• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.335-349
• /
• 2017

Submerged breakwaters installed under the water surface are a representative coastal structure to prevent coastal erosion, and various types of submerged breakwaters have been proposed and discussed so far. Generally, submerged breakwaters make the complex wave fields due to abrupt change in water depth at the crown of the breakwater. In this study, wave heights and mean water level formed around a breakwater are examined numerically for three-dimensional permeable submerged breakwaters. OLAFOAM, CFD open source code, is applied in the numerical analysis, and the comparisons are made with available experimental results on the permeable upright wall and the impermeable submerged breakwater to verify its applicability to the three-dimensional numerical analysis. Based on the applicability of OLAFOAM numerical code, the wave height and mean water level distribution formed around the permeable submerged breakwaters are investigated under the formation condition of salient. The numerical results show that as the gap width between breakwaters decreases, the wave height in the center of the gap increases, while it decreases behind the gap, and the installing position of the breakwater from the shoreline has little influence on the change of the wave height. Furthermore, it is found that the decrease of the mean water level near the gap between breakwaters increases with decreasing of the gap width.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.3
• /
• pp.102-106
• /
• 2008

This study was carried out to evaluate the relationships between stand attributes and litterfall amounts in a 28-year old Quercus acutissima stand. Eighteen sampling plots of $20m{\times}20m$ were chosen and litterfall was collected from May 2005 to December 2006. There was no correlation between stand attributes(tree density, mean diameter at breast height, mean height, basal area) and litterfall amounts except for flower and miscellaneous litter for the study period. There were no significant relationships between leaf litter and basal area(r=0.02, 0.05; P=0.93, 0.83) and between leaf litter and tree density(r=-0.10, 0.05; P=0.85, 0.69). Also, leaf litter was affected neither by mean diameter at breast height(r=-0.08, 0.30; P=0.73, 0.22) nor by mean height(r=-0.24, 0.09; P=0.34, 0.70). Other litter amounts such as bark, branch, and acorn showed no relationships with the stand attributes (P>0.05). The lack of significant relationships between litterfall amounts and stand attributes could be due to the closed canopy with a complete crown cover in this mature oak stand.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.73-77
• /
• 2004

The purpose of this study was to improve the ornamental value of Perilla frutescens var. acuta. The growth of Perilla frutescens var. acuta was significantly varied as according to light intensities. The plant height, crown width, petiole length, leaf length, leaf width, stem diameter, and chlorophyll content were the greatest with 30% shade treatment. All of growth characteristics decreased as increasing shading levels. The anthocyanin contents also decreased with 70% shading level. The leaf color turned from dark purplish red to deep yellowish green, and the growth rate and ornamental value were the lowest with 70% shading condition.

• The Journal of the Korean dental association
• /
• v.48 no.11
• /
• pp.819-828
• /
• 2010

Activator is a removable functional appliance used for correcting the skeletal Class II malocclusion in children with the mandibular deficiency. Berlin standard activator modified from Andresen activator has following characters; do not cover the palatal surface for tongue space, relief on lingual surface of mandibular incisors and resin capping 1/3-1/2 of crown height on mandibular incisors for preventing labioversion of mandibular incisors, L-hook between maxillary lateral incisor and canine for anterior high pull headgear, relief on mandibular posterior bite block for differential eruption of posterior teeth. Two cases presented here had a mandibular deficiency and slight maxillary protrusion. First case (an 11-year-old girl) treated with Berlin standard activator and anterior high pull headgear for 13 months followed by fixed orthodontic appliance for another 29 months. Second case (a 12-year-old boy) treated with Berlin standard activator for 6 months followed by fixed appliance for another 24 months. Treatment results showed a significant improvement in sagittal skeletal and occlusal relationship without premolar extraction. Mandibular condyles were concentric in TMJ [ossa, and masticatory muscle activities were normalized after treatment. In the retention period facial harmony and occlusal stability was maintained.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.2
• /
• pp.65-71
• /
• 2002

The best environments such as crown density, temperature, light intensity and humidity have to be identified because these factors are strongly related to the growth and several physiological characteristics. The purposes of this study are \circled1 to collect basic data fer growth, \circled2 to identify the best growth environments. to achieve these purposes, oak, pine and mixed forest stands have been selected in this study. forest ginseng seeds were sown in these forest four years ago. Several environmental and growth factors have been surveyed. In general, mean tree age, DBH and average height are 20-25 years old, 14-17 cm and 7-9 m, respectively. The growths of forest ginseng grown in oak stand are better than those of pine and mixed stands.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.564-569
• /
• 2005

Usually, Steel pipe grouting method or cut and cover method has been applied to tunnel with very shallow overburden or it is situated in valley. However, in case of lack of overburden height to reinforcement tunnel crown which is very difficult to construction. Also, application of cut and cover method that do not consider surrounding site condition causes popular enmity generation and environmental damage. It is the best alternative method that reduces the amount of excavated soil and excavate tunnel under ground to solve these problems. The tunneling method using cover structure which is to prevent a tunnel from collapse because this method can be reduce excavation area and construct tunnel under ground after set a cover structure and backfill ground. In this study, to know more effective structure type, comparative analysis was performed to behavior characters of slab and arch type construction that can be used to cover structure. Also a 2D and 3D numerical analysis have been performed to verify the stability of ground during excavation. As the result, the tunneling method using cover structure that it can be good alternative method for tunnel with shallow overburden and it through valley

