• The Journal of the Acoustical Society of Korea
• /
• 제19권6호
• /
• pp.3-9
• /
• 2000

The Bell King Songdok the Great tolls magnificient sound that would be a great vehicle which brings all beings to the Sutras. Since 693, there was a magic flute, MANPASIKJUK, which was in existence in Shilla Dynasty that could lull all the evil-wawes, such an plaques, storms, Droughts, Famines and even Enemies. Thus, a sound tube, MANPASIKJUK, was erected in the crown of the Bell Songdok the Great so as to be effective to emit the nominal frequency tone whenever the Bell tolls for the national prosperity and welfare the People. Therefore, the Bell makers tried to fine the transmissibility condition through the sound tubr, several times during 34 years, However, it seems to be unfinished. Ever since, all of the korean Brahman Bell have the sound tubes of MANPASIKJUK, but none is performed their own functions. Here, one of the way to let the function of the sound tube of MANPASIKJUK out in the Bell Songdok the Great is proposed. There are two steps: the 1st is to elongate 18cm to the present length 77cm to fulfill the transmissibility condition for the nominal frequency of sound is emitted through the corrected sound tybe. 2nd step is to rise to 95% of the emission of the tone of nominal frequency, so that an exponential hem with the flare constant 2.8m-1, length 2.259m and the radius of the mouth 1.772m is to be extended to the corrected sound tube.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1007-1013
• /
• 2004

A three-arch NATM tunnel with a total length of 53.5m has been constructed for a metropolitan subway station in Daejon, Korea. The tunnel, whose crown is located 22m below the ground, crosses the old Daejon station underneath. Since the tunnel comprises a very large section (10${\times}$28 m; largest in Korea), it shows complicated mechanical behaviors, especially near portal, due to its short length relative to width. As far as its construction step is concerned, the center tunnel is excavated with pre-excavated pilot tunnel, which is a unique feature of this tunnel (first in Korea) to secure safety during construction and prevent excessive settlements. The both side tunnels are then excavated along with the center tunnel. Since significant amount of settlement was predictable from the design stage, extensive monitoring was performed during construction. During excavation of the side tunnels, unexpected large settlements up to ${\~}$140mm (estimated 41.8 mm at design stage) was measured at the center tunnel. In this paper, we study the causes of this unusually large ground settlement. We believe that the extra-wide tunnel excavation increases the stress influence zone of portal in longitudinal direction and consequently add more settlements to the existing due to excavation and consolidation.

• Journal of Periodontal and Implant Science
• /
• 제38권2호
• /
• pp.199-206
• /
• 2008

Purpose: Variation in the morphology of gingival papilla may be determined by the shape and position of anatomic crown as well as contact area and embrasure form of individual teeth. However, periodontal biotype classification is regarded to be subjective because of the lack of definite criteria. In this study, we defined the objective parameters which constitute the periodontal biotype and measured their relationship. Materials and Methods: 109 of dental casts were prepared using three dimensional scanner and specialized reconstruction software, then acquiredvirtual models were sent to the 20 professional dentists to define the specific periodontal biotypes. Several parameters around periodontal structures were measured from the virtual models; facial surface area of the anterior tooth (AT), anterior papillary area (AP), proportion of the dento-papillary complex, clinical papillary length (PL), and clinical papillary angle (PA). Statistical analysis was performed to confirm the relationship among parameters. Results: Coincidence rate of periodontal biotype within observers was $63.77{\pm}16.05%$. Coincidence rate between observers was $76.15{\pm}16.43%$. Among the parameters measured, PL showed the most positive correlations and PA presented the most negative correlations. The parameter of the AP and PL of six maxillary anterior teeth showed significant correlation coefficient. Conclusion: Anterior papillary area and clinical papillary length would be objective parameters for determining the consistent periodontal biotypes.

• Journal of Forest and Environmental Science
• /
• 제38권4호
• /
• pp.275-283
• /
• 2022

A study was designed to investigate the pattern of sexual dimorphism in a plantation of Garcinia kola. Twenty trees were randomly selected for the study and have been observed to flower regularly. A total of 100 inflorescence were randomly collected from the crown of each tree and 500 flowers randomly assessed within the period of four (4) flowering seasons. Floral sex assessment was done visually and with a hand magnifying lens; floral morphometric measurements (i.e. pedicel and perianth length and breadth), inflorescence length, and breadth) was taken using a veneer caliper; number of flowers per inflorescence and inflorescence per twig was counted; while, data analysis was conducted on excel using analysis of variance and pairwise t-test comparison. Four floral sexes were identified in the G. kola plantation studied which were unisexual male flowers, unisexual female flowers, cosexual unisexual male flowers, and cosexual hermaphrodite flowers. Three tree sexes were identified viz: inconstant male, invariant female, and cosexual trees. The plantation was significantly sexually dimorphic in floral sex and phenotypic traits (i.e. pedicel and perianth size), and as well as sexually dimorphic in tree sex and reproductive phenotypic traits (i.e. inflorescence size, number of inflorescences per twig, and number of flower bud per inflorescence). The sexual system of the plantation was therefore trioecious with features suggestive of evolving dioecy through the gynodioecious pathway.

