• 자원환경지질
• /
• 제53권6호
• /
• pp.755-769
• /
• 2020

2019년에 국내에서 채취된 골재에 대하여 광역시도별로 채취현황분석을 실시하였다. 2019년에 전국에서 채취된 골재는 약 1억3천4백만 ㎥로 이 중 모래는 약 4천1백만 ㎥, 자갈은 약 9천3백만 ㎥가 채취되었다. 골재원별로는 선별 파쇄골재(50.3%)가 가장 많이 채취되었으며, 산림골재(41.4%), 육상골재(3.3%), 바다골재(1.7%), 선별세척(1.7%), 하천 골재(0.7%) 순이다. 이는 선별파쇄골재와 산림골재가 국내 골재채취의 주생산지임을 말해준다. 권역별로 보면 경기도가 국내 골재 채취의 약 30%를 점하며, 그 다음으로 경상남도, 충청북도, 강원도, 경상북도, 충청남도의 순이다. 주로 채취되는 골재는 지역적으로 차이가 있다. 경기도는 선별파쇄골재가 가장 많이 채취되며, 경상남도는 산림골재가 가장 많이 채취된다. 또한 육상골재는 경상북도와 강원도에서 채취가 가장 많이 되는 등 지역에 따라 채취가 용이한 골재의 종류가 다르다. 2019년도 골재채취의 특징은 하천골재와 바다골재의 채취가 현저히 줄어든 반면 선별파쇄와 산림골재의 채취가 증가하여 전체 골재채취물량의 약 90%가 넘는다는 것이다. 따라서 골재자원의 향후 수급에 있어 선별파쇄와 산림골재에 우선적인 정책방향이 있어야 할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.443-446
• /
• 2005

Recently, according to increase use of concrete which is the main material of construction, the natural aggregate of good quality is more and more decreased. Most of all, among the concrete materials, the development of alternation materials of sand is urgently needed. In this study, investigating the production equipment and the sample of crushed sand company and analyzing properties of sand, manufactured mortar by the KS to use crushed sand as the fine aggregate of concrete material. The experiment result is as follows. 1. The density, an absorptivity, and the amount of 0.08mm passage ratio of crushed sand, and the mortar used crushed sand satisfied KS. The mechanical results is similar to sea sand. 2. The crushed sand which used impact crusher instead of cone crusher for 3rd or 4th crusher was similar properties to sea sand, so it is judged that impact crusher has high effect of particle shape improvement of crushed sand.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.12-17
• /
• 1996

It is true that aggregate strength is usually not a factor in normal concrete strength because, the aggregate particle is several times stronger than the matrix and the transition zone in concrete. In other words, with most natural aggregates the strength of the aggregate is hardly utilized because the failure is determined by the other two phases. But aggregate characteristics that are significant to concrete technology include porosity, grading or size distribution, moisture absorption, shape and surface texture, crushing strength, elastic modulus, and the type of deleterious substances present. Therefore, in the area of high strength concrete, concrete is much more influenced by properties of aggregate. This experiment is performed to investigate how kinds of aggregare influence on the workability of high strength concrete. In this experiment, four types of aggregate is used, that is crushed river aggregate, crushed stone, recycled aggregate of low strength and recycled aggregate of high strength. In this study, we scrutinize a fundmental study on the workability of high strength concrete according to kinds of aggregate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.50-53
• /
• 1992

The damages due to alkali-aggregate reaction between the reactive silicia constituents of the aggregate and the alkalies in cement have been frequently reported since 1923 in America . Recently alkali-aggregate reaction, especially alkali-silica reaction, can be found all over the area using crushed stones. The first research, in 1990, was performed to identify the alkali-silica reactivity of 18 sets of crushed stones used in domestic ready-mixed concrete plant as coarse aggregates by 4 petrollgical, chemical and mortar bar method, And the study was continued with 10 sets of crushed stones in this research. It was found that all the aggregates used in this study are innocuous at alkali-silica reaction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.941-946
• /
• 2001

In this study, three kinds of fine aggregate (river sand, sea sand, crushed sand) were used and four different s/a (38%, 40%, 42%, 45%) were applied separately to this experimental for get the conclusion written below. Regardless of kinds of fine aggregate and casting-curing condition, maximum unit weight is seen at 40% of s/a and also to be seen in case of crushed sand. It's for that specific gravity of crushed sand is bigger comparatively than river sand and sea snad's one. Compressive strength is measured river sand, crushed sand, sea sand by order of size ; Regardless of variation of s/3, casting-curing condition and age. Compressive strength recorded maximum when s/a is 42% whatever sort of fine aggregate are. As the result, according to references, the optimum s/a of underwater antiwashout concrete is 40% but in this study, from compressive strength of view, the optimum s/a of underwater antiwashout concrete is 42%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.969-978
• /
• 2010

