• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2017-2022
• /
• 2008

The crude oil pump system is the equipment for transporting crude oil and it consists of 3 major components, a motor and an impeller which discharge underground crude oil, a pipestack that transmits the cooling oil and power, and a cooling oil unit & junction box that provides cooling oil and electric power. When considering the system characteristics that it has to be installed at a depth of deeper than 100 m, a design technology for the efficient control of the heat occurring at a conductor and motor is necessary and it is the essential factor for ensuring system durability. In this paper, therefore, cooling oil flow has been calculated to satisfy the limit value of the system temperature by analyzing heat flow considering the related losses such as loss of conductor, contact resistor loss at the conductor connection, and operation loss of motor. And the operation temperature has been set up based on the temperature of crude oil and the heat of motor and conductor. Also, a design for cooling of crude oil pump system has been proposed by calculating the operation pressure loss and selecting the capacity of a cooling oil pump and a heat exchanger.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.408-414
• /
• 2014

After drilling operations at the offshore plant to production to crude oil to high pressure. After that time the low pressured of pipe inside when the secondary produce so oil recovery is reduced. At that time injection sea water at the pipe inside through water injection pump that the device Increase recovery so to be research and development at many industry. So developing 3-stage water injection pump at the domestic company. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic. In this paper, a 2D finite element analysis is performed through the dynamics of the present study was the validation of the model.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.173-178
• /
• 2005

Recently. we interested in renewable energy due to cost increase of the crude oil, etc. In this study solar assisted hybrid heat pump system that uses the solar heat and air as heat source analyzed by experimentally.'rho system could runs at dual mode. One is thermal storage mode of solar energy at day time and the other is heat pump mode with low temperature air as heat source at night time. In case of setting temperature over the limited range. high temperature water heated at the solar energy collecting tubes supplied to the storage tank. As results. it is founded that the heat pump performance Is higher than general heat pump which using the only air as a heat source. The developed system could be used as main healing equipment for the panel heating for the residential house.

• 한국대기환경학회지
• /
• 제24권2호
• /
• pp.229-237
• /
• 2008

Hazardous air pollutants emitted from the oil refinery plant were surveyed from 1993 US and 2005 Korean TRI data. Toluene, xylene, methanol, MTBE and n-hexane, relatively large in amount of fugitive emission, are considered as candidates of newly designated HAPs in Korea. The sealed oil pump, one of equipments among fugitive sources in the crude oil distillation tower was examined for the estimation of amounts of annual HAPs emissions according to several calculation methods using registered emission factors. Emission rates showed to be decreased with following calculation factors; average emission factor>pegged emission factor>concentration emission factor>correlation equation. Annual emission amounts of benzene, toluene, xylene. ethyl benzene and nhexane from the distillation tower were estimated and amounts of these HAPs calculated with TVOC concentrations obtained from LDAR program and correlation equations showed only 6% of those from using concentration factors.

• 대한환경공학회지
• /
• 제33권6호
• /
• pp.405-412
• /
• 2011

국내 TCE에 의해 오염된 산업 공단내의 지하수 정화 방법으로 양수 및 처리(pump and treatment) 공법이 제안되었다. TCE 농도 0.6 mg/L 오염 지하수를 30년 동안 이 공법에 의해 처리하여 0.005 mg/L 이하 농도로 방류할 경우 그 과정에서 발생하는 환경 비용과 환경 편익을 전과정평가에 의해 산출하였으며 그에 따른 환경 영향 및 환경 효과를 분석하였다. 방류 지하수의 총량은 $2.96{\times}10^7m^3$이며 제거된 TCE의 총량은 최대 17.6 kg이었다. 환경 비용은 에너지의 소비, 자원의 소비, 대기, 수질 및 고형 폐기물 형태의 오염 물질의 배출량 등으로 산출되었으며 환경 편익은 정화된 지하수의 사용으로 얻어졌다. 환경 비용에 따른 환경 영향은 30년 동안 구동하는 pump에 의한 전력 사용, 발전을 위해 소모되는 석유, 석탄 등의 원자재의 소모, 방출되는 지구 온난화 및 산성 가스, 부영양화, 폐기물의 발생을 포함하며 토양/지하수 정화 공정 전과정평가 모델의 사용으로 정량화하고 전세계 일인당 소모 또는 배출하는 표준량으로 나누어 표준화하여 비교한 결과 산성비 원인 오염물 배출이 가장 심각하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권1호
• /
• pp.74-84
• /
• 1986

Ejectors, having no moving, lubricating and leaking parats, are widely used as marine pumps because of its high working confidence. For instance, uses in ships are stripping in crude oil tank, bilge discharge in engine room, ballast water pumping on are carrier, and brine discharge from fresh water generator. And it is also used as cooling water recirculating pump in boiling water type nuclear reactor and deep-well pump. It is not easy to determine the optimal dimension for designing each ejector agreed with its suggested performance condition, because complicated calculations must be repeated to obtain the maximum efficiency affected by flowrate ratio, head ratio, area ratio and so on. Therefore, it is considered that the CAD (Computer-Aided Design) for ejector is a powerful method for design according to the individual design condition. In this paper, a computer program for water ejector design is developed based on the previous paper on theoretical analysis and experimental results for water ejector. And from the theoretical approach, an equation for the working limit and an equation for determing the shape of throat are obtained. The validity of the present computer program is sufficiently confirmed through the comparison of the computed results with the main dimension of the previous manufactured water ejector. This program will be easily developed as the CAD for various kinds of ejectors, including steam ejector.