• The korean journal of orthodontics
• /
• 제29권2호
• /
• pp.165-181
• /
• 1999

Treatment mechanics should be individualized to be suitable for each patient's personal teeth and anatomic environment to get a best treatment result with the least harmful effects to teeth and surrounding tissues. Especially, the change of biomechanical reaction associated with that of the centers of resistance of teeth should be considered when crown-to-root ratio changed due to problematic root resorption and/or periodontal disease during adult orthodontic treatment. At the present study, in order to investigate patterns of initial displacements of anterior teeth under certain orthodontic force when crown-to-root ratio changed in not only normal periodontal condition but also abnormal periodontal and/or teeth condition, the changes of the centers of resistance for maxillary and mandibular 6 anterior teeth as a segment were studied using the laser reflection technique, the lever & pulley force applicator and the photodetector with these quantified variables reducing alveolar bone 2mm by 2mm for each of maxillary 6 anterior teeth until the total amount of 8mm and root 2mm by 2mm for each of mandibular 6 anterior ones until the total amount of 6mm. The results were as follows: 1. Under unreduced condition, the center of resistance during initial displacement of maxillary 6 anterior teeth was located at the point of about $42.4\%$ apically from cemento-enamel junction(CEJ) of the averaged tooth of them and kept shifting to about $76.7\%$ with alveolar bone reduction. 2. The distance from the averaged alveolar crest level of maxillary 6 anterior teeth to the center of resistance for the averaged tooth of them kept decreasing with alveolar bone reduction, but the ratio to length of the averaged root embedded in the alveolar bone was stable at around $33\%$ regardless of that. 3. Under unreduced condition, the center of resistance during initial displacement of mandibular 6 anterior teeth was located at the Point of about $43\%$ apically from CEJ of the averaged tooth of them and this ratio kept increasing to about $54\%$ with root reduction. But the distance from CEJ to the center of resistance decreased from around 5.3mm to around 3.3mm, that is to say, the center of resistance kept shifting toward CEJ with the shortening of root length. 4. A unit reduction of alveolar bone had greater effects on the change of the centers of resistance than that of root did during initial Phase of each reduction. But both of them had similar effects at the middle region of whole length of the averaged root.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권8호
• /
• pp.1053-1059
• /
• 2011

The objective of this study was to assess the teratogenic and embryotoxic effects of clomiphene citrate in mice. The pregnant mice were administered a single dose of clomiphene citrate at different concentrations i.e 1.0, 2.0, 4.0 and 6.0 ${\mu}g/g$ BW on day 8 of gestation. Fetuses recovered on day 18 of gestation were analyzed on morphological, morphometric and histological basis. Morphological observations showed defects like open eyelids, anophthalmia, fore and hindlimb micromelia, meromelia, amelia, sacral hygroma, hydrocephaly, hemorrhagic spots, kyphosis and clubbed feet. Morphometric analysis indicated a significant (p<0.001) reduction in fetal body weight, crown rump length, head circumference, eye circumference, forelimb and hindlimb lengths and tail size against controls. The histological observations showed brain defects like hydrocephaly, enlarged ventricles and undifferentiated neuroglial cells in cerebellum. Cleft palate, underdeveloped pharynx and atrophy of jaw muscles were the common anatomical defects of pharyngeal region. It is concluded that the concentrations of clomiphene citrate used during the present study proved teratogenic in mice fetuses.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제21권12호
• /
• pp.2073-2080
• /
• 1997

Recently, the plane strain puch stretching test(called PSST) has been developed and used successfully in the evaluation of the press formability of automotive steel sheets. In this paper, the optimum punch geometry of the original PSST tool was investigated by the FEM analysis. The puch length, crown and corner radius are chosen to be optimized according to the Taguchi's experiment technique with the $L_4$ orthogonal array.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.158-163
• /
• 1997

In this paper the tool geometry of the PSS test were optimized in order to assure the reliability of the test. Considering many factors for optimization of the tool geometry, computer-simulation technique using three-dimensional finite element method(FEM) was used. Three design variables -the punch length, punch crown and punch corner radius- are chosen to be optimized according to the Taguchi's experiment technique with the L9 orthogonal array. The optimum condition to ensure the plane strain mode over the overall area of the specimen was clarified. Moreover the simulation results are confirmed by experiment.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• 제1권1호
• /
• pp.13-19
• /
• 1971

The author has studied on 910 roentgenograms of lower second molars, which were taken by intraoral technic, and obtained the following results. 1. The development of crown of lower second molars was completed 8.25 years. 2. The formation of mesial and distal roots in full length on lower second molars was completed as follows: a. mesial roots 15. 07 years b. distal roots 15. 53 years 3. The formation of apical foramina of mesial and distal roots of lower second molars was closured as follows: a. apical foramen of mesial root 18.00 years b. apical foramen of distal root 18.79 years 4. As a general rule, the mesial roots were developed more earlier than distal roots.

• The Korean Journal of Mycology
• /
• 제10권4호
• /
• pp.177-180
• /
• 1982

Gaeumannomyces graminis var. tritici was first isolated from rice in 1981. Sheath rot of rice seedling in box culture for machine transplanting was produced by artificial inoculation of the causal organism. Especially sheath rot was developed from crown to leaf sheath above water level. Perithecia were usually formed in dead leaf sheaths and in PDA culture. They were black, globose, and immersed with obliquely erumpent neck. Asci were unitunicate with an apical ring and contained 8 spores. Ascospores were hyline, slender, $80{\sim}140\;um$ in length. Each spore showed $3{\sim}4\;septa.$ Based on morphological and cultura characteristics, the isolate from seeds was identified as Gaeumannomyces graminis (Sacc.) Arx & Olivier tritici J. Walker.