• 한국안전학회지
• /
• 제15권4호
• /
• pp.78-87
• /
• 2000

The $\gamma$-ray irradiation and aging effects on electrical characteristics of $^{60}Co$ $\gamma$-ray irradiated ethylene-propylene-diene-terpolymer(EPDM) contained with 1 to 3phr phenolic and quinolinic antioxidants as antirads were investigated. The marked effects of type and amounts of the antioxidant on the volume resistivity and AC breakdown strength of the $\gamma$-ray irradiated EPDM are different. A phenolic antioxidant(IR 1010) contribute to improving the electrical insulation properties on the EPDM better than quinolinic antioxidant(Kumanox RD) during irradiation. In aging the irradiated EPDM specimens contained antioxidants at room temperature in air, it was shown a improvement of insulation properties due to radical scavenging and crosslinking of EPDM aged until 360 days.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.13-16
• /
• 1998

Poly(vinyl alcohol) (PVA) gels are easily formed via physical pathway. Most PVA solutions including PVA/water solution are well known to form thermally reversible gels at low temperature but these gels showed poor mechanical properties. In order to overcome this weak point, transparent crosslinked PVA hydrogels were prepared by electron beam irradiation or by chemical process with crosslinking agents or additives. (omitted)

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.195-198
• /
• 2003

Epoxidized polybutadiene (EPB) was prepared by polybutadiene (PB) with m-chloroperbenzoic acid (MCPBA) in homogeneous solution. EPB was blended with poly(3-hydroxybutyrate) (PHB) up to 30 wt% by solution-precipitation procedure. The thermal decomposition of PHB/EPB blends was studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). The thermograms of PHB/EPB blends contained a two-step degradation process, while that of pure PHB sample exhibited only one-step degradation process. This degradation behavior of PHB/EPB blends, which have a higher thermal stability as measured by maximum decomposition temperature and residual weight, is probably due to crosslinking reactions of the epoxide groups in the EPB component with the carboxyl chain ends of PHB fragments during the degradation process, and the occurrence of such reactions can be assigned to the exothermic peaks in their DTA thermograms.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.414-422
• /
• 1999

The purpose of this study is to develop multifunctional fabric that was improved antimicrobial activity and reduction rate of gas by treatment of mixture that was blended chito colla ad crosslinking material for Nylon. Antimicrobial activity was proved 99% reduction rat of gas in case of treated was icreased. The surface of treated fiber noted harshness and irregularity. Whiteness of treated on the baking condition was decreased as time and temperature was increased. Air permeability and moisure regain of treated equally was maintained. Water absorption and static voltage of treated were increased. KOSHI and T.H.V. of treated was increased than that of untreated B/W of treated was improved that, that of untreated and 2HB/B. W/T of treated were reduced.

• 한국염색가공학회지
• /
• 제11권4호
• /
• pp.31-38
• /
• 1999

The purpose of this study is to develop multifunctional fabric that has improved antimicrobial activity and reduction rate of gas by treatment of mixture of chito colla and crosslinking material for polyester. The surface morphology of treated PET fabric was studied by scanning electron microscopy(SEM). The properties of the PET fabric, such as antimicrobial activity, whiteness, moisture regain, water absorption and static voltage, and handle were investigated. Antimicrobial activity of treated PET fabric was proved 99%. The surface of treated PET fabric showed harshness and irregularity. The whiteness of treated PET fabric on the baking condition was decreased as time and temperature was increased. The moisure regain of treated PET fabric equally was maintained. Water absorption and static voltage of treated PET fabric were improved. KOSHI of treated PET fabric was increased compared with the untreated PET fabric H/W of treated PET fabric was improved compared with the untreated PET fabric and 2HB/B of treated PET fabric were reduced.

• 대한전기학회논문지
• /
• 제33권3호
• /
• pp.112-117
• /
• 1984

The dielectric propertries of polymers are very important to investigate the molecular structure of polymer. The characteristrics of the dielectric absorption in vulcanized natural rubber were studied in the range of frequency from 10[KHz] to 32[MHz] at the temperature of 25[$^{\circ}C$]. As the results. it has been confirmed that in the case of natural ruber vulcanized between 2 and 4phr the specimens exhibit two kind of dielectric losses due to the dipole polarization by impurites and sulfure, and of above 7phr was only a loss due to the dipole polarization by sulfure and of natural rubber exhibit two kind of losses due to the interfacial and the dipole polarization. Furthermore, dielectric loss maximun tan spectrum, which removed to the low frequency according to increasing sulfure, depends greatly on sulfure. The volume resistivity of $10^{7}$~$10^{11}$[$\Omega\cdot$cm], regardness whether the crosslinking of rubber are tired by sulfure or, was observed.

