• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.285-293
• /
• 2013

This study was to investigate which predictors influenced the wish to undergo cosmetic surgery according to experience of cosmetic surgery in female college students. A cross-sectional descriptive design was used with self-report questionnaires, which were completed by 254 subjects. Data was analyzed with t-test and regression. There were statistically significant differences in acceptance and social motivation of cosmetic surgery and the wish to undergo cosmetic surgery in the future between the two groups. Body area satisfaction and acceptance of cosmetic surgery were significant predictors to the wish to undergo cosmetic surgery in the non-experienced group. The significant predictor of the wish to undergo cosmetic surgery for the experienced group was acceptance of cosmetic surgery. The findings from this study suggest that there is need to different approaches to discuss or council for wish to undergo cosmetic surgery according to individual cosmetic surgery experience.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.106-115
• /
• 2010

The purpose of this study was to evaluate the microtensile bond strength (${\mu}TBS$), failure modes and bonding interfaces of self-etching and three self-adhesive resin cements to dentin and indirect composite resin. Cylindrical composite blocks (Tescera, Bisco Inc.) were luted with resin cements (PA: Panavia F 2.0, Kuraray Medical Inc., RE: RelyX Unicem Clicker, 3M ESPE., MA: Maxem, Kerr Co., BI: BisCem, Bisco Inc.) on the prepared occlusal dentin surfaces of 20 extracted molars. After storage in distilled water for 24 h, $1.0\;mm\;{\times}\;1.0\;mm$ composite-dentin beams were prepared. ${\mu}TBS$ was tested at a cross-head speed of 0.5 mm/min. Data were analyzed with one-way ANOVA and Tukey's HSD test. Dentin sides of all fractured specimens and interfaces of resin cements-dentin or resin cements-composite were examined at FESEM (Field Emission-Scanning Electron Microscope). In conclusion, PA and RE showed higher bond strength and closer adaptation than MA and BI when indirect composite blocks were luted to dentin using a self-etching and three self-adhesive resin cements.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.457-462
• /
• 2005

Polyurethane foams (PUFs) were prepared from polymeric 4,4'-diphenylmethane diisocyanate (PMDI), mixed polyol with OH value of 480, silicone surfactant, three catalysts, and hydrofluorocarbon(HFC) as blowing agent. Balance (PC-8), gelling (33LV), and trimerization (TMR-2) catalysts were used. The effect of the catalysts on the physical properties of PUF with increase of isocyanate (NCO) index and aging time was investigated. The cell size of the PUF with PC-8 and 33LV slightly increased with an increase in NCO index from 100 to 170 but compressive strength did not change significantly. In case of trimerization catalyst, the compressive strength of PUF increased from 8.75 to 1$10.5 kg_f/cm^2$ and the cell size decreased with an increase in NCO index. The compressive strength of the PUF with 33LV increased from 9.21 to $10.15 kg_f/cm^2$ with an increase in aging time. However, there was no detectable change in the compressive strength of PUF with TMR-2. A possible interpretation of the results includes an additional cross-link reaction of non-reacted MDI and FTIR spectrum illustrated the change of NCO peak.

• Korea journal of population studies
• /
• v.25 no.1
• /
• pp.33-50
• /
• 2002

This study examines cross-national patterns of asymmetry of marriage tables with respect to educational level and tries to measure the degree of gender inequality across nations. A Primary assumption of the study is that gender inequality inhibits symmetric marriage between men and women. As men and women differ more in status, the rate of symmetric marriage between them declines thus producing asymmetric marriage with respect to social status. More specifically, the main object of the study is to develop statistical models and index with which to assess the patterns and degree of asymmetric marriage. Additionally, it is intended to assess the appropriateness of several theoretical perspectives for explaining these variations identified by the statistical models. Two most important such perspectives are industrialism and theory of politics and culture. To answer these questions, this study relies on twenty-seven marriage tables with respect to educational level, some from published tables, and some extracted from other sources. The main findings of the study are: (1) compared to less industrialized countries, more industrialized countries have lower degrees of asymmetric marriage(gender inequality) with respect to educational level, and (2) other things being equal, differences in politics and culture seem to have the some impact on marriage pattern; for instance, social democracy and state socialism reduce the degree of asymmetric marriage while the high emphasis on gender-based hierarchy in Asian countries seems to increase it In short, these results suggest a weaker or modified version of industrialists That is, while with economic growth most nations show a decline in the degrees of asymmetric marriage with respect to social status, for some nations the degrees of asymmetric marriage are affected by their specific politics or cultures.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.531-536
• /
• 2009

