• 한국분무공학회지
• /
• 제25권1호
• /
• pp.8-14
• /
• 2020

Recently, 1-D model-based engine development using virtual engine system is getting more attention than experimental-based engine development due to the advantages in time and cost. Injection rate profile is the one of the main parameters that determine the start and end of combustion. Therefore, it is essential to set up a sophisticated model to accurately predict the injection rate as starting point of virtual engine system. In this research, procedure of 1-D model setup based on AMESim is introduced to predict the dynamic behavior and injection rate of diesel injector. As a first step, detailed 3D cross-sectional drawing of the injector was achieved, which can be done with help of precision measurement system. Then an approximate AMESim model was provided based on the 3D drawing, which is composed of three part such as solenoid part, control chamber part and needle and nozzle orifice part. However, validation results in terms of total injection quantity showed some errors over the acceptable level. Therefore, experimental work including needle movement visualization, solenoid part analysis and flow characteristics of injector part was performed together to provide more accuracy of 1-D model. Finally, 1-D model with the accuracy of less than 10% of error compared with experimental result in terms of injection quantity and injection rate shape under normal temperature and single injection condition was established. Further work considering fuel temperature and multiple injection will be performed.

• 한국실내디자인학회논문집
• /
• 제15권4호
• /
• pp.106-114
• /
• 2006

The purposes of natural science museums are to educate the general public on the principles and application of science, and help them understand various aspects of science technology. Data should be analyzed by considering these educational aspects of exhibition, and the methods of presenting exhibits should be decided. Accordingly, the composition of exhibition contents with various exhibition elements has an important role at natural science museums. The relation and structure of exhibition themes are significant factors in helping visitors understand the principles of science and a system of viewing circulation can be used as an important tool for understanding the flow of exhibition. In other words, at the planning stage for the composition of exhibition contents, the relation of exhibition themes as well as the circulation patterns of viewers can induce active viewing behaviors. Therefore, centering on the patterns of viewing circulation as well as on the connectivity of exhibition themes at natural science museums, the purposes of this research are: 1) to conceptualize the composition of exhibition contents; and 2) to find elements that can induce active viewing behaviors by analyzing visitors' viewing behaviors. This research was establishing an analytical indicator of contact for viewing behaviors observed from the composition of exhibition scenarios, the active viewing patterns of engagement, first contact, and repeated contact were analyzed. First, a composition pattern with a high participation rate, in contact with exhibits, was found to induce an overall-viewing circulation and have a big ring of the composition of exhibition themes. Second, by inducing a partial-viewing circulation pattern, a high rate of first contacts was observed from a ring pattern of theme connection. Even for the structure with theme connection with depth, a high frequency of contacts with various exhibits was found when exhibition themes have a ring pattern. Third, the repeated contacts were mostly found in the form of scenarios, which has a successive structure of ring and cross patterns.

• 설비공학논문집
• /
• 제27권9호
• /
• pp.475-483
• /
• 2015

In Korea, a typically hot and humid summer means that air-conditioners consume a large quantity of electricity; accordingly, the simultaneous usage of an indirect evaporative cooler may reduce the sensible-heat level and save the amount of electricity that is consumed. In this study, the heat-transfer and pressure-drop characteristics of an indirect evaporative cooler made of paper/plastic film were investigated under both dry and wet conditions; for the purpose of comparison, an indirect evaporative cooler made of plastic film was also tested. Our results show that the indirect evaporative efficiencies under a wet condition are greater than those under a dry condition, and the efficiencies of the paper/plastic sample (109% to 138%) are greater than those (67% to 89%) of the plastic sample; in addition, the wet-surface, indirect evaporative efficiencies of the paper/plastic sample are 32% to 36% greater than those of the plastic sample. Further, the wet-surface pressure drops of the paper/plastic sample are 13% to 23% larger than those of the plastic sample, and this might have been caused by the surface roughness of the samples. A rigorous heat-transfer analysis revealed that, for the plastic sample, 30% to 37% of the wet channels remained dry, whereas all of the channels were wet for the paper/plastic sample.

