• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.577-584
• /
• 2006

The binding of heavy metal ions onto cross-linked chitosan in dilute aqueous solution has been investigated as a function of pH (4.0 and 7.0), agitation period (10-180min) and concentration of various metal cations (5, 10, 50 and 100ppm). In order to obtain adsorbents that are insoluble and stable, and prevent the dissolution loss of chitosan into an acidic aqueous solution, chitosan flakes were cross-linked with epichlorohydrine (ECH) and its adsorption behavior was compared with that of the non cross-linked chitosan. An advantage of ECH is that it does not eliminate the cationic amine functional group of chitosan. In terms of adsorption ratio, the chitosan cross-linked at an ECH was inferior to original chitosan and was found that chitosan has a selectivity much remarkable than the cross-linked chitosan in low concentrated metal solutions. However, no significant decreases in the adsorption ratios were observed between the cross-linked ECH-chitosan and the non cross-linked chitosan concerning the adsorption of $Ni^{2+}$, $Co^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ acidic solution.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.130-135
• /
• 1997

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by longitudinal distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product changes with the aspect ratio of product and increases with the decreases in die length and in eccentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-section at the die exit.

• 응용통계연구
• /
• 제18권2호
• /
• pp.471-485
• /
• 2005

범주형 자료분석에서 차원축소(collapsibility)는 오즈비로 설명되었다. 실제의 $2{\times}2{\times}K$ 분할표 자료를 이 이론에 적응시켰을 때 오즈비의 값으로 차원축소가 가능한지의 여부를 판단하기는 어렵다. 오즈비를 시각적으로 표현하는 방법 중에서 Doi, Nakamura와 Yamamoto(2001)가 제안한 Contour plot을 통해서 분할표 자료를 설명하는 것은 가능하지만 차원축소의 가능성을 결정하기에는 한계가 있다. 본 연구에서는 오즈비의 신뢰구간을 시각적으로 표현할 수 있는 방법으로 Barrowman과 Myers(2003)가 제안한 Raindrop plot을 이용하여 $2{\times}2{\times}K$ 분할표 자료를 설명할 수 있으며 동시에 차원축소의 가능성을 판단할 수 있는 방법을 제안하고자 한다.

• Steel and Composite Structures
• /
• 제7권3호
• /
• pp.185-200
• /
• 2007

Tubular construction is widely used in a range of civil and structural engineering applications. To date, the principal product range has comprised square, rectangular and circular hollow sections. However, hot-rolled structural steel elliptical hollow sections have been recently introduced and offer further choice to engineers and architects. Currently though, a lack of fundamental structural performance data and verified structural design guidance is inhibiting uptake. Of fundamental importance to structural metallic design is the concept of cross-section classification. This paper proposes slenderness parameters and a system of cross-section classification limits for elliptical hollow sections, developed on the basis of laboratory tests and numerical simulations. Four classes of cross-sections, namely Class 1 to 4 have been defined with limiting slenderness values. For the special case of elliptical hollow sections with an aspect ratio of unity, consistency with the slenderness limits for circular hollow sections in Eurocode 3 has been achieved. The proposed system of cross-section classification underpins the development of further design guidance for elliptical hollow sections.

• 호남수학학술지
• /
• 제43권3호
• /
• pp.385-402
• /
• 2021

The geometry of Poincaré disk itself is interpreted without any mapping to different spaces. Our approach might be one of the shortest and is intended for educational contribution.

• 소성∙가공
• /
• 제7권4호
• /
• pp.340-346
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of the extruded products with elliptical shapes from round billet. The twisting of extruded product is caused by the lin-early increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product in creases with the die twisting angle, the aspect ratio of product the friction condition, the reduction of area, and decreases with the die length.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.210-213
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by axial distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increase with the die twisting angle and the aspect ratio of product and friction condition and reduction area and show that angular velocity increases with the decreases in die length.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.6097-6120
• /
• 2019

Online consumer reviews (OCRs) provide product information and recommendations especially pictures in reviews depict the true information about the product. This study investigates the influence of pictured reviews on online seller (for a particular product of a seller) rating with moderating effect of price, brand type (foreign vs local), goods type (experience vs search), and brand familiarity. Multiple robust linear regression analysis with moderation interaction and quadratic effect used to explain the relationship of the explanatory variables with the criterion variable. We collected cross-sectional data from the two most renowned Chinese online shopping platforms (B2C) of total 15,621 product links. Results show that higher number of reviews with a low ratio of picture reviews response negative effect on rating, whereas the lower number of reviews with a high ratio of picture reviews response positive effect on the rating. In overall picture in the reviews improve the online seller product rating. For the moderation effect, results show that price and brand familiarity have a positive interaction effect on the relation of pictured reviews and rating whereas experience goods have less negative effect comparing search goods. Finally, local brand has less negative interaction effect comparing foreign brand to pictured reviews and rating.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.61-66
• /
• 2016

In order to improve the bonding efficiency of starch adhesives and water resistance of corrugated board, mixing ratio of additives dosage was changed and its effects were analyzed. When the additives dosage was increased, bonding strength, vertical compression strength, bursting strength and water resistance were increased, because of hydroxyl groups or acetyl groups in starch adhesives and cellulose fibers of corrugated board were cross-linked by additives. When 1.0% glyoxal dosage was added, flat crush strength and vertical compression strength were increased. With 1.5% glyoxal, bonding strength and bursting strength were increased. However, 2.0% glyoxal dosage was added, most of strength except bursting strength were decreased. Thus, when the appropriate amount of additives are added during corrugated board production process, increased bonding efficiency of starch adhesives and higher water resistance of corrugated board can be achieved.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.750-756
• /
• 2002

The effect of equivalence ratio and velocity on the stability of flame in dump combustor was studied in an atmospheric pressure, laboratory scathe dump combustor operating natural gas. Traditionally, peak-to-peak pressure, fluctuation of the heat release rate and Rayleigh index were used to find and control the combustion instability. Cross correlation coefficients, Ci,j which is defined as the normalized value of the integration of the product of two of the mixer pressure, dump plane pressure and heat release rate, are introduced to see whether the flame is stable or not. Ci,j shows more sensitive to combustion status than Rayleigh index in steadily burning flame. Also, the result indicates that the amplitude of Ci,j between heat release and mixer pressure goes up before the flame at the rich de-stabilizing equivalence ratio near $\psi$=0.85. t means Ci:j at this case has a potential to detect the de-stablizing moment in prior to becoming unstable in dump combustor.