• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3051-3057
• /
• 2021

The concrete is considered as an important radiation shielding material employed widely in nuclear reactors, particle accelerators, laboratory hot cells and other different radiation sources. The present research is dedicated to the shielding properties study of the ordinary concrete reinforced with different weight fractions of lead oxide micro/nano particles. Lead oxide particles were fabricated by chemical synthesis method and their properties including the average size, morphological structure, functional groups and thermal properties were characterized by XRD, FESEM-EDS, FTIR and TGA analysis. The gamma ray mass attenuation coefficient of concrete composites has been calculated and measured by means of the Monte Carlo simulation and experimental methods. The simulation process was based on the use of MCNP Monte Carlo code where the mass attenuation coefficient (μ/ρ) has been calculated as a function of different particle sizes and filler weight fractions. The simulation results showed that the employment of the lead oxide filler particles enhances the mass attenuation coefficient of the ordinary concrete, drastically. On the other hand, there are approximately no differences between micro and nano sized particles. The mass attenuation coefficient was increased by increasing the weight fraction of nanoparticles. However, a semi-saturation effect was observed at concentrations more than 10 wt%. The experimental process was based on the fabrication of concrete slabs filled by different weight fractions of nano lead oxide particles. The mass attenuation coefficients of these slabs were determined at different gamma ray energies using ²²Na, ¹³⁷Cs and ⁶⁰Co sources and NaI (Tl) scintillation detector. The experimental results showed that the HVL parameter of the ordinary concrete reinforced with 5 wt% of nano PbO particles was reduced by 64% at 511 keV and 48% at 1332 keV. Reasonable agreement was obtained between simulation and experimental results and showed that the employment of nano PbO particles is more efficient at low gamma energies up to 1Mev. The proposed concrete is less toxic and could be prepared in block form instead of toxic lead blocks.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.949-959
• /
• 2021

The current study aims to explore the shielding properties of multi-component borate-based glass series. Seven glass-samples with composition of (80-y)H₃BO₃-10ZnO-10Na₂O-yBaO where (y = 0, 5, 10, 15, 20, 25 and 30 mol.%) were synthesized by melt-quench method. Various shielding features for photons, neutrons, and protons were determined for all prepared samples. XCOM, Phy-X program, and SRIM code were performed to determine and explain several shielding properties such as equivalent atomic number, exposure build-up factor, specific gamma-ray constants, effective removal cross-section (Σ_R), neutron scattering and absorption, Mass Stopping Power (MSP) and projected range. The energy ranges for photons and protons were 0.015-15 MeV and 0.01-10 MeV, respectively. The mass attenuation coefficient (μ/ρ) was also determined experimentally by utilizing two radioactive sources (¹⁶⁶Ho and ¹³⁷Cs). Consistent results were obtained between experimental and XCOM values in determining μ/ρ of the new glasses. The addition of BaO to the glass matrix led to enhance the μ/ρ and specific gamma-ray constants of glasses. Whereas the remarkable reductions in Σ_R, MSP, and projected range values were reported with increasing BaO concentrations. The acquired results nominate the use of these glasses in different radiation shielding purposes.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.156-165
• /
• 2020

330 Korean adult women were examined the correlation between degree of makeup and makeup satisfaction before/after wearing masks due to COVID-19 and the moderating effect of mandatory/voluntary goal-oriented attitude toward makeup. The study found that lip makeup(p<.001) was significant variable in makeup satisfaction before COVID-19, and eyebrow makeup(0<.002) was significant after COVID-19. Although moderating effect of mandatory goal-oriented attitude, which works between degree of makeup before/after COVID-19 and makeup satisfaction was not significant, but moderating effect of voluntary goal-oriented attitude appeared to be significant before(p<.000) and after(p<.000) COVID-19. And the degree of makeup after COVID-19 was lower than before(p<.000). If one believe that makeup is for one's own satisfaction, degree of makeup can be significant effect on the makeup satisfaction, but actual behavior has shown that degree of makeup has decreased since wearing masks because of COVID-19. I hope this research will be used as marketing material for beauty and cosmetics industry.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.361-368
• /
• 2020

PURPOSE. The present study aimed to evaluate the accuracy of a desktop scanner and intraoral scanners based on the volumetric dimensions of a complete arch. MATERIALS AND METHODS. Seven reference models were fabricated based on the volumetric dimensions of complete arch (70%, 80%, 90%, 100%, 110%, 120%, and 130%). The reference models were digitized using an industrial scanner (Solutionix C500; MEDIT) for the fabrication of a computer-aided design (CAD) reference model (CRM). The reference models were digitized using three intraoral scanners (CS3600, Trios3, and i500) and one desktop scanner (E1) to fabricate a CAD test model (CTM). CRM and CTM were then superimposed using inspection software, and 3D analysis was conducted. For statistical analysis, one-way analysis of variance was used to verify the difference in accuracy based on the volumetric dimensions of the complete arch and the accuracy based on the scanners, and the differences among the groups were analyzed using the Tukey HSD test as a post-hoc test (α=.05). RESULTS. The three different scanners showed a significant difference in accuracy based on the volumetric dimensions of the complete arch (P<.05), but the desktop scanner did not show a significant difference in accuracy based on the volumetric dimensions of the complete arch (P=.808). CONCLUSION. The accuracy of the intraoral scanners was dependent on the volumetric dimensions of the complete arch, but the volumetric dimensions of the complete arch had no effect on the accuracy of the desktop scanner. Additionally, depending on the type of intraoral scanners, the accuracy differed according to the volumetric dimensions of the complete arch.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.163-172
• /
• 2021