• 한국소음진동공학회논문집
• /
• 제24권6호
• /
• pp.462-469
• /
• 2014

After drilling operations at the offshore plant, crude oil is producted under high pressure. After that time, oil recovery is reduced, because the pressure of the pipe inside is low during the secondary produce. At that time injection sea water at the pipe inside through water injection pump that the device increase to recovery. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic at the domestic company. 2D model has reliability of analysis results for the uncomplicated model. Also element and the node the number of significantly less than in the 3D model. So, the temporal part is very effective. In addition, depending on the quality of mesh 3D is a real model and FEM model occurs error. So, user needs a lot of skill. In this paper, a 2D finite element analysis was performed through the dynamics analysis and the study model was validated.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.176-186
• /
• 1996

The phenomena of drag reduction using small quantities of a liner macromolecules has attracted the attention of many experimental investigations. On the other hand drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, pool and boiling flow, and to flow with cavitation which occurs pump impellers. But the research on dragreduction in two phase flow is not sufficient. The purpose of the present work is to evaluate the drag reduction by measuring pressure drop, void fraction, mean liquid velocity and turbulent intensity whether polymer additives a horizontal single and two phase system or not. Flow pattern of air-water two phase flow was classified by electrical conductivity probe signal. Velocities and turbulent intensities of signal were measured simultaneously with a Hot-film anemometer.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권3호
• /
• pp.143-150
• /
• 2009

선박의 주기관이나 발전기관 등 디젤기관에서 사용하는 연료유는 원유를 정제해서 사용하고 있다. 석유화학공업에서 원유로부터 양질의 고급 휘발유를 많이 생산하기 위하여 촉매를 사용하는 유동접촉분해(FCC) 방법을 채택하여 원유를 분리하고 있다. 유동접촉분해 시 촉매의 주성분은 Si와 Al이며, 그 외에 Fe, Zn, Ti 등의 기본금속과 알칼리 금속 및 Ce, Nd, Ni, V 등의 희유금속이 함유되어 있다. 만일 선박에 사용되는 연료유에 이러한 성분의 촉매가 많이 혼입되어 Al, Si, Ni, V이나 Fe 등의 성분이 과다하게 되면 기관 부속품 마모가 아주 심하게 되고, 기관전체를 사용하지 못하게 되어 대형 해양 선박사고가 발생 할 수 있다. 다시 말해, 이런 성분이 많이 함유된 연료유를 기관에 사용하는 경우 연료펌프, 연료분사밸브, 실린더라이너, 피스톤링의 마모가 심하게 발생하게 된다. 따라서 이러한 사고를 예방하기 위하여 사고 발생현황에 대한 정확한 원인을 규명하고 밝히는 것이 중요하다. 아울러 그 사고의 원인이 자연적인 마모, 경년변화인가 또는 외적인 요인에 의한 사고인가에 따라 보험 보상 대상여부가 판명될 수 있어, 연료유로 인한 사고 원인규명은 아주 중요한 업무이다. 본 논문에서는 연료유 관련 사고가 발생한 선박을 대상으로 사고유형, 사고원인 및 예방법에 대한 검토를 하고 향후 선박의 디젤엔진에서 저질연료유 사용에 따른 문제점을 개선하도록 제시하고자 한다.

• 한국분무공학회지
• /
• 제1권3호
• /
• pp.20-28
• /
• 1996

It is well known that drag reduction in single phase liquid flow is affected by polymer material, molecular weight, polymer concentration, pipe diameter, and flow velocity. Drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, pool and boiling flow, and to present cavitation which occurs in pump impellers. But the research of drag reduction in two phase flow is not sufficient. The purpose of the present work is to evaluate the drag reduction by measuring pressure drop, void fraction whether polymer is added in the horizontal two phase system or not. Experiment has been conducted in a test section with 24 m of the inner diameter and 1,500 mm of the length. The used polymer materials are two kinds of polyacrylamide[PAAM] and co-polymer[A611P]. The polymer concentration was varied with 50, 100 and 200 ppm under the same experimental conditions. Experimental results were shown that the drag is higher reduced by co-polymer rather than polyanylamide.