• 한국잠사곤충학회지
• /
• 제37권2호
• /
• pp.176-180
• /
• 1995

나비목과 파리목 곤충에 독성을 보이는 B. thuringiensis NT0423을 수용체로 하여 형질전환된 B. thuringiensis PT0529에서 원래 수용체가 생성하는 내독소 단백질과 도입된 CryIVD 및 CytA 단백질들간의 발현 특성을 분석하기 위하여, B. thuringiensis PT0529에서 내독소 단백질들간의 발현을 성장 과정에 따라 투과 전자 현미경 관찰 및 단백질 전기영동으로 분석하였다. 그 결과, B. thuringiensis PT0529에서 내독소 단백질의 발현은 원래의 수용체 내독소 단백질보다 도입된 CryIVD와 CytA가 먼저 합성되었으며, 그 발현량에 있어서도 높게 나타났다. 또한, B. thuringiensis PT0529에서 세가지 내독소 단백질은 그들 자신의 고유 형태로 잘 발현되었으나, 수용체인 B. thuringiensis NT0423의 내독소 단백질은 그 크기에 있어서 다소 작게 관찰되었다. 따라서 형질전환체 내에서 도입된 내독소 단백질 유전자의 발현은 수용체의 내독소 단백질 유전자 발현에 영향을 받지 않는 반면 외부 유전자의 도입으로 인하여 수용체가 생성하는 내독소 단백질은 그 발현에 있어서 간섭을 받는 것으로 나타났다.

• 한국재료학회지
• /
• 제22권8호
• /
• pp.397-402
• /
• 2012

Morphological control on hydroxyapatite crystals has attractive prospects in research to clarify the effects of crystal planes on biological performance. Hydrothermal processing is known as a typical type of processing for fabricating well-grown crystals with unique morphology. The purpose of the present study is to examine the feasibility of well-crystallized crystals with oriented structures through hydrothermal treatment of calcite. A single crystal of calcite was applied to hydrothermal treatment in a phosphate solution at $160^{\circ}C$. Rod-shaped hydroxyapatite crystals with micrometer-size were formed on the {100} face of calcite after treatment, while nanometer-sized hydroxyapatite crystals were formed on the (111). The hydroxyapatite crystals formed on each plane were not morphologically changed with increasing treatment periods. An oriented structure of rod-shaped hydroxyapatite was constructed after hydrothermal treatment of {100} planes on the calcite single, while such orientation was not observed on the (111) plane after the treatment. The layer of hydroxyapatite formed on the {100} plane was thicker than that of the (111) plane. The {100} plane of calcite shows a higher reactivity than that of the (111) plane, which results in rapid crystal growth of hydroxyapatite. The difference in the morphology of the formed hydroxyapatite was governed by the reactivity of each crystal plane exposed to the surrounding solution.

• 한국응용과학기술학회지
• /
• 제34권3호
• /
• pp.545-554
• /
• 2017

이 연구는 국산화 한 액정형성 유화제에 대하여 선진사의 액정형성제를 사용하여 pH변화에 따른 안정성에 관한 것이다. 국산화한 액정유화제는 SugarCrystal-LC ((주)바이오뷰텍, 한국)를 사용하였고, 비교시료는 Nikkomulese-LC (니코캐미칼즈, 일본)와 Alacel-LC (Croda 캐미칼즈, 영국)를 사용하여 액정형성의 생성력을 실험하였다. 액정형성은 산성 (pH=4.2)에서, 중성 (pH=7.0) 그리고 알칼리성 (pH=11.7)에서 액정구조가 생성되는지 현미경으로 확인하였다. 또한 교반 속도에 따른 액정의 형성 입자를 편광현미경으로 관찰 하였다. 교반 시간은 모두 동일하게 3분 동안 Homo-mixer로 교반하였고, 교반속도는 2500rpm, 3500 rpm, 4500rpm으로 증가시켜 액정의 상태를 관찰하였다. 그 결과 한국산 계면활성제가 2종의 외국산 보다 안정하고, 선명한 액정구조가 형성되는 것을 알 수 있었고, 영국산의 경우 유화입경이 분균일하여 불안정한 상태를 보였다. 일본산의 경우, 한국산과 유사한 구조와 성능을 가지고 있음을 알 수 있었다. 한국산 계면활성제는 외국산과 비교하여 우수한 유화성능을 가지고 있음을 알 수 있었다. 응용분야로 국산화한 Sugar Crystal-LC 계면활성제를 사용하여 액정크림, 로션, 아이크림 등 다양한 제형개발이 가능하고, 화장품산업은 물론 의약품산업 및 제약산업에서 피부외용제의 유화기술로 폭넓게 응용이 가능할 것으로 기대한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.886-889
• /
• 2007

Photopolymerization and phase separation behavior during the PDLC formation process were investigated by simultaneous resistivity and turbidity measurement. Using this experimental method, we investigated the effect of liquid crystal structure on photopolymerization and phase separation behavior.

