• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.31-32
• /
• 2006

We describe the preparation of nanostructured molecularly-imprinted surfaces using nanomolding on porous alumina. In molecular imprinting functional and cross-linking monomers are copolymerized in the presence of a molecular template, resulting in synthetic receptor materials. The drug propranolol and the dye fluorescein were used as the molecular imprinting templates. Binding studies with imprinted and non-imprinted surfaces revealed specific recognition of the templates and thus the existence of selective binding sites. In addition, the surface properties of the films were studied by water contact angle measurements. It was found that, depending on the monomers used, certain nanostructures induced great changes in the wetting properties of the surface.

• Macromolecular Research
• /
• 제16권1호
• /
• pp.45-50
• /
• 2008

This study examined the swelling behavior and in vitro release of a model drug, tetracycline-HCl, from alginate and alginate-polyaspartate (Alg-PASP) composite gel beads. The alginate and Alg-PASP composite beads were prepared using an ionic crosslinking method with aqueous $Ca^{2+}$. Their microporous morphology was observed by scanning electron microscopy. The swelling ratio of the beads in different media varied according to their composition, cross-linking density ($Ca^{2+}$ concentration), and pH of the aqueous medium. The in vitro release experiment of the tetracycline-HCl encapsulated beads in different media suggests that the release of the drug is governed mainly by the swelling properties of the polymer network. The presence of PASP was found to significantly influence the swelling properties and drug release profile.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.134-140
• /
• 2006

The effect of surface treatment of fillers on the mechanical, electrical properties, and tracking performance of silicone rubber insulators have been investigated. For base polymer, $\alpha,\;\omega$) vinyl poly(dimethyl-methylphenyl) siloxane(VPMPS) containing dimethyl siloxane and methylphenyl siloxane was prepared by the equilibrium polymerization. High voltage silicone rubber composites(HVSRC) were prepared from VPMPS, nano-silica, and alumina trihydrate (ATH) modified by various coupling agents. Bound rubber of uncured silicone rubber, cross-linking density of the vulcanizate as well as the mechanical, electrical properties, and tracking performance were measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.99-102
• /
• 1994

The use of preformed polymers and their cross-linking have been a attempted in order to improve the intrinsic fraqility of monolayers and Langmuir-Blodgett (LB)films and to make their technological applications possible. It has shown that an imidization followed a polyion-complexation can stabilize the LB films against heat and solvents. And when the polymer structure was properly designed concurrent removal of the alkyl tails together with imide formation could be accomplished. In this paper we present a characteristic monolayer behavior of polymer with pendent polythers and carboxyls it’s polyion-complexed LB film with subphase polymer PAA and a possible skeletonization of the LB film by thermal imidization. Also deposition status of LB films are evaluated by using QCM

• Bulletin of the Korean Chemical Society
• /
• 제17권11호
• /
• pp.1040-1044
• /
• 1996

The catalytic dehydrocoupling of bis(1-sila-3-butyl)benzene, 1 by Cp2ZrCl2/Red-Al and Cp2ZrCl2/n-BuLi combination catalysts yielded a mixture of oily and solid polymers. While the catalytic dehydrocoupling of 2-phenyl-l,3-disilapropane, 2 by Cp2ZrCl2/n-BuLi combination catalyst produced a mixture of oily and solid polymers, the catalytic redistribution/dehydrocoupling of 2 by Cp2ZrCl2/Red-Al combination catalyst gave oily polymer. The dehydrocoupling of 1 and 2, unless the prior silane redistribution occurs, seems to initially produce a low-molecular-weight polymer, which then undergoes an extensive cross-linking reaction of backbone Si-H bonds, leading to an insoluble polymer.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.753-761
• /
• 2014

We propose a two-step UV irradiation procedure to fabricate polymer-dispersed liquid crystal (PDLC) films by lamination. During the first UV treatment, before lamination, the UV-curable monomers coated on one film substrate are solidified through photo-polymerization as the phase separation between the liquid crystals and the monomers. Introducing an adhesion-enhancement layer on the other plastic substrate and controlling the UV irradiation conditions ensure that UV-induced cross-linkable functional groups remain on the surfaces of the photo-polymerized layers. Thereby, the adhesion stability between the top and bottom films is much improved during a second (post-lamination) UV treatment by further UV-induced cross-linking at the interface. Because the adhesion-enhancement and PDLC layers prepared by the bar-coating process are solidified before lamination, the PDLC droplet distribution and the cell gap between the two plastic substrates remain uniform under the lamination pressure. This ensures that the voltage-controlled light transmittance is uniform across the entire sample.