Radial variations of ray spacing and frequency of biseriate ray were examined in the woods of most commercially important Korean softwood species of Pinus koraiensis and Larix kaempferi. Ray spacing, or ray number per mm in cross section, averaged 4.6 and 9.0 in Pinus koraiensis and Larix kaempferi, respectively. Thus, rays of Larix kaempferi appeared to be more closely arranged than those of Pinus koraiensis. Ray spacing was the densest around pith, and then slowly decreased toward bark. In tangential section, biseriate ray frequency of Larix kaempferi was higher than that of Pinus koraiensis. Biseriate ray was designated, based on the number of cells of biseriate portion in vertical extent, as the type of B+1 (one cell high), B+2 (two cells high), and so on. The dominated type was B+1 in Pinus koraiensis but B+2 in Larix kaempferi. The biseriate ray types of B+3, B+4, and B+5 were occasionally found in earlywood. Interestingly, even B+6 and B+7 types were observed in Larix kaempferi. In conclusion, it was considered that ray spacing could be used for separating juvenile wood from adult wood. Also, characteristics of ray spacing and biseriate ray might be used for identifying these two species.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.65-72
• /
• 2003

This study was focused on the investigation of filtration characteristics of membrane-coupled fermentor system for dissolved organics recovery from liquid organic sludge. On the filterability of MF over the range of $0.1{\sim}5 {\mu}m,$ the magnitude of total membrane resistance ($R_t$) is ranged as follows in the order; $0.1 {\mu}m>0.2{\mu}m>0.5 >1{\mu}m>2{\mu}m>5{\mu}m$. The cake layer resistance ($R_c$) occupied about 68~88% of total resistance with fermented sludge. Permeation flux decline was mainly attributed to the $R_c$, which was formed by a strong deposition from physico-chemical interactions of solids on membrane surface. Higher suspended solids (SS) concentration of suspension caused lower permeation flux. However, there was not a proportion relation beyond a certain SS concentration. The cross-flow velocity on the membrane surface was faster, which resulted in the higher permeation flux and also more efficient with low trans membrane pressure (TMP) in viewpoint of energy efficiency. The appropriate pH of suspension was over the range of 5.0~6.0 for dissolved organics recovery as well as the permeation flux. It is possible f3r bacteria to be separated perfectly with $0.1{\mu}m\; and \;0.2{\mu}m$ membrane pore size. Based on experimental results, most appropriate membrane pore size for the recovery is believed to around $1{\mu}m$.

• Weed & Turfgrass Science
• /
• v.2 no.2
• /
• pp.184-190
• /
• 2013

It is important for genetic resources to collect and identify in native medium-leaf type zoysiagrasses species distributed in Korea. This study was conducted to investigate morphological variation and characteristics of native medium-leaf type zoysiagrasses from coastal, island and inland regions in Korea. Among them, 75 collected lines was confirmed to have various morphological variations, accessions were classified into 2 main based group coastal and inland regions by morphological characteristics and site environment. Group I included Z. sinica type, this group showed 3.7 mm in leaf width, 29 in number of seed per spikelet and 5.0 mm in seed length. Group II included Z. japonica type, this group showed 4.4 mm in leaf width, 42 in number of seed per spikelet and 3.5 mm in seed length. There is a need for additional research on growth characteristics and the molecular level for the introgressive hybridization between species which confirmed that cross-pollination is possible due to protogyny. The individuals showing variations should be preserved as valuable genetic resources for the expansion of variations in zoysiagrasses, and the results of this investigation on the genetic resources collected will be highly valuable in breeding high quality turfgrass.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.4 s.28
• /
• pp.542-554
• /
• 1989

