• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.817-825
• /
• 2022

A recent benchmarking effort, under the auspices of the Organization for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA), has been made to evaluate the current state of modeling and simulation tools available to model fluoride salt-cooled high temperature reactors (FHRs). The FHR benchmarking effort considered in this work consists of several cases evaluating the neutronic parameters of a 2D prismatic FHR fuel assembly model using the participants' choice of simulation tools. Benchmark participants blindly submitted results for comparison with overall good agreement, except for some which significantly differed on cases utilizing a molybdenum-bearing control rod. Participants utilizing more recently updated explicit isotopic cross sections had consistent results, whereas those using elemental molybdenum cross sections observed reactivity differences on the order of thousands of pcm relative to their peers. Through a series of supporting tests, the authors attribute the differences as being nuclear data driven from using older legacy elemental molybdenum cross sections. Quantitative analysis is conducted on the control rod to identify spectral, reaction rate, and cross section phenomena responsible for the observed differences. Results confirm the observed differences are attributable to the use of elemental cross sections which overestimate the reaction rates in strong resonance channels.

• Carbon letters
• /
• v.16 no.3
• /
• pp.147-170
• /
• 2015

In recent decades, there has been an increasing interest in the use of carbon fiber reinforced plastic (CFRP) in aerospace, renewable energy and other industries, due to its low weight and relatively good mechanical properties compared with traditional metals. However, due to the high cost of petroleum-based precursors and their associated processing costs, CF remains a specialty product and as such has been limited to use in high-end aerospace, sporting goods, automotive, and specialist industrial applications. The high cost of CF is a problem in various applications and the use of CFRP has been impeded by the high cost of CF in various applications. This paper presents an overview of research related to the fabrication of low cost CF using polyethylene (PE) control technology, and identifies areas requiring additional research and development. It critically reviews the results of cross-linked PE control technology studies, and the development of promising control technologies, including acid, peroxide, radiation and silane cross-linking methods.

• Journal of Preventive Medicine and Public Health
• /
• v.51 no.1
• /
• pp.23-32
• /
• 2018

Objectives: To identify the associations of characteristics of the neighborhood environment with substance abuse among clients receiving treatment for drug abuse in Thailand. Methods: A cross-sectional study was conducted of 1128 drug addicts from 28 neighborhoods who were receiving treatment at all 7 compulsory drug detention centers in Thailand. A trained interviewer conducted structured interviews with the subjects about substance use and the perceived neighborhood environment in their community. A multilevel logistic regression model was applied to estimate the effects of the neighborhood environment on substance use. Results: The majority of participants, 53.8% only used methamphetamine pills, 31.3% used other illicit drugs as well as methamphetamine pills, and 14.9% used an illicit drug other than methamphetamine. Three neighborhood characteristics were associated with substance use. A 1-unit increase in the perceived neighborhood cohesion score was associated with a 15% reduction in methamphetamine pill use and an 11% reduction of the use of both methamphetamine pills and another illicit drug. Conversely, a 1-unit increase in perceived neighborhood crime predicted 19 and 14% increases in the use of methamphetamine pills and the use of both methamphetamine pills and another illicit drug, respectively. In addition, a 1-unit increase in the scores for stigma surrounding addiction corresponded to a 25% increase of the use of methamphetamine pills and a 12% increase in the use of both methamphetamine pills and another illicit drug. Conclusions: Substance use among drug addicts was influenced by characteristics of the neighborhood environment. Therefore, prevention and intervention strategies should be designed based on a consideration of the impact of neighborhood context on substance use behaviors.

• Integrative Medicine Research
• /
• v.7 no.4
• /
• pp.333-340
• /
• 2018

Background: Traditional Korean medicine (TKM) is widely used to treat children with cerebral palsy (CP) in Korea; however, studies investigating factors that influence the use of TKM are scarce. Thus, we investigated the clinical factors that might influence the use of TKM. Methods: A population-based, cross-sectional, multicenter survey was performed from August 2014 to May 2016. The history of TKM use, type and severity of CP, current treatment characteristics, presence of accompanying disabilities or other health problems not directly related to CP, and monthly cost for the treatment of CP were surveyed. Results: In total, 182 children were recruited, and 78 children (42.9%) had used TKM. Among these 78 children, 50 (64.1% of the TKM-use group) had used both acupuncture and herbal medication, 15 (19.2%) had used acupuncture only, and 13 (16.7%) had used herbal medication only. Children with non-typical CP, accompanying disabilities and general health problems tended to use TKM. The monthly cost of treatment for CP was significantly higher in the TKM-use group than that in the no-TKM-use group, suggesting that economically disadvantaged children may have difficulty in accessing TKM. Dietary supplements, conventional pharmacological treatments, and rehabilitation therapies did not affect TKM use. Conclusion: Children with non-typical symptoms or those with poor overall health status are likely to use TKM. Additionally, TKM use leads to increased treatment costs. Studies investigating the motivation for starting or ceasing TKM therapy, socioeconomic factors and the attitude of parents towards complementary and alternative medicine should be performed.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.508-518
• /
• 2016

