• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.103-110
• /
• 2018

This study was conducted to investigate the optimum irrigation method for propagation of cutting strawberry ($Fragaria{\times}ananassa$ Duch. cv. Maehyang) plantlet in summer season. The cutting strawberry plantlets were planted in 24-cell tray ($60{\times}34{\times}10cm$) filled with commercial mixed medium (Tosilee) and placed in semi closed-type small plastic tunnel. Each semi closed-type small plastic tunnel was treated as follows; control (non-treatment), over head irrigation (twice a day), capillary mats irrigation (twice a day), or fog irrigation (30 minutes turn on and 10 minutes off from 8:00 to 18:00). The strawberry plantlets were rooted during 8 days in the semi closed-type small plastic tunnel, and then plastic film was removed. Growth parameters, such as plant height, root length, number of primary roots, petiole length, leaf length, leaf width, crown diameter, SPAD, leaf area, fresh and dry weights of the shoot and root, were measured at 61 days after cutting. Relative humidity in tunnel was high in the order by fog irrigation, over head irrigation, capillary mats, and the control as 72.5, 56.3, 45.8, and 29% on average, respectively. However, the air temperature was similar in all treatments. On the 4 and 8 days, the rooting rate of strawberry plantlet was significantly higher in the over head irrigation and fog irrigation treatments. Plant height, petiole length, crown diameter, and leaf area were highest in the over head irrigation and fog irrigation treatments. In addition, fresh and dry weights of shoot were greater in over head irrigation and fog irrigation treatments than the others. Dry weight of root was differed significantly heaviest in the fog irrigation treatment. However, root length, no. of primary roots, SPAD value, and fresh weight of root were not significantly different in all treatments. These results indicated that growth and rooting for propagation of cutting strawberry plantlet 'Maehyang' were best achievement in the over head irrigation and fog irrigation treatments.

• Journal of Korean Society of Forest Science
• /
• v.36 no.1
• /
• pp.9-25
• /
• 1977

As a successive work of the variation studies of natural Pinus densiflora stands, some characteristics of individual trees of the three natural populations selected from the Kwang-won Province, the middle-east part of Korean peninsula, as shown in the location map, were investigated. And the statiscal differences between individuals within population, and between populations were analysed. Twenty trees from each population were selected for this study purpose. Doing this, those trees lagged in growth, usually showing poorer form, were eliminated. The results obtained are summarized as follows: 1. Though the average population ages had the ranage between 50 and 63, the growth of height or diameter was similar. Population No.9 is, however, considered to have better tree forms at glance. Population No.8 showed the heighest value not only in the clear-stem-length ratio. 0.53 but also in the crown-index 0.91. The higher value can be result from those trees having long lateral branches and relatively short crown height, meaning undesirable crown shape. In regard to the fine branchedness and the acuteness of branching angle, the population No.9. is considered to be a better one, whereas there was almost no difference in crown height among populations. 2. Checking the frequency distributions of the ratio of the clear-stem-height to the total height and the crown-indices, some difference between populations are considered. These might be attributed to the previous way of stand mangement which alters the density. 3. In the serration density, the average number of 54 per 1cm needle length, the significant differences exist between individual trees within population but not between populations. A few trees which extremly high serration density were observed. As in serration, so tendencies were in the number of stomata row and resin duct. 4. The population 8 had the resin duct index value of 0.074 as the highest which was twice or triple of the other ones. 5. The patterns of increasing process of the average 10-year-ring-segment were not similar till the 30 years of age, but beyond this, the tendency lines were aggregated. 6. Regading the average summer wood ratio, no diffrence between populations, but in the ranges, i.e. 23 to 30 in population No.8. and 16 to 36 in population No.9., with regad to the specific gravity of wood, there were hardly observed any difference between populations even in the ranges values. As the increase of tree ages, the increase of specific gravity was followed but the increasing patterns were not similar between populations. 7. No significant differences between populations in the average tracheid length and the range were detected. However, the length was increased according to the age increase. The increasing pattern was same between populations.

