• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.835-840
• /
• 2020

A position-sensitive CsI(Tl) crystal array coupled with the multi-anode position sensitive photomultiplier tube (PS-PMT), Hamamatsu H8500C, has been developed at the Institute of Modern Physics. An effective, fast, and economical readout circuit based on discretized positioning circuit (DPC) bridge was designed for the 64-channel multi-anode flat panel PSPMT. The horizontal and vertical position resolutions are 0.58 mm and 0.63 mm respectively for the 1.0 × 1.0 × 5.0 ㎣ CsI(Tl) array, and the horizontal and vertical position resolutions are 0.86 mm and 0.80 mm respectively for the 2.0 × 2.0 × 10.0 ㎣ CsI(Tl) array. These results show that the CsI(Tl) crystal array with low cost could be applied in the fields of medical imaging and high-resolution gamma camera.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.412-414
• /
• 2003

This paper is about research of scintillator layer, which is used for Hybrid method to increase electric signals in a-Se, the material of Direct method. In case of the thermal evaporation, CsI has column structure which is an disadvantage as scintillator. But it decreases scattering of incident X-ray, has better Light output intensity than other scintillation materials. CsI was made by Thermal evaporation. The Doping material, Na, 0.1, 0.3, 0.5, 0.7g were added in each sample. Analysis of absorbed wavelength, PL(Photoluminescence), Light output intensity, SEM, and XRD analysis were performed to analyze optical characteristics. Doping rate of CsI:Na to use as scintillation layer in a-Se based detector could be optimized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.415-417
• /
• 2003

CsI 형광체는 X선에 대한 분해능 및 변환효율이 우수한 물질이다. 최근 대면적 평판형 X선 영상검출기의 변환층으로 이용하기 위해 CsI 형광체의 대면적 제조에 대한 연구가 활발히 진행되고 있다. 본 논문은 진공 열증착법을 이용하여 증착속도(3, 3.8, $4.5\;{\mu}m/min$)에 따라 $20\;{\mu}m$ 두께의 CsI 필름을 제조하였고, XRD 및 SEM 분석을 통해 CsI 필름의 기하학적 구조를 조사하였다. 증착된 CsI 필름은 증착속도에 관계없이 복잡한 다결정 구조를 가지며, $3\;{\mu}m/min$의 증착속도에서 약 $1\;{\mu}m$ 크기로 needle-like 한 columnar structure를 가졌다. As results, about 3um/min evaporation rate formed as good geometry characteristics CsI layer.

• 센서학회지
• /
• 제30권5호
• /
• pp.279-285
• /
• 2021

Recently, cesium tellurium iodine (Cs₂TeI₆) has emerged as an inorganic halide perovskite material with potential application in optoelectronic devices due to its high absorption coefficient, suitable bandgap and because it consists of nontoxic and earth-abundant elements. However, studies on its fabrication process as well as photoresponse characteristics are limited. In this study, a simple and effective method is introduced for the synthesis of Cs₂TeI₆ thin films by a two-step dry process. A Cs₂TeI₆-based lateral photosensor was fabricated, and its photoresponse characteristics were explored under laser illuminations of four different wavelengths in the visible range: 405, 450, 520, and 655 nm. The initial photosensing results suggest potential application and can lead to more promising studies of Cs₂TeI₆ film in optoelectronics.

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.251-256
• /
• 2007

The crystal structure of fully dehydrated partially Cs+-exchanged zeolite X, [Cs52Na40Si100Al92O384], a = 24.9765(10) A, has been determined by single-crystal X-ray diffraction techniques in the cubic space group Fd3 at 21 °C. The crystal was prepared by flow method for 5 days using exchange solution in which mole ratio of CsOH and CsNO3 was 1 : 1 with total concentration of 0.05 M. The crystal was then dehydrated at 400 °C and 2 × 10-6 Torr for 2 days. The structure was refined to the final error indices, R1 = 0.051 and wR2 (based on F2) = 0.094 with 247 reflections for which Fo > 4σ (Fo). In this structure, about fifty-two Cs+ ions per unit cell are located at six different crystallographic sites with special selectivity; about one Cs+ ion is located at site I, at the centers of double oxygen-rings (D6Rs), two Cs+ ions are located at site I', and six Cs+ ions are found at site II'. This is contrary to common view that Cs+ ions cannot pass sodalite cavities nor D6Rs because six-ring entrances are too small. Ring-opening by the formation of ?OH groups and ring-flexing make Cs+ ions at sites I, I', and II' enter six-oxygen rings. The defects of zeolite frameworks also give enough mobility to Cs+ ions to enter sodalite cavities and D6Rs. Another six Cs+ ions are found at site II, thirty-six are located at site III, and one is located at site III' in the supercage, respectively. Forty Na+ ions per unit cell are located at two different crystallographic sites; about fourteen are located at site I, the centers of D6Rs and twenty-six are also located at site II in the supercage. Cs+ ions and Na+ ions at site II are recessed ca. 0.34(1) A and 1.91(1) A into the supercage, respectively. In this work, the highest exchange level of Cs+ ions per unit cell was achieved in zeolite X by conventional aqueous solution methods and it was also shown that Cs+ ion could pass through the sixoxygen rings.