• Macromolecular Research
• /
• 제13권4호
• /
• pp.297-305
• /
• 2005

The compatibilizing effect of maleic anhydride (MA) in the immiscible blends of EVA22 (vinyl acetate content 22%)/ethylene-${\alpha}$-olefin copolymers with 1-butene (EtBC) and 1-octene (EtOC)) comonomers was studied. By adding 1, 2, and 3 phr of MA in the presence of dicumylperoxide, the morphology, tensile strength at break, and 100 and 300 % modulus of EVA22/EtBC and EVA22/EtOC blends were significantly enhanced. The melting point and crystallization point depression were observed upon the addition of MA. The changes in the ${\beta}$ transition and glass transition temperature of ethylene-${\alpha}$-olefin copolymers and ethylene-vinyl acetate copolymers, respectively, indicate that MA plays a role of compatibilizer for these immiscible blends. The TGA thermograms, measured from the blends with MA, show that thermal stability is slightly enhanced with MA, indicating that MA acts as a reinforcing agent either by grafting or crosslinking with other copolymers.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.311-315
• /
• 2004

We have prepared new polyelectrolytes containing trialkoxysilyl groups by copolymerizing 3-(trimethoxysilyl)propyl methacrylate (TSPM) with either [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride (METAC), [2-(methacryloyloxy)ethyl]dimethyl propyl ammonium bromide (MEDPAB), or [2-(acryloyloxy)ethyl]trimethyl ammonium chloride (AETAC). The copolymers TSPM/METAC, TSPM/MEDPAB, and TSPM/METAC having compositions of 15/85, 10/90, and 5/95, respectively, were self-crosslinkable polyelectrolytes that possess humidity-sensitive properties. We measured the impedances of the copolymers at various relative humidities (RHs) and found that the resistance was dependent on the content of METAC, MEDPAB, or AETAC. The impedance changed from 10$\^$7/ $\Omega$ at 20% RH to 10$^3$ $\Omega$ at 95% RH, which is quite a suitable range for a humidity sensor that is to be utilized at ambient humidity. We also performed tests of the materials temperature dependence, hysteresis, response time, and water durability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.223-223
• /
• 2007

Thermal and mechanical properties were investigated in several semi-conductive materials which is composed of carbon black and polymer. EVA, EEA, and EBA is normally used for matrix polymer and normally acetylene black and furnace black is used. Isothermal thermo gravimetric analysis is done as a function of atmosphere and temperature. In nitrogen atmosphere semicon compound was slowly degradaded but in ambient condition degradaded fast. So in the cable manufacturing, atmosphere and materials are very important.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 추계 총회 및 학술발표회
• /
• pp.115-117
• /
• 1998

생물 발효 공정에 의해 생산된 부탄올 수용액은 농도가 희박하여 농축 공정이 필요하다. 기존의 농축 공정 중 투과증발공정은 공비혼합물이나 비점이 근접한 혼합물등을 분리하는데 에너지가 적게 들고, 분리 효과가 뛰어나며, 조업이 용이하고, 공정이 차지하는 공간이 적다는 장점을 가지고 있다. 산업적으로 관심을 갖는 5 wt% 이하의 부탄올 수용액을 효과적으로 농축시키기 위해 투과증발공정이 사용된다. 현재 투과증발공정에 사용되는 막에는 elastomeric membrane, plasma treated membrane, UV-grafted membrane, polymer blend membrane이 연구 개발되어 사용되고 있는데, 이중 플라즈마 처리방법을 통해 막을 제조 할 경우, 플라즈마 대상 물질의 선택 폭이 넓고, 분리물과 막간의 친화력을 향상 시키기 위해 분리물과 유사한 화학구조를 갖게 할 수 있으며, 형성된 코팅 층이 crosslinking되어 안정성을 갖는 장점이 있다. 따라서 본 연구에서는 플라즈마 처리법을 통해 투과증발막을 제조하고 제조된 막을 부탄올 농축에 사용하여 막의 성능을 조사하였고, 막의 성능과 접촉 각, sorption, heat of mixing간의 상관 관계에 대해 살펴 보았다.