• Title/Summary/Keyword: Cu$_2$O

검색결과 3,618건 처리시간 0.032초

단일 수성가스 전이 반응용 Cu/CeO2 촉매 최적화: 수산화탄산세륨 전구체를 이용한 CeO2 제조 및 최적 Cu 담지량 선정 (Optimization of Cu/CeO2 Catalyst for Single Stage Water-Gas Shift Reaction: CeO2 Production Using Cerium Hydroxy Carbonate Precursor and Selection of Optimal Cu Loading)

  • 허유승;정창훈;박민주;김학민;강부민;정대운
    • 한국수소및신에너지학회논문집
    • /
    • 제32권6호
    • /
    • pp.455-463
    • /
    • 2021
  • In this study, CeO2 support is synthesized from cerium hydroxy carbonate prepared using precipitation/digestion method using KOH and K2CO3 as the precipitants. The Cu was impregnated to CeO2 support with the different loading (Cu loading=10-40 wt. %). The prepared Cu/CeO2 catalysts were applied to a single stage water gas shift (WGS) reaction. Among the prepared catalysts, the 20Cu/CeO2 catalyst contained 20 wt.% of Cu showed the highest CO conversion (Xco=68% at 400℃). This result was mainly due to a large amount of active sites. In addition, the activity of the 20 Cu/CeO2 catalyst was maintained without being deactivated for 100 hours because of the strong interaction between Cu and CeO2. Therefore, it was confirmed that 20 Cu/CeO2 is a suitable catalyst for a single WGS reaction.

Cu(Mg) alloy의 산화방지막 형성에 영향을 미치는 인자 (Factors affecting passivation of Cu(Mg) alloy film)

  • 조흥렬;조범석;이원희;이재갑
    • 한국진공학회지
    • /
    • 제9권2호
    • /
    • pp.144-149
    • /
    • 2000
  • Cu(4.5at.% Mg) target을 이용하여 sputtering에 의해 증착된 Cu(Mg) alloy박막의 열처리시 형성되는 산화 방지막 MgO의 박막 특성에 영향을 주는 인자에 대해 살펴보았다. MgO 박막의 산화방지 능력 및 막질에 영향을 주는 인자로는 열처리 온도, $O_2$ 압력, Mg 농도 등으로 나타났다. MgO 박막의 두께는 열처리 온도가 증가함에 따라 증가하다 $500^{\circ}C$ 이상에서는 150 $\AA$ 정도의 성장한계두께를 나타내었다. 표면에 형성되는 MgO 박막은 $O_2$압력이 낮을수록, Mg의 농도가 높을수록 치밀한 MgO가 형성되어 산화방지에 우수한 특성을 보였으며 전 열처리 과정인 진공 열처리 공정은 1at.%정도의 낮은 Mg 농도에서도 치밀한 MgO형성에 매우 효과적임이 확인되었다. 본 연구에서 Cu(Mg) alloy박막의 열처리를 통해 낮은 저항의 Cu박막의 형성과 동시에 산화방지에 우수한 특성을 보이는 MgO 박막을 열처리 온도, $O_2$ 압력, Mg 농도 등의 최적조건을 이용하여 얻어질 수 있음을 확인하였다.

  • PDF

Mn-Cu/Al2O3 촉매 상에서 NO, CO 및 CH4 동시 산화 (Simultaneous Oxidation of NO, CO, and CH4 over Mn-Cu/Al2O3 Catalyst)