• Bulletin of the Korean Chemical Society
• /
• 제17권9호
• /
• pp.781-786
• /
• 1996

Mass transport behavior of C60 films on electrodes with different thicknesses has been studied by an Electrochemical Quartz Crystal Microbalance (EQCM) during electrochemical reduction-oxidation processes in the presence of water. C60 films were found to be reduced in the presence of water and they remains quite stable. In thin films, the mass on electrode decreased after a complete cycle while X-ray Photoelectron Spectroscopy (XPS) study does not support the existence or formation of C60-epoxides during electrochemical reduction processes in the presence of water or oxygen.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2839-2842
• /
• 2014

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.313-324
• /
• 2015

Austenitic stainless steels have been widely used in many engineering fields because of their high corrosion resistance and good mechanical properties. However, welding or aging treatment may induce intergranular corrosion, stress corrosion cracking, pitting, etc. Since these types of corrosion are closely related to the formation of chromium carbide in grain boundaries, the alloys are controlled using methods such as lowering the carbon content, solution heat treatment, alloying of stabilization elements, and grain boundary engineering. This work focused on the effects of aging and UNSM (Ultrasonic Nano-crystal Surface Modification) on the intergranular corrosion of commercial 316L stainless steel and the results are discussed on the basis of the sensitization by chromium carbide formation and carbon segregation, residual stress, grain refinement, and grain boundary engineering.

• 한국표면공학회지
• /
• 제53권6호
• /
• pp.312-321
• /
• 2020

Morphology of porous cobalt electro-deposits was systematically investigated as functions of cobalt precursors in the plating bath and applied cathodic current density with a special focus on cobalt nano-rod formation. It was proved that the concentration of cobalt precursor plays little effect on the morphology of cobalt electro-deposits at relatively low plating current density while it significantly affects the morphology with increasing plating current density. Such a dependence was discussed in terms of the kinetics of two competitive reactions of cobalt reduction and hydrogen evolution. Cobalt nano-rod structure was created at specific ranges of cobalt precursor content and applied cathodic current density, and its diameter and length varied with plating time without notable formation of side branches which is usually found during dendrite formation. Specifically, the nano-rod length was preferentially increased in relative short plating time (<15 s), resulting in higher aspect ratio of nano-rod with plating time. Whereas, both the nano-rod length and diameter were increased nearly at the same level in a prolonged plating time, making the aspect ratio unchanged. From the analysis of crystal structure, it was confirmed that the cobalt nano-rod preferentially grew in the form of single crystal on a dense poly-crystalline cobalt thin film initially formed on the substrate.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.5-8
• /
• 2009

MgO nanodots have been deposited and formed on top of the substrate surface. Mg was sputtered to form the MgO nanodots on the single crystal substrates by rf-sputtering method and followed by heat treatment in the oxygen ambient. The deposition and formation of MgO nanodots have been controlled systematically using the process variables such as substrate temperature, sputtering time, and rf-power. As the substrate temperature increased from the room temperature the density of MgO nanodots decreased. The optimal conditions of MgO nanodots formation using the rf-sputtering was investigated and the maximum density of more than $230/{\mu}m^2$ on single crystal substrates was obtained when the rf-power of 100 watts was applied for 30 seconds at room temperature. The typical size of MgO nanodots was identified to be <160 nm(diameter) and 4-30nm (height) by atomic force microscopy. The modulated surface morphology was examined through surface images and cross-section analysis and discussed for the artificial pinning sites in the superconducting films.

• 한국결정성장학회지
• /
• 제19권1호
• /
• pp.19-24
• /
• 2009

생체모방법을 이용하여 표면 처리된 titanium plates 표면에 아파타이트 형성에 관하여 조사하였다. 표면 처리방법으로는 우선, titanium plate 표면에 titanium oxide층을 형성시키기 위하여 열처리온도를 $400^{\circ}C$, $600^{\circ}C$, 그리고 $800^{\circ}C$에서 전기로에서 5시간 유지하였으며, 열처리된 titanium plates 1 M를 수산화나트늄 용액에 침전시켜 표면을 화학적으로 처리하였다. 생체모방법으로 titanium plates 표면에 아파타이트를 형성시키기 위하여 표면처리된 titanium plates 를 Kokubo's recipe에 의하여 제조된 생체유사액(SBF)에 침적시켰다. SBF 용액에 1주와 3주기간 동안 침적시킨 후, 표면처리를 달리한 titanium plates 표면에 형성된 코팅층을 서로 비교 분석하였다.