• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.412-421
• /
• 2018

The objective of this study was to analyze the effects of forest management activities on canopy fuel characteristics for Pinus densiflora stands in South Korea. We used 1,085 managed stands data and 349 unmanaged stands data of the National Forest Inventory for this study, and it was estimated by using the Weibull function for the growth of stand and canopy fuel characteristics. Comparing the canopy fuel characteristics for the managed stands and unmanaged stands shows that the average canopy fuel load is about 14% higher than that of managed stands, and the canopy bulk density is also approximately 16% higher. The results of comparing growth projections for 40 years, 50 years and 60 years with the Weibull function are as follows: Over time, managed stands was predicted the maximum number of medium and large class diameter, while unmanaged stands was predicted maximum number of small and medium class diameter. From a fire fuel perspective, unmanaged stands are predicted to be of the type small class diameter and high density, which is a good condition for crown fire. In addition, Canopy fuel load, Canopy bulk density is relatively higher than managed stands, indicating that the possibility of high crown fire hazard.

• Journal of Forest and Environmental Science
• /
• v.32 no.4
• /
• pp.377-383
• /
• 2016

We obtained a total of 36 GPS coordinates of the seven bat species of Rhinolophus ferrumequinum, Myotis ikonnikovi, M. nattereri, M. petax, Murina ussuriensis, Plecotus auritus, and Pipistrellus abramus. Characteristics of forests (forest type, age class, DBH class and crown density), terrain (aspect, slope and distance from mountain stream) and disturbance factors (distance from human residential areas and distance from cultivated areas) that bats have used as their habitats were revealed from the GIS analysis based on GPS coordinates of the 36 positions that bats were found. The bats-preferred forest type is broad-leaf forests (43%) with the trees of the 2th (31%) and 5th (31%) age class, the trees of sapling (36%) and large DBH class (31%), and sparse crown density (67%). Bats prefer the slop direction of the east (39%), the gradient below $15^{\circ}$ (61%), the ranges within 200 m from the mountain streams (92%), the ranges within 200 m near roads (89%), the ranges of 200-400 m from human residential areas (28%), and the ranges within 200 m from cultivated areas (36%).

• Geomechanics and Engineering
• /
• v.30 no.6
• /
• pp.517-524
• /
• 2022

Every year, millions of waste tires are discarded across the world. Storage of waste tires presents many problems such as fire threats, epidemics, and non-economic factors. Furthermore, the disintegration process of waste tires is not economical or practical due to its time-consuming, and disposal requirements. In this study, half-section waste tires (HSWTs) were integrated with high-density polyethylene (HDPE) pipes under different relative density conditions. The main aim of the study was to reduce the deformation values of embedded HDPE pipes in sandy soil and to evaluate the soil-pipe interaction. In comprehensive laboratory tests, half-section waste tires were integrated in two different ways: in the middle of the pipeline and along the pipeline. Accordingly, it was concluded that the effectiveness of waste tires reduces the deformation and bending moment values in the critical regions of pipes. As a result of reinforcement in the mid-point of the pipe defined as the most critical region, 52% and 36% less deformation was observed in the crown and springlines of the pipe, respectively. In addition, the bending moment values for the same critical section were determined to be 40% less in the crown and 28% less in the springline regions of the pipe.

• Journal of Environmental Science International
• /
• v.32 no.5
• /
• pp.395-401
• /
• 2023

In this study, 12 environmental factors were used to evaluate the potential habitat of Pteromys volans living around some development areas. The analyzed value ranged from 0 to 20.1, and the area with a score of 10 or less was analyzed to have a low possibility of inhabiting Pteromys volans. To verify the analyzed results, a field survey was conducted on areas with 10 or more scores, and traces of habitat of Pteromys volans were confirmed in areas with 16 or more scores. All the areas with an evaluation score of 16 or higher showed high crown density and age class. However, despite the high crown density and age class, the evaluation score in some areas was low owing to the influence of other environmental factors. Therefore, in evaluating Pteromys volans habitats, it is necessary to apply various and complex criteria suitable for field conditions rather than applying uniform and fragmentary environmental factors only.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.161-168
• /
• 1999

A series of centrifuge model tests were performed in order to investigate the behaviors of various tunnel linings. A 1/100-scaled aluminum and hydrostone horseshoe tunnel linings with a radius km, height km were buried in a depth of C/D=3 with dry Joomunjin standard sand, the relative density of which was 86%. Bending moments and thrusts along the tunnel circumference were measured by 12 strain gages. Earth pressures in soil and on lining were estimated by pressure transducers, ground surface settlements at center and edges by using LVDTs. Average Ko(coefficient of earth pressure at rest) was 0.39 for the model sand. The structural behaviors of lining depended on its damaged conditions. But, as a rule, on the crown, the tensile circumferential strain of lining occurred at the inner surface, and the compressive at the outer surface, then positive bending moment was created at the crown. The circumferential strain of the inner surface on the springline was tensile, and the outer compressive, so negative bending moment was measured at the springline. For hydrostone linings, cracks initiated at the inner surface on the crown, and the outer on the springline over average 40g.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.3 s.53
• /
• pp.52-57
• /
• 2004

