• Journal of Environmental Science International
• /
• v.5 no.1
• /
• pp.93-102
• /
• 1996

Hydrodynamic characteristics such as gas holdup, liquid circulation velocity and bed expansion in a hexagonal inverse fluidized bed were investigated using air-water system by changing the ratio ($A_d$/$A_r$) of cross-sectional area between the riser and the downcomer, the liquid level($H_1$/H), and the superficial gas velocity($U_g$). The gas holdup and the liquid circulation velocity were steadily increased with the superficial gas velocity increasing, but at high superficial gas velocity, some of gas bubbles were carried over to a downcomer and circulated through the column. When the superficial gas velocity was high, the $A_d$/$A_r$ ratio in the range of 1 to 2.4 did not affect the liquid circulation velocity, but the maximum bed expansion was obtained at $A_d$/$A_r$ ratio of 1.25. The liquid circulation velocity was expressed as a model equation below with variables of the cross-sectional area ratio($A_d$/$A_r$) between riser to downcomer, the liquid level($H_1$/H), the superficial gas velocity($U_g$), the sparser height[(H-$H_s$)/H], and the draft Plate level($H_b$/H). $U_{ld}$ = 11.62U_g^{0.75}$${(\frac{H_1}{H})}^{10.30}$${(\frac{A_d}{A_r})}^{-0.52}$${(\frac({H-H_s}{H})}^{0.91}$${(\frac{H_b}{H})}^{0.13}$

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.320-326
• /
• 2020

The present study aimed to assess the longitudinal connectivity owing to migrant characteristics of the target fish. The study area was Wonju-cheon Stream, and the target species were Zacco platypus and Minnows. The HEC-RAS model was used for the computation of the flow, and the ICE (Information sur la Continuite Ecologique) method was used to analyze the longitudinal connectivity. The longitudinal connectivity was assessed using the minimum overflow height, velocity, and depth of the cross sectional structure of a plunge pool and considering the swimming speed of the target fish. Simulation results indicated that the longitudinal connectivity scores for the Zacco platypus and Minnows were approximately 76 and 23, respectively.

• Journal of Korean Public Health Nursing
• /
• v.37 no.1
• /
• pp.136-146
• /
• 2023

This cross-sectional design study was undertaken to determine the factors associated with suicidal ideation in human immunodeficiency virus (HIV)-infected older adults. Data from a city-wide representative sample collected by the Seoul Metropolitan Government were used. The cross-sectional survey was conducted between February and March 2013. Participants selected and included in the analysis were HIV-infected adults living in Seoul, and aged 50 years and older. The overall adjusted model showed that being unemployed (adjusted odds ratio [aOR], 3.34; 95% confidence interval [CI], 1.16-9.57), a history of depression treatment (aOR, 4.61; 95% CI, 1.02-20.66), perceived belongingness (aOR, 0.63; 95% CI, 0.41-0.99), and psychological functioning (aOR, 0.85; 95% CI, 0.73-0.99) were significantly related to suicidal ideation. Psychosocial features were found to be strongly associated with suicidal ideation among HIV-infected older adults. The findings could be useful for HIV nursing consultants to identify HIV-infected older adults who are vulnerable to suicidal ideation. Comprehensive mental health services should be provided as coping resources for HIV-infected older adults who have suicidal ideation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.62-67
• /
• 2002

It has been shown that the vibrational response of a tire can be represented by a set of decaying waves, each associated with a particular cross-sectional mode shape in the region near the contact patch. Thus, it can be concluded that tires can be effectively modeled as lossy waveguides. It has also been shown that the sound radiation from tires is mainly from the region close to the contact patch. In consequence, it may be computationally efficient to analyze tire vibration and sound radiation in the region close to the contact patch by using a hybrid finite element model in which the cross-section of a tire is approximated by 2-D finite elements while an analytical wave solution is assumed in the circumferential direction of the tire. In this article. a hybrid finite element was formulated based on a composite shell model. The dispersion relations for sample structures obtained by using the hybrid FE model were then compared with those obtained by using a full, three-dimensional FE model. It has been shown that the FE analysis made using the hybrid 2-D finite elements yields results in close agreement with the three-dimensional model.

• Structural Engineering and Mechanics
• /
• v.78 no.4
• /
• pp.413-423
• /
• 2021

Piers are the main lateral force-resisting members of high-speed railway (HSR) bridges used in China and are characterized by low axial load ratios, low longitudinal reinforcement ratios, low stirrup ratios, and high shear span ratios. It is well known that flexural, flexural-shear, and shear failures of piers may occur during an earthquake. In this study, a new shear strength model was developed to simulate the seismic failure of HSR solid piers accurately. First, low cyclic-loading test data of solid piers obtained in recent years were collected to set up a database for model verification. Second, based on the test database, the applicability of existing shear strength models was evaluated. Finally, a new shear strength model for HSR solid piers with round-ended cross-sections was derived based on the truss model and ultimate equilibrium theory. In comparison with existing models, it was demonstrated that the proposed model could be used to predict the shear strength of HSR piers more accurately.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.892-899
• /
• 2002

Among the methods for enhancement of load-carrying capacity on flexural concrete member, recently, a concept is being investigated which replaces the steel in a conventional reinforced concrete member with a fiber reinforced polymer(FRP) shell. This study focuses on modeling of the structural behavior of concrete surrounded with FRP shells in flexural bending members. A numerical model of fiber cross-sectional analysis is proposed to predict the stress and deformation state of the FRP shell and concrete. The stress-strain relationship of concrete confined by a FRP shell is formulated to be based on the constitutive law of concrete in multi-axial compressive stress state, in assuming that the compression response is dependent on the radial expansion of the concrete. To describe the FRP shell behavior, equivalent orthotropic properties of in-plane behavior from classical lamination theory are used. The present model is validated to compare with the experiments of 4-point bending tests of FRP shell concrete beam, and has well predicted the moment-curvature relationships of the members, axial and hoop strains in the section, and the enhancement of confinement effect in concrete surrounded by FRP shell.

