• Journal of the Korean Geotechnical Society
• /
• v.30 no.4
• /
• pp.21-34
• /
• 2014

This paper studies the time-dependent behaviors of tunnel and surrounding ground due to tunnel deterioration. In the first part, the literature on deterioration characteristics of tunnels was reviewed. In the second part, a numerical analysis was performed to investigate the behavior of concrete lining on the typical section of Korean high-speed rail tunnel (weathered rock) after determination of input variables related to deterioration impact. The result shows that the settlement at the crown of tunnel and surface ground increased up to 7.0% and 30.2% of the total settlements during construction stage, respectively, and the internal convergence reduction of 9.0 mm for concrete linings was generated within 30 years after completion of tunnel construction. Also the loosening height increased up to 2.55 times of tunnel height within 50 years, which is higher than that of Terzaghi's recommendation on ultimate state. Due to this process of extending zones, it is found that additional loads were applied to concrete lining with the axial stress about 3.20~3.66 MPa, which accelerates tunnel deterioration. Finally the quantitative design approach to evaluate time-dependent behavior of lining and surrounding ground due to tunnel deterioration was proposed.

• The korean journal of orthodontics
• /
• v.43 no.5
• /
• pp.225-234
• /
• 2013

Objective: The purpose of this study was to classify Korean young adults into 3 groups on the basis of upper incisor exposure rates (UIERs) and to compare the skeletal, dental, and soft tissue variables. Methods: Samples were obtained from 127 students at the College of Dentistry, Wonkwang University in South Korea. Facial photographs of frontal posed smiles and lateral cephalograms of the subjects were taken. The subjects were divided into 3 groups on the basis of UIERs and 20 measurements were compared among the 3 groups. The correlations between the variables were determined. Results: Male and female subjects showed significant differences in the group distribution. Male subjects showed higher frequencies of low smiles, and female subjects showed higher frequencies of high smiles. The vertical height of the anterior alveolar process of the maxilla directly correlated with the UIER. However, the UIER showed no significant correlation with the vertical height of the anterior basal bone or the inclination of the upper incisor axis. In female subjects, the upper central incisor clinical crown length showed an inverse correlation with the UIER. However, this variable showed no significant correlation with the UIER in male subjects. Conclusions: The UIER was directly correlated with the levator muscle activity of the upper lip and inversely correlated with the upper lip thickness, yet there was no correlation between the UIER and upper lip length at rest.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.5
• /
• pp.407-410
• /
• 2001

This study was conducted to determine the optimal planting distance in cultivation of yacon (Polymnia sonchifolia Poeppig ＆ Endlicher). Plug seedlings were planted with 6 different plant densities of 80 $\times$ 60, 80 $\times$ 50, 70 $\times$ 50, 70 $\times$ 45, 70 $\times$ 40 and 60 $\times$ 45 cm. The plant height and the petiole length were increased with increasing the planting distance. The tallest plant height of yacon was 165.4cm with the plant density of 80 $\times$ 60 cm. However, branch number per plant, leaf number on main stem and stem diameter were not significantly difference among planting densities. Tuberous root was harvested 31.42 tons/ha in 70 $\times$ 50 cm spacing. The ratio of heavier tuberous roots than 200 g to total tuberous roots decreased significantly according to increase of planting density. Fresh weights of shoot and root, contain the crown bud, were decreased, as planting distance was shorter. Tuberous root number was fewer but its weight was heavier in wide planting than in dense planting. We think that optimal planting density is about 30,000 plants/ha, if it were to be 70 cm row spacing, intrarow spacing should calculate about 47cm.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.4
• /
• pp.41-49
• /
• 2012

The objective of this study is to investigate the characteristics of the location and prospects of the bear shelves built by Asiatic black bears in the Jirisan National Park. Previous researchers have been analyzed bear shelves in terms of places for resting and eating, but we are going to analyze based on the prospect-and-refuge theory. Characteristics of the sites of bear shelves are measured through field survey and topographic analysis by using digital elevation model (DEM). The normalized difference vegetation index (NDVI) is used to evaluate the optimum location of bear shelves in terms of crown density. Man-made objects are identified by viewshed analysis based on geographical information system (GIS). Findings of this paper can be summarized as follows. First, most bear trees are located deep inside of the mountainous national park, slopes of 30~40 degrees, altitude of 400~1,200m, and relatively low vegetation density with NDVI value of 0.4~0.6 compared to the average NDVI of the park. Second, the average height of bear shelves is 12.44m, or 74% of the average height of bear trees. They are located at suitable places to observe nearby trails and other park facilities. Third, man-made objects within the 100m radius of bear trees include lodge, bear training center, beekeeping camp, and hiking trails. Thus we may temporarily conclude that one of the main criteria of the bear tree selection in the park has been to identify optimum places for the monitoring of human activities in their habitat.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2002

