• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.4
• /
• pp.295-301
• /
• 2002

In this paper, solenoid-type 3-D passives (inductors and transformers) have been designed, fabricated, and characterized by using electroplating techniques, wire bonding techniques, multi-layer thick photoresist, and low temperature processes which are compatible with semiconductor circuitry fabrication. Two different fabrication approaches are performed to develop the solenoid-type 3-D passives and relationship of performance characteristics and geometry is also deeply investigated such as windings, cross-sectional area of core, spacing between windings, and turn ratio. Fully integrated inductor has a quality factor of 31 at 6 GHz, an inductance of 2.7 nH, and a self resonant frequency of 15.8 GHz. Bonded wire inductor has a quality factor of 120, an inductance of 20 nH, and a self resonant frequency of 8 GHz. Integrated transformers with turn ratios of 1:1 and n:l have the minimum insertion loss of about 0.6 dB and the wide bandwidth of a few GHz.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.143-151
• /
• 2021

This study was a cross-sectional descriptive research to analyze the effects of sub-factors of cognitive emotional control on happiness levels. The participants of the study were 201 men and women in their 20s, and data were collected online from January 1 to 15 collected data were, 2001 using structured cognitive control and happiness level questionnaires. The collected data were conducted Independent t-test, Pearson correlation analysis, simple regression analysis, multiple regression Analysis, hierarchical regression analysis using SPSS 18.0 statistic program. As a result, the study appeared that the level of happiness by gender does not differ, and cognitive emotional control affected 58.5%. The average of cognitive emotional control was higher for all men, but women were higher than men in criticized others. Also, acceptance was the sub-factor of emotional control that most affected the level of happiness (β=-.587, p<0.01). Based on the results of this study, it is suggested that a systematic program on subject of acceptance, a sub-factor of cognitive emotional control, should be developed to improve the level of happiness.

• Child Health Nursing Research
• /
• v.29 no.1
• /
• pp.37-50
• /
• 2023

Purpose: This study aimed to validate the Child Healthy Lifestyle Profile as an instrument for screening healthy behaviors in school-aged children in South Korea. Methods: Self-reported questionnaires were administered to 454 students, comprising elementary-school students (n=221) and child cancer survivors (n=233). Reliability and validity were assessed using Cronbach's α, exploratory factor analysis (EFA), and confirmatory factor analysis (CFA). Results: Cronbach's α, as a reliability test, was 0.87. Varimax rotation yielded nine factors with eigenvalues greater than 1 in the EFA, which explained 61.0% of the total variance. In the CFA, both convergent and discriminant validities were acceptable. Therefore, the Child Healthy Lifestyle Profile was validated as an assessment tool for Korean school-aged children. Conclusion: Based on the results of this study, the Child Healthy Lifestyle Profile was identified as a reliable and valid instrument for assessing healthy lifestyles in elementary-school children in South Korea.

• Journal of Information Technology Applications and Management
• /
• v.12 no.3
• /
• pp.111-128
• /
• 2005

This paper examines the validity of the newly developed IT consulting SERVQUAL measurement tool. In an attempt to measure Ire IS customers' expectations and perceived quality of the services they received, the researchers developed a diagnostic tool of SERVQUAL based on the solid theoretical background, which can specifically be applied to the IT consulting service sector. This on-going research so far, has been applied to six (6) different organizations that have received IT consulting services over the past years. From the preliminary data collected, the correlation and the factor analyses were conducted to understand the underlying concept and refinement of the measurement tool. Although the correlation analysis showed a little tendency of collinearity among some of the variables, all showed sound relationship of the proposed hypotheses. The exploratory factor analytic approach was chosen because it does not set any priori constraints on the estimation of components or the number of components to be extracted. The number of different factor solutions was extracted and tested to see which solution represents better grouping of the variables. The Crombach's Alpha was computed on different combinations of the factor solutions to ensure validity. The results show 8-dimensional IT consulting SERVQUAL measures which they are, assurance, knowledge & skill, customer relationship, support, empathy, process management, expertise, and education, seem more appropriate than the originally proposed 6 dimensions. The study approach was non-experimental cross-sectional research design. The longitudinal design of follow-up studies to periodically revise and refine current measure is strongly recommended for fine tuning of the tool.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.66-73
• /
• 2019