• 한국가스학회지
• /
• 제24권1호
• /
• pp.49-55
• /
• 2020

산업용 혹은 발전용 가스터빈에 사용되는 이중 콘형 예혼합 연소기의 다단 연소 특성을 이해하기 위하여 실험적연구를 수행하였다. 이를 위하여 기존에 모두 경사면에 공급되는 연료를 콘부분으로 일부 할애하는 방식으로 다단연소 방식을 구성하였으며 콘에서 분사되는 연료공급은 축방향과 콘 경사면 방향으로 하였다. 다단연소 연소특성을 이해하기 위하여 콘에서의 연료 분사 방향과 연료 분배율 변화에 대한 NOx와 CO의 배출 농도 그리고 벽면 온도분포를 측정하였다. 그 결과 총 연료에 대한 콘으로의 분배율이 3%인 경우 콘에서의 연료 분사방향에 관계없이 노즐내의 예혼합 영역에서 연료가 공기와 균일하게 혼합됨으로서 연소영역의 고온점 감소에 의하여 NOx 배출 농도가 감소된다. 그러나 콘에서 축방향으로 분사되는 연료분배율이 8%로 증가하는 경우 노즐 내부 예혼합 영역으로의 화염 역화로 인하여 NOx의 배출농도가 오히려 증가하게 된다.

• 한국가스학회지
• /
• 제24권4호
• /
• pp.25-31
• /
• 2020

산업용 혹은 발전용 가스터빈에 사용되는 이중 콘형 예혼합 연소기의 연소 특성을 이해하기 위하여 실험적 연구를 수행하였다. 노즐의 여러 연료 분사 방식에 대하여 NOx와 CO의 배출 특성, 화염 안정성 및 연소실 온도 분포에 대한 연소특성을 비교하였다. 주 연구 결과로는 연료홀 개수가 동일하고 연료 홀 직경이 감소하는 경우와 연료 홀면적이 동일하고 연료 홀 수가 감소되는 경우 연료의 연소용 공기층 침투가 커지기 때문에 NOx의 배출은 감소하지만 화염 안정성은 감소하게 된다. 그리고 동일 연료 홀 면적을 이용하는 분사방식에 있어서 연료 홀을 교차 변경하는 경우 연료의 평균 침투거리 증가로 NOx의 배출이 감소되며 연료 침투거리가 적은 연료가 화염을 안정화시키는 역할을 한다.

• Physical Therapy Rehabilitation Science
• /
• 제10권1호
• /
• pp.40-47
• /
• 2021

Objective: The purpose of this study is to prove the reliability and validity of the Power breath K5 and to compare it with pony FX. Power breathe K5 is one type of device can assess automatically Maximum inspiratory pressure (MIP), Peak inspiratory pressure, Peak inspiratory flow (PIF). Design: Cross-sectional study. Methods: Thirty-five COPD patients participated in the test to investigate for the intra relater reliability and concurrent validity. The tests MIP, Vital capacity (VC), PIF were measured by Powerbreathe K5 and Pony Fx. Data was analyzed by intraclass correlation reliability (ICC) value and a standard error of measurement and Bland-Altman plots for reliability and pearson correlation for validity. Results: Intra rater reliability of the Powerbreathe K5 was very high at MIP (ICC=0.977 95%CI 0.956~0.989, SEM=8.665, MDC=0.295), PIF (ICC=0.966 95%CI 0.933~0.93, SEM=8.665, MDC=0.295), VC (ICC=0.949 95CI 0.902~0.974, SEM=0.042, MDC=0.116). The Powerbreath K5 was significant correlation compared with Pony Fx in assessment for MIP (r=0.971, p<0.05) and vital capacity (r=0.534, p<0.05). Conclusion: In this study, We investigated the clinical usefulness of the Powerbreath K5 in evaulating the MIP, VC and PIF with COPD patients with high reliability and validity.