The skyrocketing inflation of medical costs has become a major health problem among most developed countries. Korea, which recently covered the entire population with National Health Insurance, is facing the same problem. The proportion of health expenditure to GNP has increased from 3% to 4.8% during the last decade. This was remarkable, if we consider the rapid economic growth during that time. A few policy analysts began to raise cost containment as an agenda, after recognizing the importance of medical cost inflation. In order to Prepare an appropriate alternative for the agenda, it is necessary to find out reasons for the cost inflation. Then, we should focus on the reasons which are controllable, and those whose control are socially desirable. This study is designed to articulate the theory of medical cost inflation through literature reviews, to find out reasons for cost inflation, by analyzing aggregated data with a deterministic model. Finally to identify determinants of changes in both medical demand and service intensity which are major reasons for cost inflation. The reasons for cost inflation are classified into cost push inflation and demand pull inflation, The former consists of increases in price and intensity of services, while the latter is made of consumer derived demand and supplier induced demand. We used a time series (1983-1987), and cross sectional (over regions) data of health insurance. The deterministic model reveals, that an increase in service intensity is a major cause of inflation in the case of inpatient care, while, more utilization, is a primary attribute in the case of physician visits. Multiple regression analysis shows that an increase in hospital beds is a leading explanatory variable for the increase in hospital care. It also reveals, that an introduction of a deductible clause, an increase in hospital beds and degree of urbanization, are statistically significant variables explaining physician visits. The results are consistent with the existing theory, The magnitude of service intensity is influenced by the level of co-payment, the proportion of old age and an increase in co-payment. In short, an increase in co-payment reduced the utilization, but it induced more intensities or services. We can conclude that the strict fee regulation or increase in the level of co-payment can not be an effective measure for cost containment under the fee for service system. Because the provider can react against the regulation by inducing more services.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.3 s.58
• /
• pp.623-629
• /
• 1997

This is cross-sectional study to evaluate a potential relationship between air conduction hearing threshold and blood viscosity in normal adult males(n=1677). We measured hearing threshold in frequency level at 500, 1000, 2000, 4000Hz by pure-tone audiometry and RBC profiles containing red cell number, hemoglobin, hematocrit. Blood viscosity are replaced by hematocrit that are one major factor of influencing blood viscosity. PTAs(pure-tone averages) are measured by hearing threshold averages level at 500Hz, 1000Hz, 2000Hz. Grades of PTAs(pure-tone averages) are divided three groups that are less then 10.0dB group, between 10.0-19.9dB group and excess 20.0dB. The results shows significant association among hematocrit, red cell number and hearing loss(age adjust by ANACOVA).

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.123-127
• /
• 2013

A new spray chrysanthemum (Dendranthema grandiflorum) 'Blue Hope' was bred by the Flower Research Institute, Gyeongsangnam-do Agricultural Research & Extension Services in 2009. The cultivar 'Blue Hope' was initially derived from the cross in 2005 between 'Ford', a spray chrysanthemum cultivar, with white anemone type, and 'Chopin', a spray chrysanthemum cultivar with white anemone type. The cultivar has anemone type with white petals. After the evaluation of the characteristics under shade culture in summer and retarding culture in spring and consecutive selection from 2007 to 2009, 'Blue Hope' was selected finality. The natural flowering time of 'Blue Hope' was October 24th, and year-round flowering is possible by shading or lighting treatment. The growth of plant was very vigorous and response time 6.5 weeks. The diameter of flower was 4.9 cm. Number of flowers per stem was 19.1 in autumn. Days to flowering under the short day treatment was about 45 in spring and its vase life was 23.8 days in the autumn season. This cultivar was resistance white rust and consumer's preference of new spray is high level than the control.