Recently, FDM-type 3D printer technology has been developed, and efforts have been made to improve the output formability and characteristics further. Through this, 3D printers are used in various fields, and printer technologies are suggested according to usage, such as FDM, SLA, DLP, and SLM. In particular, the FDM method is the most widely used, and the FDM method technology is being developed further. The characteristics of the output are produced by the FDM-type 3D printer, which is determined by various factors, and particularly the perspective of the Inter-Layer Fill Factor, which is the volume ratio of the laminated material that exerts a direct influence. In this study, the Inter-Layer Fill Factor is theoretically obtained by presenting the internal space between each layer according to the laminate thickness as a cross-sectional shape model, and the cross section of the actual laminated sample is compared with the theoretical model through experiments. Then, the equation for the theoretical model is defined, and the strength change according to each condition (tensile strength of material, reduction slope, strength reduction rate, and output strength) is confirmed. In addition, we investigated the influence on the correlation and strength between laminate thickness and the Inter-Layer Fill Factor.

• Korean Journal of Agricultural Science
• /
• v.32 no.2
• /
• pp.151-167
• /
• 2005

In this study, certain factors influencing cherry tomato were estimated using system equations. In addition, the amount of influence to income from each factor was estimated from both direct and indirect effects. Based on OLS(Ordinary Least Squares) estimation, path analysis and factor analysis were employed to overcome multicollinearity problems. Data used in this study is interviewed cross sectional data of 65 cherry tomato producing farm in Chungnam-do area. Average age of the producers is 46.5. Average year of the production is 8 years. Average farm size, productivity, and income are 1,123 pyong, 7,439kg/10a, 8,112,000won/10a, respectively. The business performance of the sample farms were above average, in terms of the diagnosis by "Standard Business Diagnosis for Cherry tomato". To identify the factors influencing productivity, 15, 19, and 25 independent variables were selected for the dependent variables of yield, price(quality), and business cost, respectively. Finally, yield, quality, and business cost variables were set as independent variables to explain income as dependent variable. As a result of main factor analysis, 10, 12, 15, and 16 factors were identified as main factors for yield, quality, business cost, and income, respectively.

• Journal of Oral Medicine and Pain
• /
• v.46 no.4
• /
• pp.117-124
• /
• 2021

Purpose: Salivation is considered to be an important factor in the control of halitosis, and the amount of salivation has been shown to be closely related to the level of hydration. The purpose of our study was to evaluate the relationship between dehydration and halitosis. Methods: Twenty healthy young females with no dental problems were recruited. All participants were induced to become dehydrated and then over-hydrated. After inducing each hydration state, the severity of hydration and halitosis factor (organoleptic scores, amounts of resting and functional saliva, gas examinations, and tongue coatings) were measured. Hydration statuses were graded as dehydration, normal, or over-hydration according to urine osmolality. This was a cross sectional study with a cross over design. Results: The dehydrated status was associated with higher organoleptic scores than the normal or over-hydrated status (1.75±0.75 vs. 0.87±0.63, and 0.65±0.53, respectively. p<0.05). Mean values of CH₃SH, (CH₃)₂S in portable gas chromatography for the dehydrated, normal, and over-hydrated status were 11.70±37.00, 6.75±13.50, and 2.80±5.87 nmol/mol, 10.50±15.59, 7.25±10.87, and 1.50±2.55 nmol/mol, respectively. p>0.05). (CH₃)₂S (r=0.410, p=0.009) showed a moderate positive correlation with dehydration status. The resting salivation rates were relatively lower for the dehydrated status than for the normal or overhydrated status (p>0.05), and tongue coating results were also higher for the dehydrated status (p>0.05). Conclusions: Dehydration status appears to be positively correlated with a low resting salivation rate and high portable gas chromatography results. This shows that dehydration might be an etiologic factor of halitosis.