• Journal of Korean Society of Forest Science
• /
• v.44 no.1
• /
• pp.1-25
• /
• 1979

Six natural populations of Pinus densiflora S. et Z. as shown in the location map (Flg 1) were studied during 1978. The numerial pouplation codes, 13 to 18. The results of populations 1 to 12 were reported in previous papers. Following the study methods described before, 20 trees were sampled from each population and morpological characteristics such as stem forms, branching habit needle and wood properties investigated. The results are summerized as follows; 1. The mean stand ages were ranged from 36 to 97 of years. The growth performances of trees of population 14. 15 and 18 was similar, but 13, 16, and 17 seemed to be inferior more or less. 2. The ratios of clear bole length were 0.70 in population 18 as the highest but 0.28 for population 16 as the lowest. 3. The population 17 was considered to be a stand of the coarser branching habit having the crown index (The maximum crown diameter/the crown height) 158 though the branching angles were almost horizontal. 4. The differences were observed in the clear bole length ratios and crown-indices between population as shown In Fig. 3 and 4. 5. As to the serration density, number of stomata row and resin duct; the significant differences exist between individual trees within population and also between populations. 6. Population 18 shown resin duct index 0.119 as the maximum. 7. The patterns of diameter growth, based on the width of 10-year-ring segment unit(for example, the 1st segment denotes the with between pith center and 10th year ring and the 2nd one is from 11th to 20th ring and so on.), were alike among populations as shown in Fig 9. 8. Significant differences between population in mean summer wood percentage as well as in wood specific gravity was observed. The values of wood specific gravity were increased with the increase of ages in population 14, 18 however vice versa in population 13, 15, and 17. 9. The fiber length was mereased with the increased of age but no differences between populations as shown in Fig. 12.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.654-658
• /
• 2010

A FA (Lilium formolongi $\times$ Lilium asiatic hybrid) intersectional hybrid lily cultivar 'Orange Crown' was developed in 2007 at National Institute of Horticultural and Herbal Science (NIHHS), Rural Development Administration (RDA) of Korea. The cross and immature embryo rescue was conducted between female parents 'Migreen' (Lilium formolongi 'Raizan' $\times$ Lilium asiatic hybrid 'A61') and male parent 'A01-187' (L. asiatic 'A96-28' $\times$ 'Sanzio') by cut style pollination method at Suwon in 2001. It was preliminarily selected as 'FA04-27' in 2004. Multiplication, bulb production and characteristic tests were conducted from 2004 to 2007. The evaluation of characteristics and preference were surveyed at a lily flower show of NIHHS at Taean in 2007. 'Orange Crown' flowers in the late of June and grows more than 183 cm stem length. Flowers bloom upward-facing, a little spotted and orange (RHS, O24A) petals. The pollen of 'Orange Crown' was sterile.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.4
• /
• pp.15-29
• /
• 2021

Urban green spaces offer a variety of benefits to living things and humans. However, existing green spaces have been reduced and fragmented due to urbanization, and there is a limit to creating new large green spaces in densely developed cities. Street trees have fewer restrictions on land use, which can be a measure to secure green areas in cities. In Korea, excessive pruning is being done on some street trees for reasons such as blocking of building signboards, contact with electric wires, and restrictions on sidewalk widths. Therefore, it is necessary to quantitatively understand the relationship between the benefits provided by street trees and their structures to come up with an efficient and systematic planning and management plan for urban street trees. In this study, we quantitatively analyzed the relationship between the thermal comfort improvement by the shades of street trees and the vertical structure, planting environment, and types of street trees. To calculate the thermal comfort felt by human body, we calculated UTCI (Universal Thermal Climate Index) of each street tree. For the vertical structure of street trees, we used Terrestrial LiDAR and the point clouds of street tree's crown was sliced vertically at 1m intervals. We conducted a multiple regression analysis on the thermal comfort improvement using the variables we obtained from fields. As a result, in the case of a street tree's vertical structure, the lager the volume of tree's crown located 3-4m (β=0.298, p<.05) and 6-7m (β=0.568, p<.001) above clear length, the better the cooling effect. In addition, the thermal comfort improvement was assessed to decrease as the DBH increased (β=-0.435, p<.001). In general, the crown diameter and DBH are positively correlated, with a cooling effect occurring as crown diameter increases. In this study, the opposite result was obtained due to the small number of trees measured, so additional research is needed by increasing the number of tree samples. In the case of the planting environment, the effect of improving thermal comfort was higher in the shaded area of trees planted to the south (β=-0.541, p<.001). Since unsystematic management of street trees can deteriorate the function of them, quantitative evaluations of the vertical structure of street trees are required, which can provide specific measures for planning and management of urban street trees with thermal comfort effect.