• Advances in Computational Design
• /
• v.1 no.1
• /
• pp.1-25
• /
• 2016

Domes are architectural and elegant structures which cover a vast area with no interrupting columns in the middle, and with suitable shapes can be also economical. Domes are built in a wide variety of forms and specialized terms are available to describe them. According to their form, domes are given special names such as network, lamella, Schwedler, ribbed, and geodesic domes. In this paper, an optimum topology design algorithm is performed using the enhanced colliding bodies optimization (ECBO) method. The network, lamella, ribbed and Schwedler domes are studied to determine the optimum number of rings, the optimum height of crown and tubular sections of these domes. The minimum volume of each dome is taken as the objective function. A simple procedure is defined to determine the dome structures configurations. This procedure includes calculating the joint coordinates and element constructions. The design constraints are implemented according to the provision of LRFD-AISC (Load and Resistance Factor Design-American Institute of Steel Constitution). The wind loading act on domes according to ASCE 7-05 (American Society of Civil Engineers). This paper will explore the efficiency of various type of domes and compare them at the first stage to investigate the performance of these domes under different kind of loading. At the second stage the wind load on optimum design of domes are investigated for Schwedler dome. Optimization process is performed via ECBO algorithm to demonstrate the effectiveness and robustness of the ECBO in creating optimal design for domes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.233-245
• /
• 1992

The purpose of this study was to evaluate the demensioal stability and wettability of several rubber impression materials. Impressions were made from a metal master die machined to stimulate five full veneer crown preparations symmetrically placed in an arch form. Cast from impressions were measured about ; 1) intrapreparation distance 2) lower base diameter 3) length. For comparing materials were formed against a smooth surface. The advancing contact angle of a saturated aqueous solution of $CaSO_4$ on the impression materials was measured after 1 minute. Mean contact angle were calculated and results were analyzed. Results were as follows : 1. As the intrapreparation distance, hydrophilic addition-cured silicone had the smallest change and condensation-cured silicone had the largest one. 2. As the lower base diameter, traditional addition-cured silicone had the smallest change and polyether had the largest one. 3. As the height, traditional addition-cured silicone had the smallest change and polyether had the largest one. 4. As the contact angle, polyether had the smallest change and condensation-cured silicone had the largest one.

• Structural Engineering and Mechanics
• /
• v.53 no.1
• /
• pp.73-87
• /
• 2015

In case of aircraft impact on nuclear containment structures, the initial kinetic energy of the aircraft is transferred and absorbed by the outer containment, may causing either complete or partial failure of containment structure. In the present study safety analysis of BWR Mark III type containment has been performed. The total height of containment is 67 m. It has a circular wall with monolithic dome of 21m diameter. Crash analysis has been performed for fighter jet Phantom F4. A normal hit at the crown of containment dome has been considered. Numerical simulations have been carried out using finite element code ABAQUS/Explicit. Concrete Damage Plasticity model have been incorporated to simulate the behaviour of concrete at high strain rate, while Johnson-Cook elasto-visco model of ductile metals have been used for steel reinforcement. Maximum deformation in the containment building has reported as 33.35 mm against crash of Phantom F4. Deformations in concrete and reinforcements have been localised to the impact region. Moreover, no significant global damage has been observed in structure. It may be concluded from the present study that at higher velocity of aircraft perforation of the structure may happen.

• Journal of Veterinary Science
• /
• v.21 no.6
• /
• pp.83.1-83.14
• /
• 2020

Background: Bovine and porcine teeth are often used in in vitro experiments as substitutes of human teeth. Objectives: The aim of the present study was to perform a comparative analysis of enamel morphology of permanent human, bovine and porcine teeth under the scanning electron microscope. Methods: As many as 10 human, 10 bovine, and 10 porcine teeth were studied. All the teeth were sectioned and the halves were randomly divided into 2 groups according to the examined tissue (vestibular enamel at the mid-height of the dental crown and in the cervical area). Human and bovine enamel was etched for 15 sec and porcine enamel for 30 sec. The scanning electron microscope analysis was performed. The length and width of enamel prisms were determined with the "Met-Ilo" 1.1 computer program. Results: All enamel samples revealed the same etching pattern-Silverstone's type 2. Bovine enamel showed a similar porosity and the amount of interprismatic enamel compared to human enamel while the amount and width of interprismatic enamel bands in porcine enamel were evidently greater. The shape of the porcine prisms was visually similar to human prisms, although dimensions were significantly different. However, bovine prisms differed in form and appeared to be distinctly elongated. Conclusions: Reported findings indicate that the results of experimental studies carried out on bovine and porcine enamel should not be compared with the results obtained on human enamel.