• Physical Therapy Korea
• /
• v.30 no.2
• /
• pp.120-127
• /
• 2023

Background: In general, measurement qualities of cross-culturally adapted quality of life (QOL) measures are altered in many aspects, although versions of them are well-validated measures. The latent trait and measurement qualities of the QOL measures for cancer-related samples should be considered when developing cross-culturally adapted measures. Objects: To investigate the latent trait of the translated into Korean World Health Organization Quality of Life-BREF (WHOQOL-BREF) administered to different cancer survivors who had palliative rehabilitation care service (PRCS). Methods: A cross-sectional study with 139 cancer survivors who had an experience of cancer survivorship with PRCS were conducted with a two-step analytic procedure including exploratory factor analysis (EFA) to confirm the latent trait and Rasch rating scale modeling to investigate the measurement qualities of the cross-culturally adapted WHOQOL-BREF measure. Results: While the original WHOQOL-BREF measure constitutes a 4-latent trait, the EFA reveals that 24 items constitute six substantial factors. The item loadings are predominantly spread over factors 1 through 4 in a mixed manner of the latent traits, while the loadings of 'physical health' and 'environmental health' latent traits show similarity to what the original measure intended to assess. The latent trait of the cross-culturally adapted WHOQOL-BREF measure administered to different cancer survivors is likely to reveal more dimensions than the original WHOQOL-BREF measure. Person reliability (i.e., analogous to Cronbach's alpha) and separation are measured with 0.92 and 3.48, respectively. All items except the one item (medical treatment item) fit the Rasch rating model. Conclusion: Findings suggest that the latent trait and the measurement qualities of the cross-culturally adapted WHOQOL-BREF measure should be taken into consideration when applying versions of it to various populations.

• Structural Engineering and Mechanics
• /
• v.32 no.6
• /
• pp.705-724
• /
• 2009

The two major widely used building design code documents of reinforced concrete structures are the ACI 318-05 and Eurocode for the Design of Concrete Structures EC2. Therefore, a thorough comparative analysis of the provisions of these codes is required to confirm their validity and identify discrepancies in either code. In this context, provisions of flexural computations would be particularly attractive for detailed comparison. The provisions of safety concepts, design assumptions, cross-sectional moment capacity, ductility, minimum and maximum reinforcement ratios, and load safety factors of both the ACI 318-05 and EC2 is conducted with parametric analysis. In order to conduct the comparison successfully, the parameters and procedures of EC2 were reformatted and defined in terms of those of ACI 318-05. This paper concluded that although the adopted rationale and methodology of computing the design strength is significantly different between the two codes, the overall EC2 flexural provisions are slightly more conservative with a little of practical difference than those of ACI 318-05. In addition, for the limit of maximum reinforcement ratio, EC2 assures higher sectional ductility than ACI 318-05. Overall, EC2 provisions provide a higher safety factor than those of ACI 318-05 for low values of Live/Dead load ratios. As the ratio increases the difference between the two codes decreases and becomes almost negligible for ratios higher than 4.

• Nutrition Research and Practice
• /
• v.14 no.4
• /
• pp.384-400
• /
• 2020

BACKGROUND/OBJECTIVES: Dietary factors are important contributors to cardiometabolic and cancer mortality. We examined the secular trends of nine dietary factors (fruits, vegetables, whole grains, nuts and seeds, milk, red meat, processed meat, sugar-sweetened beverages, and calcium) and the associated burdens of cardiometabolic and cancer mortality in Korea using representative cross-sectional survey data from 1998 to 2016. SUBJECTS/METHODS: Using dietary data from Korean adults aged ≥ 25 years in the Korea National Health and Nutrition Examination Survey (KNHANES), we characterized secular trends in intake levels. We performed comparative risk assessment to estimate the population attributable fraction and the number of cardiometabolic and cancer deaths attributable to each dietary factor. RESULTS: A total of 231,148 cardiometabolic and cancer deaths were attributable to nine dietary risk factors in Korea from 1998 to 2016. Suboptimal intakes of fruits and whole grains were the leading contributors. Although the intakes of fruits, vegetables, and whole grains moderately improved over time, the intake levels in 2016 (192.1 g/d, 225.6 g/d, and 10.9 g/d, respectively) remained far below the optimal levels. Deaths attributable to the low intakes of nuts and seeds (4.5 g/d), calcium (440.5 mg/d), and milk (37.1 g/d) and the high intakes of red meat (54.7 g/d), processed meat (4.7 g/d), and sugar-sweetened beverages (33.0 g/d) increased since 1998. Compared with older age groups (≥ 45 years), more unfavorable changes in dietary patterns were observed in the younger population aged 25-44 years, including more sharply increased intakes of processed meat. CONCLUSIONS: We observed improvement in the intakes of fruits, vegetables, and whole grains and unfavorable changes in the intakes of processed meat and sugar-sweetened beverages over the past few decades. Our data suggest that to reduce the chronic disease burden in Korea, more effective nutritional policies and interventions are needed to target these dietary risk factors.