain size was higher at the Mg-Zn-Cu alloy system, but that due to age hardening was higher at the Mg-Zn-Si alloy system.

• Journal of Environmental Health Sciences
• /
• v.21 no.2
• /
• pp.27-35
• /
• 1995

In order to investigate acute toxicity and bioconcentration of heavy metals for a freshwater fish, the fish used in this experiment was goldfish, Carassius auratus. Each ten goldfish was accommonidated in a water and was treated with different concentration of Pb and Cu compound. The 24 $hr-LC_{50}$ was obtained by plotting on the log-normal distribution graph. Furthermore, the combined effect of Pb and Cu was also investigated the fish was treated with Pb or Cu compound only, and Pb and Cu compound together, respectively. These results were summarized as follows: 1. The 24 $hr-LC_{50}'s$ of Pb and Cu were 7.48 mg/l and 0.666 mg/l, respectively. 2. When single or/and combined treatment with Pb(7.0 mg/l) or/and Cu(0.6 mg/l) to Carassius auratus for 24 hours were performed, there was significant difference between the single or/and the combined treatment in their bioaccumulated Cu concentrations. Cu concentrations in goldfish were higher in the combined treatment than in the single treatment. 3. When Carassius auratus was exposed to 0.748 mg/l (1/10 of 24 $hr-LC_{50}$) and 1.496 mg/l of Pb (1/5 of 24 $hr-LC_{50}$) for 7 days, the bioconcentration factors (BCF) were 79.14 and 100.11 for Pb, respectively. The BCF of Pb was obtained as a linearity according to the concentration and exposure time as follows log BCF=1.014 log $P\cdot T$+1.011 ($r^2$=0.9041) where, P: pollutant concentration(mg/l) T: exposure time(day) 4. When Carassius auratus was pxposed to 0.0666 mg/l (1/10 of 24 $hr-LC_{50}$) and 0.1332 mg/l of Cu (1/5 of 24 $hr-LC_{50}$) for 7 days, the bioconcentration factors (BCF) were 55.42 and 63.24 for Cu respectively. The BCF of Cu was obtained as a linearity according to the concentration and exposure time as follows log BCF=0.571 log $P\cdot T$+1.823 ($r^2$=0.8974) where, P: polutant concentration(mg/l) T: exposure time(day)

• Journal of Korea Foundry Society
• /
• v.35 no.4
• /
• pp.67-74
• /
• 2015

In this study, Mg-Zn alloys are investigated in terms of their thermal properties after an addition of Cu. Al element is added to improve the mechanical properties and castability in general case. However, it was excluded here because it significantly decreases the thermal conductivity. On the other hand, Zn was added as a major element, which had less influence on reducing the conductivity and can complement the mechanical properties as well. Cu was also added, and it improved the heat transfer characteristics as the amount was increased. The composition ranges of Zn and Cu are 6 wt.% and 0~1.5 wt.%, respectively. Mg-6Zn-xCu alloy was prepared by a gravity casting method using a steel mold and then the thermal conductivity and the microstructure of the as-cast material were investigated. By measuring the density_(${\rho}$), specific heat_(Cp) and thermal diffusivity_(${\alpha}$), the thermal conductivity_(${\lambda}$) was calculated by the equation ${\lambda}={\rho}{\cdot}Cp{\cdot}{\alpha}$. As the amount of Cu increased in the Mg-6Zn-xCu alloy, the heat transfer characteristics were improved, resulting in a synergistic effect which is slow when the added Cu exceeds 1 wt.%. In order to investigate the relative thermal conductivity/emission of the Mg-6Zn-xCu alloy, AZ91 and AZ31 were experimentally evaluated and compared using a separate test equipment. As a result, the Mg-6Zn-1.5Cu alloy when compared to AZ91 showed improvements in the thermal conductivity ranging from 30 to 60% with a nearly 20% improvement in the thermal emission.