Content of chlorine in s쇼rene-DVB copolymer was decreased as crosslink increased and it is because as crosslink increased $1\%,\;2\%,\;5\%\;and\;10\%$ DVB content increased and crosslink density increased and cavity was reduced. Functional group of resin almost disappeared as C-C1 peak around $700cm^{-1}$ was substituted with 1-aza-12-C-4 macrocyclic ligand and new peak of C-N around $1020cm^{-1}$ appeared, so it was confirmed that styrene-DVB copolymer and ligand were compounded. As crosslink increased in the analysis of element contents, it resulted in the reduction of nitrogen content and it is because as crosslink increased, it led to the reduction of chlorine content in the process of substitution reaction and it affected macrocyclic ligand substituted. Form of functional synthetic resin showed distortion of its particles as macrocyclic ligand was introduced to styrene-DVB copolymer and hydrogen of ligand caused substitution with chlorine element of styrene molecule.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1973-1976
• /
• 2008

Electronic photodepletion spectrum of dibenzo-18-crown-6 with a potassium ion ($K^+$-DB18C6) was obtained in the gas phase using electrospray ionization and quadrupole ion-trap reflectron time-of-flight mass spectrometry. The spectrum exhibited rather a broad absorption band at 36350 $cm^{-1}$, which was tentatively assigned as the origin of the S1 band. The photodepletion spectrum of $Cs^+$-DB18C6 was also obtained to elaborate the effects of metal cations on electronic and geometric structures of metal cation-DB18C6 complexes. We found that the S1 band of $Cs^+$-DB18C6 was red-shifted by 180 $cm^{-1}$ from that of $K^+$-DB18C6. With the results of quantum theoretical calculations using the density functional theory, we suggested that the red-shift arose mainly from weaker binding of $Cs^+$ to DB18C6 than that of K+, which resulted from a larger size of $Cs^+$ than that of the cavity in DB18C6.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.8
• /
• pp.847-854
• /
• 2007

The battery electrode of a mobile phone is made of layered polymer coated on aluminum foils and the hot rolling process is applied to increase the density per volume of an electrode for a high capacity battery. The flatness of batteries surfaces should be less than $2{\mu}m$. To satisfy the required flatness, the deformation of roll surface due to bending and heating of the roll should be minimized. Complicated hot oil paths of $100^{\circ}C$ inside the roll are required for heating the polymer layers. FEA was used to calculate thermal deformations and temperatures distributions of the roller. Based on FEA, a modified surface curvature called a crown roll was suggested and this gave the area of 30% improved flatness compared with a flat roll. The flat roll satisfied the flatness of $2{\mu}m$ in the length of 340 mm and the crown roll resulted in the longer length of 460 mm. Experiments to measure the temperature distribution and thermal strain were performed and compared with FEA. There were only 6% difference between two results.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.446-452
• /
• 2014

This research aimed to provide a method to estimate growing stock and carbon stock using the characteristics of forest type map such as the age-class, DBH class and crown density class. We transformed the growing stock data of national forest inventory (mainly Kangwon-do province) onto those of time when the forest type map was established. We developed a simulation model for the growing stock using the transformed data and the characteristics of forest type map by the quantification method I. By comparing partial correlation coefficient, we found that quantification of growing stock was largely affected by age-class followed by crown density class, forest type and DBH class. The growing stock, was estimated as minimum in the broadleaved forest with age-class II, DBH class 'Small', and crown density class 'Low' as $20.0m^3/ha$, whereas showed maximum value in the coniferous forest with age-class VI, DBH class 'Large', and crown density class 'High' as $305.0m^3/ha$. The growing stock for coniferous, broadleaved, and mixed forest were estimated as $30.5{\sim}305.0m^3/ha$, $20.0{\sim}200.4m^3/ha$, and $23.8{\sim}238.1m^3/ha$, respectively. When we compared the carbon stock by forest type, the carbon stock by age class based on growing stock was maximum when DBH class was 'Large' and crown density class was 'High' regardless of forest type. This estimation of growing stock by using characteristic of forest type can be used to estimate the changes in growing stock and carbon stock resulting from deforestation or natural disaster. In addition, we hope it provide a useful advice when forest officials and policy makers have to make decisions in regard to forest management.

• Journal of Korean Society of Forest Science
• /
• v.111 no.3
• /
• pp.385-393
• /
• 2022

The study was carried out in Pocheon-si, Gyeonggi-do from March to December in 2019 to compare and analyze the water use strategies of two co-occurring tree species, Pinus densiflora and Quercus serrata, both native and dominant in Korea's forest ecosystems. Through seasonal changes, we measured environmental variables such as air temperature, relative humidity, precipitation, net radiation, and soil water content. Sap flow densities of P. densiflora (n = 6) and Q. serrata (n = 3) were measured, along with environmental variables. The maximum sa pflow density for Q. serrata almost doubled that of P. densiflora during the growing season, while the maximum sap flow densities in both Q. serrata and P. densiflora peaked in September and August, respectively. Net radiation and vapor pressure deficit, but not air temperature, were the major environmental variables significantly affecting sap flow density. Analysis of hysteresis revealed that P. densiflora exhibited isohydric behavior, while Q. serrata showed anisohydric behavior. Analysis of crown conductance revealed similar trends as sap flow density, i.e., the crown conductance of Q. serrata was twice that of P. densiflora during the growing period. The study compared and analyzed the water use strategies between two co-occurring species. To better understand the underlying mechanisms of water use, more research on both physiological and morphological traits are needed.