This study was to investigate the productivity of 30-year-old Quercus mongolica forest in the Experimental Forest of Seoul National University located in Mt. Taehwa, Kyonggi-do, Korea. Eight sample trees were selected and cut off. Stem, branches and leaves were weighed respectively with the stratified clipping method, and analyzed for productive struts lure. The allometric regression equations between dry weight of each component(stem, branches, and needles) and D$^2$H were obtained. The results obtained are summarized as follows; (1) Photosynthetic layer of Quercus mongolica was shown at about 4m in height, and maximum needle amount of crown at 10m in height. (2) The total biomass of aboveground was 67.886ton/ha(75.5% from stem, 19.4% from branches and 5.1% from needles). (3) Annual net production of aboveground was 12.76ton/ha/yr, and the ratios of stem, branches and needles to that of aboveground, 44.1%, 28.7% and 27.2%, respectively.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.76-85
• /
• 2010

Purpose: This study aimed to evaluate the effectiveness of the modified sinus floor elevation technique described hereafter as a "hybrid technique," in 11 patients with severely resorbed posterior maxillae. Methods: Eleven patients who received 22 implants in the maxillary premolar and molar areas by the hybrid technique were enrolled in this study. A slot-shaped osteotomy for access was prepared on the lateral wall along the lower border of the sinus floor. The Schneiderian membrane was fully reflected through the lateral slot. Following drilling with the membrane protected by a periosteal elevator, the bone was grafted. All implants were placed simultaneously with sinus augmentation. The cumulative success rate was calculated and clinical parameters were recorded. Radiographic measurements were performed. Results: All implants were well maintained at last follow up (cumulative success rate=100%). The mean residual bone height, augmented bone height, crown-to-implant ratio, and marginal bone loss were $4.1{\pm}1.64mm$, $8.76{\pm}1.77mm$, $1.21{\pm}0.34mm$, and $0.34{\pm}0.72mm$, respectively. Conclusions: Simultaneous implant placement with sinus augmentation by hybrid technique showed successful clinical results over a 2-year observation period and may be a reliable modality for reconstruction of a severely resorbed posterior maxilla.

• Journal of People, Plants, and Environment
• /
• v.24 no.2
• /
• pp.219-227
• /
• 2021

Background and objective: Urban street trees play an important role in carbon reduction in cities where greenspace is scarce. There are ongoing studies on carbon reduction by street trees. However, information on the carbon reduction capacity of street trees based on field surveys is still limited. This study aimed to quantify carbon uptake and storage by urban street trees and suggest a method to improve planting of trees in order to increase their carbon reduction capacity. Methods: The cities selected were Sejong, Chungju, and Jeonju among cities without research on carbon reduction, considering the regional distribution in Korea. In the cities, 155 sample sites were selected using systematic sampling to conduct a field survey on street environments and planting structures. The surveyed data included tree species, diameter at breast height (DBH), diameter at root collar (DRC), height, crown width, and vertical structures. The carbon uptake and storage per tree were calculated using the quantification models developed for the urban trees of each species. Results: The average carbon uptake and storage of street trees were approximately 7.2 ± 0.6 kg/tree/yr and 87.1 ± 10.2 kg/tree, respectively. The key factors determining carbon uptake and storage were tree size, vertical structure, the composition of tree species, and growth conditions. The annual total carbon uptake and storage were approximately 1,135.8 tons and 22,737.8 tons, respectively. The total carbon uptake was about the same amount as carbon emitted by 2,272 vehicles a year. Conclusion: This study has significance in providing the basic unit to quantify carbon uptake and storage of street trees based on field surveys. To improve the carbon reduction capacity of street trees, it is necessary to consider planning strategies such as securing and extending available grounds and spaces for high-density street trees with a multi-layered structure.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.73-84
• /
• 2015