• Journal of Animal Science and Technology
• /
• v.52 no.3
• /
• pp.237-244
• /
• 2010

In order to investigate the physiological properties of velvet antler of elk (Cervus e. canadensis) raised in Korea, antlers (n=378) were collected from deer in 8 provinces including Gyeonggi-do (n=53), Gangwon-do (n=49), Chungcheongbuk-do (n=62), Chungcheongnam-do (n=68), Jeollabuk-do (n=52), Jeollanam-do (n=15), Gyeongsangbuk-do (n=30) and Gyeongsangnam-do (n=49). The exterior characteristics (weight, length, girth and crown) of all antlers were measured, and 18 antler samples were randomly selected for measurement of interior characteristics such as specific gravity, capacity and diameter of cross section. The mean antler weight, length of the main beam and mean length of upper section were $4.87{\pm}1.79\;kg$, $83.7{\pm}13.2\;cm$ and $40.6{\pm}11.4\;cm$, respectively. Mean girth of the top, middle and base of the main beam were $27.1{\pm}5.9\;cm$, $22.1{\pm}3.6\;cm$ and $22.9{\pm}3.6\;cm$ respectively, indicating a slight narrowing in the middle of the antler. In each of the tines, the girth at the base was markedly thicker compared to the top. The depth of the crown at the top of the antler, and the average number of crowns and tines were $14.1{\pm}7.0\;cm$, $2.1{\pm}0.6$ and $3.0{\pm}0.5$, respectively. Although there was no significant difference in mean specific gravity between top and base, mean specific gravity of main beam tended to increase from top to base of the antler with decreasing capacity. Additionally, the inner diameter of the base of the antler was significantly reduced compared to that of the top, indicating a greater integumental thickening due to mineralization. Information on the morphological and physiological properties of elk antlers is scarce. Therefore, these results may be useful in providing basic information for the physiological properties of antler, and encourage further studies on antler morphology in other deer species showing species specific differences.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.461-471
• /
• 2006

In order to achieve a satisfactory esthetic result of periodontal surgery or implant in maxillary anterior area, periodontists must be aware of normal alveolar bone anatomy. The purpose of this study was to evaluate the relationship of alveolar bone morphology to tooth shape and form. 78(mean age : 25 yrs) periodontally healthy volunteers participated in this study. Two maxillary central incisor and one lateral incisor were selected to study. With minimal local anesthesia, gutta-percha cone inserted to labial gingival sulcus of selected teeth just after bone sounding with periodontal probe. Metal ball (4mm diameter) attached to palatal fossa of central incisor. Then, periapical radiograph was taken according to long cone paralleling technique. After film scan, labial alveolar bone profile reproduced along interproximal bone and apical ends of gutta-percha cones on computer screen. By utilizing computer program, the distance from height of interproximal bone to the labial bone crest in central incisor-central incisor and central incisor-lateral incisor area was measured and converted to real distance by using vertical length of metal ball on film. After measuring crown length & width of central incisor, the 10 individuals ranked lowest GW/L ratio (crown width/length ratio) and the 10 ranked highest were selected as having a long-narrow(group N), or a short-wide(group W) form of the central incisors. Means of the distance from height of interproximal bone to the labial bone crest of group N, W were calculated and compared by means of independent t-test. The results were as follows: 1. Mean distance from the height of the interproximal bone to the labial bone crest was $3.5{\pm}0.7mm$ between two central incisor, and $2.8{\pm}0.6mm$ between central and lateral incisor. 2. Mean GW/L ratio of group N was 0.57, and group W was 0.8. Mean distance from the height of the interproximal bone to the labial bone crest of group N was higher than group W in both measured area(measurements of group N, W were $3.9{\pm0.2mm$ and $3.5{\pm}0.2mm$ between two central incisor, $3.0{\pm}0.2mm$ and $2.8{\pm}0.2mm$ between central and lateral incisor), but there were no statistically significant differences when the groups were compared. Within the limits of the present study, there was a tendency that subjects with long-narrow teeth have more scalloped alveolar bone profile than subjects with short-wide teeth in upper anterior area, but no statistically significant differences were found.