  • 정지은;이창용
    • 공업화학
    • /
    • 제35권1호
    • /
    • pp.1-7
    • /
    • 2024
  • NO, CO 및 CH4의 동시 산화를 위한 4 종의 Mn-M/Al2O3 (M = Cu, Fe, Co, Ce) 촉매를 제조하여 산화 활성을 비교하고, 동시 산화활성이 가장 높은 Mn-Cu/Al2O3 촉매에 대해 XRD, Raman, XPS, O2-TPD 분석을 수행하였다. XRD 분석 결과, Mn-Cu/Al2O3 촉매에서는 담지된 Mn과 Cu는 복합산화물로 존재하였다. Raman 및 XPS 분석을 통해 Mn-Cu/Al2O3 촉매는 Mn-O-Cu 결합의 형성 과정에서 Mn 이온과 Cu 이온 간의 전자 수수가 일어남을 알 수 있었다. XPS O 1s 및 O2-TPD 분석을 통해 Mn-Cu/Al2O3 촉매는 Mn/Al2O3 촉매에 비해 이동성이 우수한 흡착산소 종이 증가했음을 알 수 있었다. Mn-Cu/Al2O3 촉매의 높은 동시 산화 활성은 이러한 결과에 기인한다고 판단된다. Mn-Cu/Al2O3 촉매 상에서 NO는 CO와 CH4 산화를 촉진하지만, NO 산화는 억제되었다. 이는 NO로부터 산화된 NO2가 CO 및 CH4의 산화제로 사용되었기 때문이라고 추측된다. CO와 CH4의 산화 반응은 경쟁하지만 촉매 활성 온도가 다르기 때문에 그 효과가 두드러지지 않았다.

고온수성가스전이반응 적용을 위한 Cu-CeO2-MgO 촉매의 제조방법 최적화 (An Optimization of Synthesis Method for High-temperature Water-gas Shift Reaction over Cu-CeO2-MgO Catalyst)

  • 전이정;김창현;심재오
    • 청정기술
    • /
    • 제29권4호
    • /
    • pp.321-326
    • /
    • 2023
  • 최근 탄소중립과 관련하여 연소 시 이산화탄소 배출이 없어 청정한 수소에너지에 대한 관심이 증가하고 있다. 이에 따라 수소 생산에 관련된 연구가 계속되고 있으며 본 연구에서는 폐기물을 처리함과 동시에 고순도 수소를 생산하기 위해 폐기물 유래 합성가스를 수성가스전이반응에 적용하였다. 마그네슘을 세륨과 함께 지지체로 사용하여 고온수성가스전이(HT-WGS)반응에서 촉매의 활성을 향상시키고자 하였다. HT-WGS 반응의 활성물질로 구리를 사용해 Cu-CeO2-MgO 촉매를 제조하였으며, 제조방법에 따른 촉매활성 연구를 진행하였다. HT-WGS 반응 결과 함침법으로 제조된 Cu-CeO2-MgO 촉매가 가장 높은 활성을 보였으며, 이는 가장 높은 산소 저장능과 많은 활성 Cu 종을 가지는 특성에 기인한 결과이다.

A Facile Method for the Synthesis of Freestanding CuO Nanoleaf and Nanowire Films

  • Zhao, Wei;Jung, Hyunsung
    • 한국표면공학회지
    • /
    • 제51권6호
    • /
    • pp.360-364
    • /
    • 2018
  • A facile method to fabricate freestanding CuO nanoleaves and CuO nanowires-based films was demonstrated. $Cu(OH)_2$ nanoleaves and nanowires were prepared by a hydrolysis reaction in aqueous solution including pyridine and NaOH with the tailored concentrations at room temperature. The films of freestanding CuO nanoleaves and CuO nanowires can be successfully obtained via the simple vacuum infiltration following a thermal dehydration reaction. The morphologies and crystallinity of the $Cu(OH)_2$ nanoleaves/nanowires and CuO nanoleaves/nanowires were characterized by XRD, SEM, TEM and FT-IR. The films fabricated with freestanding CuO nanoleaves and nanowires in this study may be applicable for building high-efficiency organic binder-free devices, such as gas sensors, batteries, photoelectrodes for water splitting and so on.

$Cu-Mn/CeO_2-ZrO_2$ 촉매를 이용한 질소산화물 제거 반응 (Removal of Nitrogen Oxides Using $Cu-Mn/CeO_2-ZrO_2$ Catalyst)

  • 전미진;전종기;박성훈;박영권
    • 공업화학
    • /
    • 제23권3호
    • /
    • pp.348-351
    • /
    • 2012
  • 본 연구에서는 NO의 저온 SCR 반응에서 구리 첨가가 $Mn/CeO_2-ZrO_2$ 촉매의 활성에 미치는 영향을 알아보았다. 이를 위하여 $Mn/CeO_2-ZrO_2$ 촉매에 구리가 각각 5, 10, 15 wt% 첨가된 세가지 촉매의 활성을 조사하였다. 촉매의 특성은 BET, XRD, XPS, $H_2-TPR$을 통해 분석하였다. 구리가 첨가된 촉매의 질소산화물 저감 효율을 측정한 결과 Cu 농도가 증가할수록 활성이 증가하였으며 Cu 15 wt%가 담지하였을 경우 질소산화물 저감효율이 99%까지 도달하는 등 가장 높은 저감효율을 나타내었다. 이는 표면의 망간과 구리의 interaction에 의한 환원의 향상이 촉매 효율 증가의 원인으로 여겨진다.