Comparison of the standard and instruction for grade and quality of landscape plants between Korea and foreign countries indicates that the individual country characteristically develops and uses their own standards for landscape plants. Ultimate aim of these regulations is to develop the standard of landscape plants classified by kinds, types and purposes to improve the quality of landscape plants. This study analyzed the differences of standards and instructions for landscape plants between Korea and other countries such as Germany, Switzerland, America, Canada and Japan. Our results indicated that Korea and Japan used the diameter at 1.2m above from ground surface for the diameter at breast height(DBH) whereas Germany and Switzerland at 1.0m above from ground surface. In case of America and Canada, the standard of landscape plants included crown width, height and DBH of plants. In Germany, the standard for creeping plants and herbaceous flowers was determined by the type and the root size of plants with the standard of containers(seven to eleven types). This research would be helpful for developing the practical and environmentally suitable guideline for the grade and quality of landscape plants and also for developing the standardized distribution structures and cultivation techniques for landscape plants in Korea.

• Korean Journal of Environment and Ecology
• /
• v.34 no.5
• /
• pp.425-435
• /
• 2020

This study aims to investigate the impact of the physical structure, such as altitude, slope gradient, slope direction, and topographical structure, and the vegetation pattern, such as existing vegetation, diameter of breast height (DBH), and crown density, on climate. The analysis results showed the significant difference in relative humidity, wind speed, and solar radiation at varying altitudes, the significant difference in all climate factors except for the wind speed at varying slope gradient, and significant difference in temperature and relative humanity at varying slope direction. The topographic structures were divided into valleys, slopes, and ridges. They were found to differ in relative humidity. However, the differences between constant trends and types were found to be insignificant concerning temperature, wind speed, and solar radiation. Significant differences in temperature, relative humidity, and wind speed were recorded with changing existing vegetation. The DBH showed a significant difference in temperature, wind speed, and solar radiation. The crown density showed a significant difference in temperature and solar radiation. The result of the relationship analysis for the analysis of the effect of vegetation pattern and physical structure on the meteorological environment showed that temperature was affected by slope gradient, slope direction, DBH, and crown density. The relative humidity was correlated with the altitude, slope gradient, slope direction, and topological structure in physical structure and the existing vegetation and crow density in vegetation pattern. The wind speed was correlated with the altitude, existing vegetation, and DHB, and the solar radiation was correlated with the slope gradient, DHG, and crown density. The crown density was the most overall significant factor in temperature, relative humidity, and solar radiation, followed by the slope gradient. DBH was also found to be highly correlated with temperature and solar radiation and significantly correlated with wind speed, but there was no statistically significant correlation with relative humidity.

• The Journal of the Korean dental association
• /
• v.48 no.8
• /
• pp.615-620
• /
• 2010

Purpose: The short dental implant is considered as possible solution in the alveolar bone height deficient cases. The aim of this study was to evaluate clinical availability of short implants by measuring the marginal bone loss of short length implants and comparing with that of conventional length implants. Materials and Methods: The groups were composed of patients who had received at least one implant. The samples of this study were selected from patients who with functional loading after prosthetic treatment for 1 year follow up period. The implants with a length of 5.7 mm and 6mm were considered short. (Bicon Dental implants, USA). The experiment group was composed of $4.5{\times}6mm$, $5{\times}6mm$, $6{\times}5.7mm$ implants (total 18 implants were placed in 14 patients, 8 on maxilla, 10 on mandible). The control group was composed of $4.5{\times}8mm$, $5{\times}8mm$, $4.5{\times}11mm$, $5{\times}11mm$. All implants were selected only by implants placed on molar area. We evaluated marginal bone loss in radiographic images at baseline (implant loading) and 3, 6, 12 months after loading. Additionally, crown-to-implant ratio was evaluated, and marginal bone loss according to crown-to-implant ratio after functional loading was analyzed. Results: The short implant group had a mean marginal bone level of $-0.52{\pm}0.69mm$; the 8mm group, $-0.22{\pm}0.82mm$; and the II mm group, $-0.10{\pm}1.09mm$ after I year of functional loading. But significant differences were not detected between three groups at every follow-up period. Crown-to-implant ratio in short implant group was $1.55{\pm}0.23$; 8mm group was $1.15{\pm}0.18$; and 11mm group was $0.92{\pm}0.15$. Additionally, significant differences between three groups were founded. (P<.0001) The greatest marginal bone loss after 1 year follow-up was founded at crown-to-implant ratio 1~1.49 range in short implant. Conclusion: The marginal bone loss of short implants was comparable to that of long implants. So, the short implants can be a clinically acceptable option.