• 한국추진공학회지
• /
• 제24권5호
• /
• pp.13-20
• /
• 2020

초음속 연소기에서 공동 사이의 상대적인 거리가 연소 성능에 미치는 영향을 실험적으로 연구하였다. 사각형 단면 형상에서 마주보는 두 면에 각각 공동형 보염기가 1개씩 있고, 공동 사이의 거리가 135 mm, 220 mm 인 두 가지 형상을 사용하였고, 연료 당량비는 0.16과 0.38로 변경하였다. 직결형 시험 장치를 사용하여 마하 2.0 유동 조건을 조성하였다. 시험 결과 공동 사이의 거리가 가까운 경우에 연소 압력이 더 높았다. 그러나 연료 유량 변화에 의한 연소 압력 변화는 크지 않았다. 추가적인 연소 압력 상승을 얻기 위해서는 보염기 사이의 거리를 더욱 좁히거나 동일면에 보염기를 설치하는 등의 다른 연소기 형상 변화가 있어야 함을 판단하였다.

• 대한정형외과학회지
• /
• 제56권6호
• /
• pp.540-545
• /
• 2021

슬개골 횡골절은 수술이 필요한 전위된 슬개골 골절의 가장 흔한 형태이다. 이러한 슬개골 횡골절은 골절선을 지나 평행하게 삽입된 Kirschner-강선이나 나사못에 장력대 강선을 추가적으로 고정한 기법이 흔히 사용된다. 그러나 고식적인 고정 방법의 경우 삽입된 강선이나 핀의 돌출에 의한 합병증이 흔히 발생한다. 이러한 합병증은 내고정물의 제거를 위한 추가적인 수술을 필요로 하고, 의료비 상승 및 슬관절의 기능 제한을 일으킬 수 있다. 이에 슬개골 횡골절에 대해 안정적인 고정력을 제공하고 수술 시 연부조직 손상을 최소화하여 골절부 혈류를 보존하고 수술 후 통증을 감소시키며, 내고정물에 의한 자극과 그에 따른 통증을 감소시켜 관절 운동 제한 발생 위험을 감소 시키는 최소 침습 부하 분산 경피적 슬개건 봉합술을 이용하여 치료한 사례들을 수술 술기와 함께 보고하고자 한다.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.101-104
• /
• 2022

Mist-CVD is known to have advantages of low cost and high productivity compared to ALD and PECVD methods. It is capable of reacting to the substrate by misting an aqueous solution using ultrasonic waves under vacuum-free conditions of atmospheric pressure. In particular, Ga₂O₃ is regarded as advanced power semiconductor material because of its high quality of transmittance, and excellent electrical conductivity through N-type doping. In this study, Computational Fluid Dynamics were used to predict the uniformity of the thin film on a large-area substrate. And also the deposition pattern and uniformity were analyzed using the flow velocity and particle tracking method. The uniformity was confirmed by quantifying the deposition cross section with an FIB-SEM, and the consistency of the uniformity prediction was secured through the analysis of the CFD distribution. With the analysis and experimental results, the match rate of deposition area was 80.14% and the match rate of deposition thickness was 55.32%. As the experimental and analysis results were consistent, it was confirmed that it is possible to predict the deposition thickness uniformity of Mist-CVD.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.777-782
• /
• 2004

액상응결 공정법과 일축가압성형법으로 제조된 기판위에 전해질과 양극층을 스크린 인쇄법으로 구성한 후 열처리함으로써 최종크기가 $5\times5cm^2$인 SOFC 단전지를 제조하였다. 본 연구에서는 이들 단전지와 인코넬 합금으로 제조된 접속자 그리고 가스켓형의 밀봉재를 이용하여 스택을 구성하였다. 본 연구에 사용된 스택은 연료가스와 산화가스가 교차되는 형태의 가스채널을 가지며 가스매니폴드가 내부에 구성되어 있는 형태로 설계되었다. 제작된 3단 스택의 성능을 평가해 본격과 15W 정도의 최고출력을 나타내었는데 이는 단전지 출력성능으로부터 예측된 최고출력치의 $50\%$ 정도에 해당되는 출력이었다. 본 연구에서는 이러한 스택성능에 영향을 주는 조정인자들과 스택디자인 인자들에 대한 분석을 수행하였다.