• Wind and Structures
• /
• v.6 no.6
• /
• pp.485-498
• /
• 2003

This paper presents a mechanical model of Rain-Wind Induced Vibration (RWIV) of stay cables. It is based on the physical interpretation of the phenomenon as given in Cosentino, et al. (2003, referred as Part I). The model takes into account all the main forces acting on cable, on the upper water rivulet (responsible of the excitation) and the cable-rivulet interaction. It is a simplified (cable cross-sectional and deterministic) representation of the actual (stochastic and three-dimensional) phenomenon. The cable is represented by its cross section and it is subjected to mechanical and aerodynamic (considering the rivulet influence) forces. The rivulet is supposed to oscillate along the cable circumference and it is subjected to inertial and gravity forces, pressure gradients and air-water-cable frictions. The model parameters are calibrated by fitting with experimental results. In order to validate the proposed model and its physical basis, different conditions (wind speed and direction, cable frequency, etc.) have been numerically investigated. The results, which are in very good agreement with the RWIV field observations, confirm the validity of the method and its engineering applicability (to evaluate the RWIV sensitivity of new stays or to retrofit the existing ones). Nevertheless, the practical use of the model probably requires a more accurate calibration of some parameters through new and specifically oriented wind tunnel tests.

• Journal of Korea Water Resources Association
• /
• v.30 no.1
• /
• pp.63-73
• /
• 1997

Finite element model is established for the simulation of groundwater flow due to water curtain around underground oil storage Choleski decomposition method. The symmetric global conductance matrix is solved by vector storage Choleski decomposition method. The model is verified through comparison with the results of electric analogy. For the application of this model to real site, the finite element meshes are constructed according to representative vertical cross and longitudinal sections. In cross-sectional analysis, potential and flow distributions are compared based on the cavern pressure and horizontal water curtain. For longitudinal section, effects between nearly located caverns with or without vertical water curtain are analyzed. These results prove that the established model can be used as a tool for flow analysis around underground caverns.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.577-584
• /
• 1994

The relation between lead in air (PbA) and lead in blood (PbB), concentrations was investigated among 44 workers in five major operations in a United States high volume, lead acid battery plant. The study covered a 30 month period in which workers received frequent PbA and PbB determinations, workers remained in a single job, and PbA concentrations averaged below the US Occupational Safety and Health Administration (OSHA) permissible exposure limit of $50{\mu}g/m^{3}$. In both univariate and multivariable linear regressions, longitudinal analyses averaging PbA concentrations over the 30 month study period appeared superior to cross sectional analyses using only six month PbA averages .to model PbB concentrations. The covariate adjusted coefficient ($\alpha$ value) for PbA($\mu/m^{3}$) in models of PbB (${\mu}g/100\;g$) was 1-14. This figure is strikingly higher than that reported in previous studies in the lead acid battery industry in all of which PbA concentrations were substantially higher than in the current study. Plausible explanations for the differences in a: values include non-linearity of the PbA-PbB curve, a higher fraction of large size particulate associated with higher PbA concentrations, survivor bias among workers exposed to higher PbA concentrations, and the cross sectional designs of most previous studies. Despite previously reported problems with the model used by OSHA to predict PbA-PbB relations, the findings of this study are in good agreement with the predictions of that model.

• Sleep Medicine and Psychophysiology
• /
• v.28 no.1
• /
• pp.34-42
• /
• 2021

Objectives: This study investigated sleep quality in female full-time homemakers and evaluated the relationship of sleep disturbance with psychological and socio-environmental factors. Methods: This cross-sectional study adopted a structured survey and sequential recruitment method for randomized participation of community-dwelling full-time female homemakers. Sleep quality and mental health were measured using the Korean version of the Pittsburgh Sleep Quality Index (K-PSQI), Korean version of the Beck Depression Inventory-II (K-BDI-II), Korean version of the Beck Anxiety Inventory (K-BAI), and Korean version of the Beck Hopelessness Scale (K-BHS). The willingness-to-pay (WTP) method was selected to measure the self-evaluated monetary value of household service work. The relationship among the main relevant factors was statistically analyzed through a mediation model. Results: A total of 166 participants were analyzed and classified having poor versus good sleep quality (poor : 24.1%, n = 40 ; good : 75.9%, n = 126 ; cut-off point = 9 on the K-PSQI). Significant between-group differences were observed in mental health status (K-BDI-II, p < 0.001 ; K-BAI, p < 0.001 ; K-BHS, p = 0.003). The moderated mediation model was verified, indicating that depression may mediate the association between nurturing burden and sleep disturbance. The path from nurturing burden to depression may be moderated by average monthly household income. Conclusion: A relatively high portion of full-time female homemakers may suffer from sleep disturbance and interactions between psychological and socio-environmental factors might determine sleep quality, suggesting the need for public health policies targeting improvement of sleep quality and mental health among full-time homemakers.