This study aims to establish a research model to analyze the structural relationship between the working environment of the elderly medical welfare facility workers, the trust of the manager, and the quality of service. As a result, first, it was found that there was a significant causal relationship among service quality in the working environment of the elderly medical welfare facility workers. Second, it was found that there was a significant causal relationship between the working environment and the trust of managers of the elderly medical welfare facility workers. Therefore, in order to achieve the goal of the elderly medical welfare facility and improve the quality of service, it is necessary to create a working environment and establish a trust relationship among members. In addition, in order to cultivate competency and provide high-quality services for the elderly medical welfare facility workers, managers need to understand the individual characteristics of members, and to assign duties according to roles, accurate division of duties and personnel management are required.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.188-193
• /
• 2021

In this study, the moisture content of the face skin was changed according to the number of skin applications for female college students under 25 years of age. Moisture contents were measured using a skin moisture meter (skin oil and moisture meter, PRC, China). Skin used 500ml of Innisfree's blueberry rebalancing skin as a clinical trial material. Both the forehead, eyes, cheeks, and chin had a higher moisture content after one layer of application than before and after one layer of application, and after ten layers of application, it can be seen that the moisture content is higher. As a result, when applying basic products after washing your face, the first step is to increase the number of skins, and then apply basic products such as lotion and moisturizing cream to increase the moisture content.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.16-24
• /
• 2021

This paper introduces a smart aging service that helps the elderly lead a happy old age by actively utilizing IoT and AI technologies for the elderly who are increasing rapidly as they enter the aging society. In particular, we propose a future-oriented, age-friendly well-being support system that breaks away from the existing welfare concept to solve the aging problem but leads to a paradigm shift toward building a vibrant aging society by protecting from emergency and satisfying emotions. By introducing IoT and AI, it judges the life situation and emotional state from the living information of the elderly can respond to emergencies and suggest meetings as a change of mood and give an emotional comfort. Since the proposed system uses artificial intelligence techniques to determine the degree of depression when inputting information such as pulse-rate, dangerous word usage, and external communication, I think it showed the feasibility of the new concept of wellbeing support system that is totally different from conventional wellbeing concept of health-care.

• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.166-176
• /
• 2022

The purpose of this study was to investigate the construct of Korean Version of Mental Toughness through Open-ended Questionnaire for soccer Players and coach. Data collection was inductively analyzed by distributing open questionnaires to 100 soccer players belonging to the Korean Football Association and 100 soccer coaches who participated in the training for obtaining a soccer coach's license. The resulting results are as follows. First, as a result of the inductive content analysis of korean version soccer players mental toughness, 11 factors were derived in the detailed area and 6 factors in the general area. Secondly, in the results on the mental toughness of Korean version soccer players according to soccer players and coaches, both players and coaches were found to be the highest factor, kkangdagu. I hope that the results of this study will be used as basic data for efforts to reduce the improving performance for soccer players and coaches.

• Advances in concrete construction
• /
• v.13 no.2
• /
• pp.123-132
• /
• 2022

This paper aims to adapt Multilinear regression (MLR) to predict the strength and toughness of SIFCON containing various pozzolanic materials. Slurry Infiltrated Fibrous Concrete (SIFCON) is one of the most common terms used in concrete manufacturing, known for its benefits such as high ductility, toughness and high ultimate strength. Assessment of compressive strength (CS.), flexural strength (F.S.), splitting tensile strength (STS), dynamic elasticity modulus (DME) and impact energy (I.E.) using the experimental approach is too costly. It is time-consuming, and a slight error can lead to a repeat of the test and, to solve this, alternative methods are used to predict the strength and toughness properties of SIFCON. In the present study, the experimentally investigated SIFCON data about various mix proportions are used to predict the strength and toughness properties using regression analysis-multilinear regression (MLR) models. The input parameters used in regression models are cement, fibre, fly ash, Metakaolin, fine aggregate, blast furnace slag, bottom ash, water-cement ratio, and the strength and toughness properties of SIFCON at 28 days is the output parameter. The models are developed and validated using data obtained from the experimental investigation. The investigations were done on 36 SIFCON mixes, and specimens were cast and tested after 28 days of curing. The MLR model yields correlation between predicted and actual values of the compressive strength (C.S.), flexural strength, splitting tensile strength, dynamic modulus of elasticity and impact energy. R-squared values for the relationship between observed and predicted compressive strength are 0.9548, flexural strength 0.9058, split tensile strength 0.9047, dynamic modulus of elasticity 0.8611 for impact energy 0.8366. This examination shows that the MLR model can predict the strength and toughness properties of SIFCON.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2662-2669
• /
• 2023

For the precise measurements of special nuclear materials (SNM) including Pu and Am isotopes, we have used phoswich detector combination of two single crystal scintillators of Gd₃Ga₃Al₂O₁₂:Ce and CsI:Tl. High detection efficiency and sensitivity along with high figure of merit for the discrimination of these phoswich detectors ensures the detection and discrimination of thermal neutrons and gammas from spontaneous fission of Pu and other isotopes in presence of high gamma background. Using this detector, the low energy gammas, which is stopped completely in 1mm thick disc of GGAG, can be also discriminated from high energies gamma and shows linearity in wide range of sample quantities. By changing only the appropriate shielding, the similar setup was used for thermal neutron detection and shows a very good linearity over wide range. The quantity of a test sample was also calculated accurately by using the measured calibrated plot.