촉매반응에 의한 연탄 연소가스로부터 일산화탄소의 제거 (제1보) (Removal of Carbon Monoxide from Anthracite Flue Gas by Catalytic Oxidation (I))

  • 정기호;이원국
    • 대한화학회지
    • /
    • 제20권5호
    • /
    • pp.431-437
    • /
    • 1976
  • 연탄 연소가스중의 일산화탄소와 산소 사이의 반응을 몇가지 촉매에 대해 조사했다. 이산화망간, 산화 동 및 그 혼합촉매를 사용하였으며, 그 실효반응 온도(effective reaction temperature)는 각각 다음과 같다. 즉, $MnO_2$ 단독촉매 및 30% $MnO_2$-70% CuO 혼합촉매는 $250^{\circ}C,\;CuO$$450^{\circ}C$, 50% $MnO_2$-50% CuO는$200^{\circ}C$, 70% $MnO_2$-30% CuO는$180^{\circ}C$였다. 실효반응온도 이하에서 일산화탄소의 산화율은 일산화 탄소의 농도가 증가함에 따라 감소하는 경향을 보였으며, 실효반응 온도 이상에서는 변화가 없었다. 반응기 내 체재시간은 0.9 ∼ 1.8초의 범위 내에서는 일산화탄소 산화반응에 조금도 영향을 주지 않았다.

  • PDF

Polyoxometalate Tri-supported Transition Metal Complexes를 이용한 Dihydropyrimidinones의 one-pot 합성 (One-pot Synthesis of Dihydropyrimidinones Using Polyoxometalate Tri-supported Transition Metal Complexes)

  • Fazaeli, Razieh;Aliyan, Hamid;Mohammadifar, Foroogh;Zamani, Amir Abbas;Bagi, Mohammad Javad
    • 대한화학회지
    • /
    • 제55권4호
    • /
    • pp.666-672
    • /
    • 2011
  • Vanadium 치환체인 polyoxometalate 1, [Cu(2,2'-bipy)]$[Cu(2,2'-bipy)_2]_2[PMo_8V_6O_{42}]{\cdot}1.5H_2O$을 가지고 있는 inorganicorganic complex의 촉매 활성도를 Biginelli 반응에 적용하여 연구하였다. Dihydropyrimidinones를 one-pot 합성하는 반응에서, $H_3PMo_{12}O_{40}$ 촉매 보다[Cu(2,2'-bipy)]$[Cu(2,2'-bipy)_2]_2[PMo_8V_6O_{42}]{\cdot}1.5H_2O$ 촉매가 더 좋은 결과를 나타내었다.

Effect of AC and Cu2O from Cu/Cu2O-AC/TiO2 Composite Catalysts on the Photocatalytic Degradation of MO Under Visible Light

  • Meng, Ze-Da;Ghosh, Trisha;Cho, Jung-Hwan;Zhu, Lei;Park, Chong-Yeon;Choi, Jong-Geun;Oh, Won-Chun
    • 한국세라믹학회지
    • /
    • 제48권6호
    • /
    • pp.571-576
    • /
    • 2011
  • Activity carbon (AC), Cu and $Cu_2O$ modified $TiO_2$ composites (Cu/$Cu_2O$-AC/$TiO_2$) were prepared using a sol-gel method. The characteristics of the composites were evaluated using Brunauer-Emmett-Teller (BET) surface area measurements, X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis and scanning electron microscope (SEM) analysis. A methyl orange (MO) solution under visible light irradiation was used to determine the photocatalytic activity. The degradation of MO was determined using UV/Vis spectrophotometry. $Cu_2O$, Cu and the cooperative effect of the AC increased the photo-absorption effect, thus increasing in photocatalytic activity.