• 대한영양사협회학술지
• /
• 제13권2호
• /
• pp.138-156
• /
• 2007

The purposes of this study were to a) measure the service quality attributes of foodservice type such as school foodservice, hospital foodservice and business & industry(B&I) foodservice, managed by contract management company(CMC), b) compare with service quality attributes by CMC scale, c) analyze overall customer satisfaction(CS) by the foodservice type and the CMC scale, and d) identify the effect of service quality attributes on an overall CS by the foodservice type and the CMC scale. The questionnaires were handed out to 6,620 customers of 207 school, 38 hospital, and 86 B&I foodservices in 108 CMCs. The statistical data analysis was completed using SPSS Win(ver 12.0) for descriptive analysis, t-test, reliability analysis, and multiple linear regression analysis. From an analysis on service quality attributes, 'proper arrangement of table and chair at hall distribution(3.53)', 'operation of nutrition education(3.50)' were highly perceived to student, 'correctable serving(4.08)', 'serve at fixed distribution time(4.08)', 'kindness of serving employee(4.04)' were highly perceived to patient, 'employee's kindness(3.84)' were highly perceived to customer of B&I. In comparison of service quality attributes by CMC scale, most scores of large enterprise(LE) were significantly higher than small and medium sized enterprise(SME) in school foodservice, hospital foodservice and B&I foodservice. Overall CS levels were 3.53 out of a maximum 5 on B&I, 3.46 on school, and 3.44 on hospital and were evaluated differently CS score by CMC scale. Finally, regression results for the effects of service quality attributes on overall CS by each of foodservice type were identified significantly different service quality attributes by foodservice type such as school, hospital, B&I(p<.001) and by CMC scale. For considering the goal of enterprise on profit-making through CS and the needs of customer on CS at moment of truth(MOT), the findings should be applied to the CMC and the foodservice industry.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1121-1126
• /
• 2002

Two anhydrous crystal structures of fully dehydrated Cd2+ - and Cs+ -exchanged zeolite X, Cd32Cs28Si100Al92O384 (Cd32Cs28-X: a = 24.828(11) $\AA)$ and fully dehydrated Cd,sup>2+ - and Rb+ -exchanged zeolite X, Cd28Rb36Si100Al92O384 (Cd28Rb36-X: a = 24.794(2) $\AA$), have been determined by single-crystal X-ray diffraction techniques in the cubic space group Fd3 at $21(1)^{\circ}C.$ The structures were refined to the final error indices, R1 = 0.058 and R2 = 0.065 with 637 reflections for Cd32Cs28-X and R1 = 0.086 and R2 = 0.113 with 521 reflections for Cd28Rb36-X for which I > $3\sigma(I)$. In the structure of Cd,sub>32Cs28-X, 16 Cd2+ ions fill the octahedral sites I at the centers of the double six rings (Cd-O = $2.358(8)\AA$ and O-Cd-O = $90.8(3)^{\circ}$ ). The remaining 16 Cd2+ ions occupy site II (Cd-O = $2.194(8)\AA$ and O-Cd-O = $119.7(4)^{\circ})$ and six Cs+ ions occupy site II opposite to the single six-rings in the supercage; each is $2.322\AA$ from the plane of three oxygens (Cs-O = 3.193(13) and O-Cs-O = $73.0(2)^{\circ}).$ Aboutten Cs+ ions are found at site II', $1.974\AA$ into the sodalite cavity from their three oxygen plane (Cs-O = $2.947(8)\AA$ and O-Cs-O = $80.2(3)^{\circ}).$ The remaining 12 Cs+ ions are distributed over site III' (Cs-O = 3.143(9) and O-Cs-O= $59.1(2)^{\circ})$. In the structure of Cd28Rb36-X, 16 Cd2+ ions fill the octahedral sites I at the center of the double-sixrings (Cd-O = 2.349(15) and O-Cd-O = $91.3(5)^{\circ}$ ). Another 12 Cd2+ ions occupy two different II sites (Cd-O = $2.171(18)/2.269(17)\AA$ and O-Cd-O = $119.7(7)/113.2(7)^{\circ}).$ Fifteen Rb+ ions occupy site II (Rb-O = $2.707(17)\AA$ and O-Rb-O = $87.8(5)^{\circ}).$ The remaining 21 Rb+ ions are distributed over site III' (Rb-O = $3.001(16)\AA$ and O-Rb-O = $60.7(4)^{\circ})$. It appears that the smaller and more highly charged Cd2+ ions prefer sites I and Ⅱ in that order, and the larger Rb+ and Cs+ ions, which are less able to balance the anionic charge of the zeolite framework, occupy sites II and II' with the remainder going to the least suitable site in the structure, site III'.The maximum Cs+ and Rb+ ion exchanges were 30% and 39%, respectively. Because these cations are too largeto enter the small cavities and their charge distributions may be unfavorable, cation-sieve effects might appear.