• Bulletin of the Korean Chemical Society
• /
• 제18권3호
• /
• pp.318-323
• /
• 1997

ο-(2-Vinyloxyethoxy)benzylidenemalononitrile (3a) and methyl ο-(2-vinyloxyethoxy)-benzylidenecyanoacetate (3b), m-(2-vinyloxyethoxy)benzylidenemalononitrile (4a), and methyl m-(2-vinyloxyethoxy)benzylidenecyanoacetate (4b) were prepared by the condensation of ο-(2-vinyloxyethoxy)benzaldehyde (1) and m-(2-vinyloxyethoxy)benzaldehyde (2) with malononitrile or methyl cyanoacetate, respectively. Bifunctional vinyl ether monomers 3a and 3b polymerized quantitatively with radical initiators in γ-butyrolactone solution at 65 ℃, while meta-isomers 4a and 4b gave lower yields of polymers under the same conditions. The polymers 5-6 obtained from the monomers 3-4 were insoluble in common solvents due to cross-linking. Under the same polymerization conditions ethyl vinyl ether polymerized well with model compounds ο-methoxybenzylidenemalononitrile 7a, methyl ο-methoxybenzylidenecyanoacetate 7b, m-methoxybenzylidenemalononitrile 8a, and methyl m-methoxybenzylidenecyanoacetate 8b, respectively, to give 1:1 alternating copolymers 9-10 in high yields. Cross-linked polymers 5-6 showed a thermal stability up to 300 ℃, and showed a double phase degradation pattern in their TGA thermograms. Polymers 5-6 showed broad endothermic bands around 75-110 ℃ without any characteristic Tg peaks in DSC thermograms. Alternating copolymers 9-10, except copolymer 9b were soluble in common organic solvents. The inherent viscosities of polymer 9-10 were in the range of 0.35-0.62 dL/g. Polymer films cast from acetone solution were cloudy and tough and Tg values obtained from DSC thermograms were in the range of 118-165 ℃.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.629-636
• /
• 2012

Volume shrinkage behavior accompanying the cure of resin formulations might be a critical factor when assembly processes using polymer materials are considered. In this study, cure shrinkage behavior with respect to resin formulation type and heating method was measured on sandwich structure samples by a thermomechanical analyzer (TMA). Quartz, used as a cover material for the sandwich structure, indicated the coefficient of thermal expansion close to $0ppm/^{\circ}C$. When a dynamic heating mode was conducted, a squeeze-out region and a cross-linking region for each resin formulation could be separated clearly with overlapping differential scanning calorimeter results on the TMA results. In addition, a cure shrinkage dominant region and a thermal expansion dominant region in the cross-linking region were distinguished. Consequently, the degree of cure at the initiation of the thermal expansion dominant region was successfully measured. Measurement of all resin formulations indicated the thermal expansion behavior exceeded cure shrinkage before full cure.

• Korean Membrane Journal
• /
• 제10권1호
• /
• pp.1-7
• /
• 2008

Polystyrene-co-divinylbenzene (PS-co-DVB) asymmetric membranes were prepared. In order to control their structure and mechanical properties the degree of cross-linking and the composition of casting solution were varied. The rubber added PS-DVB membranes was also prepared to overcome the mechanical limitation of cross-linked membrane, and their mechanical properties were investigated. It was revealed that the concentration of polymer in the casting solution affected the determination of skin formation. When the PS-co-DVB membrane consists of styrene-butadiene (SB) rubber or liquid polybutadiene (PBD), the structures formed showed that the PS content in the PS/DVB system played an important role in determining the porous sublayer structure.

• 폴리머
• /
• 제39권3호
• /
• pp.394-402
• /
• 2015

폴리아크릴로니트릴(PAN) 필름에 히드록실아민(HA)을 반응시켜 히드록시기와 아민기를 생성시키고, 히드라진으로 처리하여 가교결합을 도입시키는 방법을 검토하였다. HA와 히드라진을 각각 처리하거나 2단계 또는 동시 처리하여 개질시킨 PAN 시료들의 반응도, 물 및 N,N'-디메틸포름아미드(DMF) 팽윤도, FTIR 스펙트럼, 원소함량, 열분석 결과들을 분석하여 효율적으로 기능기와 가교결합을 도입시키는 방법을 제시하였다. PAN 필름은 HA와의 반응에 의해 기능기가 도입되고 친수성이 향상되지만 형태안정성이 감소하며, 히드라진 처리에 의해 DMF 팽윤도가 감소한다. 히드라진 및 HA를 2단계로 처리하면 형태안정성은 향상되지만 기능기 도입이 어려워지고, 히드라진과 HA를 동시에 처리하면 형태안정성과 친수성을 효율적으로 향상시킬 수 있다.