In this study, a laboratory model test on utilization of recycled aggregates and crushed stone as vertical drains to use alternative material of sand in soft ground is performed. The vertical and horizontal coefficient of permeability of the recycled aggregates and crushed stone showed largely 1.2~4.0 times and 3.0~3.3 times greater than sand, respectively. Therefore, it showed enough to be an alternative material to the sand which had been being used as the vertical and horizontal drainage material before. The variations of pore water pressure with time showed constantly regardless of the load in all vertical drainage materials. When water level drops suddenly, the pore water pressure of the recycled aggregate and crushed aggregate is reduced to nearly zero. Therefore, it was applicable to the field because discharge capacity was similarity to that of sand. The settlement in crushed aggregates and recycled aggregate decreases gradually with the load increase. When water level drops suddenly, earth pressure in all drains materials was evaluated the equivalent drainage capacity similarity to sand because it show approaching the nearly zero.

• 콘크리트학회논문집
• /
• 제18권3호
• /
• pp.415-423
• /
• 2006

콘크리트용 골재로 양질의 골재가 부족함에 따라 대체 골재의 개발이 요구되어, 현재에는 대체 골재로서 부순모래가 가장 많이 사용되고 있으며, 그 사용량은 더욱 늘어날 전망이다. 국내에서는 대부분의 회사가 습식공정으로 부순모래를 생산하지만, 지역적인 조건과 부지의 제약에 의해서 건식 공정으로 부순모래를 생산하는 회사도 있다. 본 연구에서는 건식 공정 부순모래의 콘크리트의 적용성을 평가하기 위한 기초적인 연구로서, 건식공정으로 부순모래를 생산하고 있는 회사의 제조 설비를 분석하고, 부순모래를 대상으로 한국산업규격에 의거하여 품질특성 시험을 실시하였으며, 그 결과를 바탕으로 부순모래를 바다모래에 대체하여 콘크리트 실험을 실시하였다. 실험 결과, 건식 부순모래 품질 특성 중에서 0.08mm 체 통과량이 KS 규정을 초과하였으며, 조립률도 천연모래에 비하여 다소 높게 나타났고, 다른 물리적 특성은 바다 모래와 유사하였다. 콘크리트 실험에서는 부순모래의 대체율이 증가함에 따라 슬럼프와 공기량이 미립분량 증가에 의해서 감소하였으며, 단위용적질량, 압축강도, 인장강도는 증가하는 것으로 나타났다. 따라서 건식 부순모래의 미립분 함유량을 감소시키면 콘크리트용 골재로서 사용하는 데에는 큰 문제가 없을 것으로 판단되며, 향후 건식공정으로 생산한 부순모래의 사용량도 증대될 것으로 전망된다.

• 한국건축시공학회지
• /
• 제7권1호
• /
• pp.57-62
• /
• 2007

Generally, the strength of concrete depends on factors of materials, mix proportions, compaction, manufacturing methods and curing and so on. And recently, it has increased the using of crushed sand for concrete due to the exhaustion of good natural aggregate. In case of Korea, in 2004, the using ratio of crushed sand occupies about 28% of whole fine aggregate. This is an experimental study to compare and analyze the influence of W/B ratio and replacement ratio of crushed sand on the fluidity and compressive strength of high strength concrete. For this purpose, the mix proportions of concrete according to the W/B (31.5, 27.5, 23.5%) and replacement ratio of crushed sand (0, 20, 40%) was selected. And then air content, slump-flow, a-lot, compressive strength test were performed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.417-422
• /
• 2001

The purpose of this study is to investigate experimentally the workability, compressive and flexural strength properties of rapid-set concrete with various mixture. The kinds of fine aggregate(river sand, sea sand, crushed sand), water-cement ratio(40%, 45%, 50%), sand-aggrega to ratio(33%, 36%, 39%) were chosen as the experimental parameters. Test variables are temperature of concrete, slump, air contents, compressive and flexural strength. The compressive and flexural strength for 3 hours and 6 hours were tested. As result, it was shown that temperature of concrete involved 45$^{\circ}C$, some time later decreased. The workability were decreasing in steps as the sand-aggregate ratio increased and crushed sand was the highest value. Higher compressive and flexural strength was shown following the order of river sand, sea sand, crushed sand regardless of sand-aggregate ratio. But the values of gap was just a little.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.103-107
• /
• 1993

The Alkali Aggregate Reaction(AAR), reported first by T. E. Stanton in 1940, is a reaction between certain siliceous aggregate and hydroxyl ions present in the pore fluid of a concrete. The damage of concrete structures, deteriorated by AAR, have been reported since using the crushed stones caused by the exhaustion of natural aggregates. This study was performed to investigate the AAR of crushed stones using chemical analysis, polarization microscope, XRD, chemical method(KS F 2545, ASTM C 289), mortar bar method(KS F 2546, ASTM C 227) and Scanning Electron Microscope(SEM) and Energy Dispersive X-ray Analysis (EDXA) of reaction products by AAR in mortar bar.