• 대한화학회지
• /
• 제38권9호
• /
• pp.621-627
• /
• 1994

$Ag^{+}$ 이온과 $Ca^{2+}$ 이온으로 치환된 제올라이트 $A(Ag_{12-2x}Ca_{x}-A$, x=2 및 3)$를 탈수하고 $250^{\circ}C$, 0.15torr의 Cs 증기로 처리한 결정구조를 X-선 단결정 회절법으로 입방공간군 Pm{\bar\3m(a=12.344(2){\AA}$/ 과 12.304(2) $\AA$)을 사용하여 해석하였다. 이들 구조에서 최종 오차인자 값 Rw는 I > $3\sigma(I)$인 180 및 179개의 반사를 이용하여 0.091 및 0.093까지 정밀화시켰다. 이들 구조에서 Cs종은 네 개의 서로 다른 결정학적 자리에 위치하였다. 단위세포당 세 개의 $Cs^{+}$ 이온은 8-링 중심에 위치하여, 6.81~7.14개의 $Cs^{+}$이온은 큰 동공내의 3회 회전축상 6-링상에 위치하고, 1.83~2.03개의 $Cs^{+}$ 이온은 소다라이트 동공내의 3회 회전축상에 위치하고, 0.66~0.71개의 $Cs^{+}$이온은 4-링에 위치하였다. 또한 4.12~4.27개의 Ag 원자는 큰 동공 중심 가까이에 위치하였다. 이들 구조에서 단위세포내에 과잉으로 흡착된 Cs원자들은 3회 회전축상 위에 놓여 있는 $Cs^{+}$이온과 결합하여 선형의 $(Cs_4)^{3+}$ 클라스터를 형성하고 있었다. 또 $Cs^+$ 이온이 8-링을 차지하고 있어서 은 원자가 구조 밖으로 나오지 못하게 막고 있었다. 이들 원자는 큰 동공 중심에서 hexasilver 클라스터를 형성하고 있었으며, 14개의 $Cs^{+}$ 이온과 배위하여 안정화되어 있었다.

• 한국수산과학회지
• /
• 제52권4호
• /
• pp.334-343
• /
• 2019

We investigated the sanitary characteristics of Alaska pollock Theragra chalcogramma roe as a raw material based on the standards of several countries. The standards for raw materials of Alaska pollock roe for lead, total mercury, $^{134}Cs+^{137}Cs$, and $^{131}I$ were those of the South Korean Ministry of Food and Drug Safety; Staphylococcus aureus, Salmonella spp., Clostridium botulinum, methyl mercury, $^{134}Cs+^{137}Cs$, $^{131}I$, $^{239}Pu$, and $^{90}Sr$ were those of the United States Food and Drug Administration; lead, methyl mercury, inorganic arsenic, chrome, $^{134}Cs+^{137}Cs$, and $^{131}I$ were those of the Ministry of Agriculture of China; nitrite ion, $^{134}Cs+^{137}Cs$, $^{239}Pu$, and $^{235}U$ were those of the Ministry of Health, Labor and Welfare of Japan; $^{134}Cs+^{137}Cs$, $^{131}I$, $^{239}Pu$, and $^{90}Sr$ were those of Codex; and $^{134}Cs+^{137}Cs$, $^{131}I$, $^{239}Pu$, $^{241}Am$, and $^{90}Sr$ were those of the European Food Safety Authority. The results for the global standard items other than C. botulinum (lead, total mercury, methyl mercury, inorganic arsenic, chrome, $^{134}Cs+^{137}Cs$, and $^{131}I$, S. aureus, and Salmonella spp.) suggest that Alaska pollock roe is safe for use as a raw material.

• Current Photovoltaic Research
• /
• 제10권4호
• /
• pp.101-106
• /
• 2022

We prepared a CsPbI₂Br solution using Cesium iodide (CsI), Lead (II) bromide (PbBr₂) and Lead (II) iodide (PbI₂) materials into a polar solvent mixture of N,N-dimethylformamide (DMF) and Dimethyl sulfoxide (DMSO). A simple spin coating technique was used for the fabrication of CsPbI₂Br absorber layer in the solution process. In order to prepare uniform coating of absorber film we adopted a hot-air process in assocation with the spin coating. It was confirmed that the thin film manufactured by the hot-air process had a higher absorption rate than that without it, and the optical band gap was measured 1.93 eV. The thin film of absorber was uniformly prepared and revealed the Black α-Cubic crystal phase as proved through X-ray diffraction analysis. Finally, a perovskite solar cell having an n-i-p structure was manufactured with a CsPbI₂Br perovskite absorption layer. From the solar cell, we obtained a power conversion efficiency (PCE) of 5.97% in a forward measurement.