• Journal of Embryo Transfer
• /
• v.30 no.1
• /
• pp.51-57
• /
• 2015

This study was aimed to determine the biometry of genital organs, incidence of gynecological disorders and pregnancy loss in Black Bengal goat (Capra hircus). Genitalia of 118 does were collected from local abattoirs. Biometric parameters of genital organs were measured and gross and histopathological examinations were carried out for detection of abnormalities. For gravid uterus, age of the fetus was determined by measuring crown-rump length. There was no significant difference in the length, width and weight of right and left ovaries (P>0.05). However, the number of follicles between left ($5.3{\pm}2.3$) and right ovaries ($7.4{\pm}2.7$) varied significantly (P<0.05). The mean length of right fallopian tube and uterine horn were not varied with those of left fallopian tube and uterine horn. The length of uterine body, cervix and vagina were $1.3{\pm}0.1cm$, $3.3{\pm}0.5cm$ and $6.8{\pm}1.3cm$, respectively. Overall, 29 (24.6%) genitalia had abnormalities. Fifteen genitalia (12.7%) had ovarian abnormalities including ovaro-bursal adhesions (6.8%), parovarian cyst (5.1%) and follicular cyst (0.9%). Uterine abnormalities were found in 12 genitalia (10.2%) and predominant uterine lesion was endometritis (6.8%) followed by adenomyosis (1.7%), hemorrhagic lesion on endometrial surface (0.9%) and cyst in broad ligament (0.9%). In addition, cyst in fallopian tube (0.9%) and vagina (0.9%) were recorded. The proportion of slaughtered pregnant goats was 15.3% (18/118). The pregnancy wastage was highest in the first month (50.0%) followed by second (33.3%) and third (16.7%) month. It can be concluded that ovaro-bursal adhesions, parovarian cyst and endometritis are the gynecological disorders of major concern in Black Bengal goat.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.73-77
• /
• 2004

The purpose of this study was to improve the ornamental value of Perilla frutescens var. acuta. The growth of Perilla frutescens var. acuta was significantly varied as according to light intensities. The plant height, crown width, petiole length, leaf length, leaf width, stem diameter, and chlorophyll content were the greatest with 30% shade treatment. All of growth characteristics decreased as increasing shading levels. The anthocyanin contents also decreased with 70% shading level. The leaf color turned from dark purplish red to deep yellowish green, and the growth rate and ornamental value were the lowest with 70% shading condition.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.6
• /
• pp.3-9
• /
• 2000

The Bell King Songdok the Great tolls magnificient sound that would be a great vehicle which brings all beings to the Sutras. Since 693, there was a magic flute, MANPASIKJUK, which was in existence in Shilla Dynasty that could lull all the evil-wawes, such an plaques, storms, Droughts, Famines and even Enemies. Thus, a sound tube, MANPASIKJUK, was erected in the crown of the Bell Songdok the Great so as to be effective to emit the nominal frequency tone whenever the Bell tolls for the national prosperity and welfare the People. Therefore, the Bell makers tried to fine the transmissibility condition through the sound tubr, several times during 34 years, However, it seems to be unfinished. Ever since, all of the korean Brahman Bell have the sound tubes of MANPASIKJUK, but none is performed their own functions. Here, one of the way to let the function of the sound tube of MANPASIKJUK out in the Bell Songdok the Great is proposed. There are two steps: the 1st is to elongate 18cm to the present length 77cm to fulfill the transmissibility condition for the nominal frequency of sound is emitted through the corrected sound tybe. 2nd step is to rise to 95% of the emission of the tone of nominal frequency, so that an exponential hem with the flare constant 2.8m-1, length 2.259m and the radius of the mouth 1.772m is to be extended to the corrected sound tube.