In this paper, we propose a method combining an accelerometer with a cross structured light system to estimate the golf green slope. The cross-line laser provides two laser planes whose functions are computed with respect to the camera coordinate frame using a least square optimization. By capturing the projections of the cross-line laser on the golf slope in a static pose using a camera, two 3D curves’ functions are approximated as high order polynomials corresponding to the camera coordinate frame. Curves’ functions are then expressed in the world coordinate frame utilizing a rotation matrix that is estimated based on the accelerometer’s output. The curves provide some important information of the green such as the height and the slope’s angle. The curves estimation accuracy is verified via some experiments which use OptiTrack camera system as a ground-truth reference.

• Korean Management Science Review
• /
• v.21 no.3
• /
• pp.129-147
• /
• 2004

Scenario analysis for strategic planning, unlike most forecasting methods, provides a qualitative, contextual description of how the present will evolve into the future. It normally tries to identify a set of possible futures, each of whose occurrence is plausible but not assured. In this paper, we propose the use of Cross Impact Analysis(CIA) approach for scenario generation about the future of Korean IT environments. In this analysis, we classified IT environments into technical, social, legislative, and economic factor. And various variables and events were defined in each factor. From the survey collected from IT related experts, we acquire probability of occurrence and compatibility estimates of every possible pairs of events as input. Then 2 phase analysis is used in order to choice events with high probability of occurrence and generate scenario. Finally, after CIA using Monte Carlo simulation, a detail scenario for 2010 was developed. These scenario drawn from the CIA approach is a result considered by cross impacts of various events.

• Transactions of Materials Processing
• /
• v.24 no.5
• /
• pp.368-374
• /
• 2015

Hydroforming of a non-axisymmetric thin-walled tubular component with variable cross sections was analyzed. In order to solve the sealing problem which occurred due to the thin and non-axisymmetric shape, the use of a lead patch on the punch, which had been successful in hydroforming of thin tubes, was evaluated. A lead patch was attached to the punch to solve the sealing problem, which was caused by the stress gradient in the non-axisymmetric shape. FEM and experiments were also performed to analyze these sealing problems associated with the punch shape and non-axisymmetric shape. Finally, the lead patch was attached at tube surface where intensive local strain concentration would occur to enhance the hydroformability. These methods were successfully used to fabricate non-axisymmetric thin-walled tubular component with variable cross sections that had previously failed during traditional hydroforming.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.172-176
• /
• 2000

A series of preliminary experiments were carried out to quantify the annoyance are noisiness caused by floor impact noise. From the results of the experiments. the heavy impact source was found to be felt louder and noisier than the light impact source. Measurements of noise were also conducted by a diagnostic system based on the model(the model consists of the autocorrelators and the cross-correlation for signals arriving at two ear entrants) of the human auditory-brain system. Physical factors in the model were calculated by use of the ACF(autocorrelation function) and IACF(interaural cross correlation function) of binaural signals. From the ACF/IACF analysis, it was found that perceived loudness of floor impact noise could be represented by the factors of the ACF/IACF model.

• Communications of the Korean Mathematical Society
• /
• v.23 no.2
• /
• pp.211-227
• /
• 2008

As a mathematical model proposed to understand the behaviors of interacting species, cross-diffusion systems with functional responses of prey-predator type are considered. In order to obtain $W^{1_2}$-estimates of the solutions, we make use of several forms of calculus inequalities and embedding theorems. We consider the quasilinear parabolic systems with the cross-diffusion terms, and without the self-diffusion terms because of the simplicity of computations. As the main result we derive the uniform $W^{1_2}$-bound of the solutions and obtain the global existence in time.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.379-384
• /
• 2000

High-Tc superconducting current leads with multi-step and continually varied cross-sectional area are studied to reduce heat leak into cryostat and material use. Assuming conduction-cooled lead the cross-sectional area is reduced along the heat flow direction according to the increase of critical current density which increases with decreasing temperature. In this study, we also analyze the multi-step cross-sectional area High-Tc current leads. The multi-st데 current leads changes the cross-sectional area to have constant safety-factor at changed section. The heat leak into cryostat, total voume, safety-factor and the temperature profiles are compared to those of the constant safety-factor current leads. The developed methods are applied to the Bi-2223 superconductor sheathed with Ag-Au alloy.