• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1659-1661
• /
• 2004

Measurement of supersaturation is important in crystallization processes, because it is one of key factors to control crystal size distribution and shape determining product quality. A monitoring system of the supersaturation using a quartz crystal sensor is applied to the supersaturation measurement. From the variation of resonant frequency, the beginning of the formation of salt crystal on the sensor surface is detected while the sensor is directly cooled down. The degree of supersaturation is computed from the solubility difference at the temperatures of the salt solution and the sensor. The performance of the propsed system of the supersaturation measurement is examined by applying the system to the crystallization of three different salt solutions. The experimental outcome compared with eye observation result and photographic analysis indicates that the proposed system is effective and useful to determine the supersaturation in the crystallization process. In addition, the microscopic monitoring of the initial stage crystallization is available with the sensor system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.141-144
• /
• 2005

[ $(Y_{0.5}Sm_{0.25}Nd_{0.25})Ba_2Cu_3O_y$ ] [(YSN)-123] high $T_c$ composite superconductors with $CeO_2$ addition were systematically investigated by top seeded melt growth (TSMG) process in air atmosphere. A melt textured $NdBa_2Cu_3O_y$ (Nd-123) single crystal was used as a seed for achieving the c-axis alignment large grains perpendicular to the surface of (YSN)-123 composite oxides. The size of $(Y_{0.5}Sm_{0.25}Nd_{0.25})_2BaCuO_5$ [(YSN)211] nonsuperconducting inclusions of the melt textured (YSN)-123 samples with $CeO_2$ addition were remarkably reduced and uniformly distributed within the (YSN)123 superconducting matrix except in the region very close to the Nd-123 seed crystal. The sample showed a sharp superconducting transition of 91 K.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.140-142
• /
• 2019

AlN (Aluminum Nitride) crystal which could be used to substrates for UV LEDs was grown by PVT ((Physical Vapor Transport) method. 3 inch AlN single crystal with a thickenss of 4 mm was grown using Polycrystalline seed for 120 hours. In this report, a result of 3 inch polycrystalline bulk AlN growth behavior using large size crucible and growth condition were reported.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.4
• /
• pp.141-147
• /
• 2018

Solar energy has attracted big attentions as one of clean and unlimited renewable energy. Solar energy is transformed to electrical energy by solar cells which are comprised of multi-silicon wafer or mono-silicon wafer. Monosilicon wafers are fabricated from the Czochralski method. In order to decrease fabrication cost, increasing a poly-silicon charge size in one quartz crucible has been developed very much. When we increase a charge size, the temperature control of a Czochralski equipment becomes more difficult due to a strong melt convection. In this study, we simulated a Czochralski equipment temperature at 20 inch and 24 inch in quartz crucible diameter and various charge sizes (90 kg, 120 kg, 150 kg, 200 kg, 250 kg). The simulated temperature profiles are compared with real temperature profiles and analyzed. It turns out that the simulated temperature profiles and real temperature profiles are in good agreement. We can use a simulated profile for the optimization of real temperature profile in the case of increasing charge sizes.

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.72-83
• /
• 1993

Abstract A new and versatile method for the preparation of biphenyl thioester series was studied in ferroelectric liquid crystal. Many of the resulting liquid crystal showed a ferroelectric chiral smectic C phase in addition to the chiral nematic and smectic A phase. We obtained a large spontaneous polarization exceeding $10^{-8}$C/c$m^2$ in new biphenyl thioester series. It was found that the size and polarity of the substituent in chiral carbon influenced the magnitude of spontaneous polarization. The series allow us to determine the influence of substituent size in the chiral carbon the existence and the stability of the Sc* phase.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.4
• /
• pp.176-179
• /
• 2001

Iron oxide powders were prepared under high temperature (up to $175^{\circ}C$) and pressure conditions( up to 129 pasi) by precipitation from metal nitrates with aqueous potassium hydroxide. Various types of iron oxide powders were obtained at different conditions. The size and the shape of the particles can be controlled as afunction of starting solution pH. The average particles size of the synthesized iron oxide powders increased, the particle shapes of the powders became fibrous, and the crystalline phase of the powder changes from iron oxide to iron hydroxide with increasing solution pH. The effects of synthesis parameters are discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.70-75
• /
• 1992

A model for a microstructural residual stress in a ferroelectric material is proposed. Based on this model, two facts are estimated. One of them is that the residual stress on a grain boundary is larger than that on a domain boundary. Another one is that the microstructural residual stress decrease with increasing grain size. These facts are confirmed by the microcrack morphology and the dependence of dielectric constant hysteresis between heating and cooling on grain size in $PbZr_{0.4}Ti_{0.6}O_3$ ceramics.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.120-125
• /
• 2002

Si-wafers for solar cells were cast in a size of $50{\times}46{\times}0.5{\textrm}{mm}^3$ by vacuum casting method. The graphite mold coated by BN powder, which was to prevent the reaction of carbon with the molten silicon, was used. Without coating, the wetting and reaction of Si melt to graphite mold was very severe. In the case of BN coating, SiC was formed in the shape of tiny islands at the surface of Si wafer by the reaction between Si-melt and carbon of the graphite mold on the high temperature. The grain size was about 1 mm. The efficiency of Si solar cell was lower than that of Si solar cell fabricated on commercial single and poly crystalline Si wafer. The reason of low efficiency was discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.134-138
• /
• 2012

Recently the preparation magnetic nanoparticles by a pulsed laser ablation in liquid has gained much attention because it is easy to control experimental parameters. Iron oxide magnetic nanoparticles have been prepared by a pulsed laser ablation of ${\alpha}-Fe_2O_3$ target in ethanol at different magnitude of laser energy of 1, 20, 40 and 80 mJ/pulse. It revealed that particle size increases with increasing laser energy. It could be concluded that 40 mJ/pulse is an optimum laser energy for the preparation of iron oxide nanoparticles with uniform size distribution. The nanoparticles are homogeneously dispersed in ethanol and their stability maintained for several months.

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.132-137
• /
• 2013

The liquid crystal form with phosphatidylcholine contents containing in the hydrogenated lecithin was confirmed. Composition ingredients of the liquid crystal vesicle were phospholipid, ethanol and water and the rosmarinic acid was encapsulated as index material. The mean particle size of the liquid crystal vesicle appeared to form various particles form 480 nm to $3{\mu}m$ depending upon the lipid composition and ultrasonic handling time. The liquid crystal vesicle compared with the liposome showed a very high encapsulation efficiency. The quantity of liquid crystal vesicle increased with respect to the increased quantity of lipid contents in the hydrogenated lecithin. The result from release experiments of the liquid crystal vesicle containing rosmarinic acid showed that the liquid crystal vesicle releases much less than that of liposome.