• Journal of the Korean Wood Science and Technology
• /
• 제47권1호
• /
• pp.33-39
• /
• 2019

The square timbers of larch having cross section of $90mm{\times}90mm$ were glued laterally to be formed $1,200mm{\times}2,400mm$ panels which were used as cores for CLT wall panels. Then, structural plywood panels having size of $1,200mm{\times}2,400mm$ were used as cross band covering the small square timber cores to manufacture CLT wall panels. The sound absorption rate of CLT wall panels and polyester board attached CLT wall panels were investigated. The mean sound absorption coefficients of the former and the latter in the frequency range of 100-6400 Hz were 0.21 and 0.74, respectively. The noise reduction coefficients (NRC) of those were 0.21 and 0.40, respectively. Also, the mean sound transmission loss of CLT wood panel in the frequency range of 50-1600 Hz was 45.12 dB and that value at the frequency of 500 Hz was 42.49 dB. It was suggested that the polyester board attached CLT wall panels could be used as housing wall because of its high sound absorption rate and high sound transmission loss.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권6호
• /
• pp.1849-1876
• /
• 2022

Wireless Sensor Network (WSN) is considered as an integral part of the Internet of Things (IoT) for collecting real-time data from the site having many applications in industry 4.0 and smart cities. The task of nodes is to sense the environment and send the relevant information over the internet. Though this task seems very straightforward but it is vulnerable to certain issues like energy consumption, delay, throughput, etc. To efficiently address these issues, this work develops a cross-layer model for the optimization between MAC and the Network layer of the OSI model for WSN. A high value of duty cycle for nodes is selected to control the delay and further enhances data transmission reliability. A node measurement prediction system based on the Kalman filter has been introduced, which uses the constraint based on covariance value to decide the scheduling scheme of the nodes. The concept of duty cycle for node scheduling is employed with a greedy data forwarding scheme. The proposed Duty Cycle-based Greedy Routing (DCGR) scheme aims to minimize the hop count, thereby mitigating the energy consumption rate. The proposed algorithm is tested using a real-world wastewater treatment dataset. The proposed method marks an 87.5% increase in the energy efficiency and reduction in the network latency by 61% when validated with other similar pre-existing schemes.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1789-1803
• /
• 2022

RAST-F is a new full-core analysis code based on the two-step approach that couples a multi-group cross-section generation Monte-Carlo code MCS and a multi-group nodal diffusion solver. To demonstrate the feasibility of using MCS/RAST-F for fast reactor analysis, this paper presents the coupled nodal code verification results for the MET-1000 and CAR-3600 benchmark cores. Three different multi-group cross-section calculation schemes are employed to improve the agreement between the nodal and reference solutions. The reference solution is obtained by the MCS code using continuous-energy nuclear data. Additionally, the MCS/RAST-F nodal solution is verified with results based on cross-section generated by collision probability code TULIP. A good agreement between MCS/RAST-F and reference solution is observed with less than 120 pcm discrepancy in k_eff and less than 1.2% root-mean-square error in power distribution. This study confirms the two-step approach MCS/RAST-F as a reliable tool for the three-dimensional simulation of reactor cores with fast spectrum.

• 한국의류학회지
• /
• 제47권4호
• /
• pp.609-624
• /
• 2023

This study aimed to explore the effects of perceived benefits on consumers' attitudes towards cross-border online shopping websites. We also explore whether and how consumers' COVID-19 anxiety and brand familiarity weaken or strengthen the relationship between these perceived benefits and consumer attitudes. A total 319 items of data were used for the final analysis. The perceived benefits of a website were found to have only an indirect effect on purchase intentions by mediating consumers' attitudes toward the site. Competitive pricing of fashion products directly affected purchase intentions. COVID-19 anxiety was found to have a negative moderating influence on the relationship between perceived enjoyment and consumer attitudes, whereas brand familiarity had a positive moderating effect on both the relationships between perceived usefulness and consumers' attitudes toward the site and between perceived ease of use and their site attitude. This study provides useful insights for international e-tailers in developing marketing strategies that attract international consumers. Academically, we have contributed to the existing literature on the perceived benefits of global online shopping and the moderators of consumers' attitudes towards e-commerce sites.

• 농업과학연구
• /
• 제50권4호
• /
• pp.645-652
• /
• 2023

The aleurone layer in maize is crucial as it contains essential nutrients such as minerals, vitamins, and high-quality proteins. While most of the maize varieties are known to possess a single aleurone layer, several multi-aleurone layer mutants and landraces have been suggested for hierarchical genetic control of aleurone development. Conventional microscopy analysis often involves using immature seeds or sampling only a portion of the kernel sample, and whole kernel section analysis using a microtome is technically difficult and time-consuming. Additionally, the larger size of maize kernels posed challenges for comprehensive cross-sectional analysis compared to other cereal crops. Consequently, this study aimed to develop an efficient method to comprehensively understand the aleurone layer characteristics of the entire cross-section in maize. Through observations of diverse maize genetic resources, we confirmed irregular aleurone layer patterns in those with multiple aleurone layers, and we discovered a landrace having multiple aleurone layers. By selectively identifying genetic resources with multiple aleurone layers, this method may contribute to efficient breeding processes in maize.

• Journal of Microbiology and Biotechnology
• /
• 제27권3호
• /
• pp.552-560
• /
• 2017

Quorum quenching (QQ) bacteria entrapped in a polymeric composite hydrogel (QQ medium) have been successfully applied in membrane bioreactors (MBRs) for effective biofouling control. However, in order to bring QQ technology closer to practice, the physical strength and lifetime of QQ media should be improved. In this study, enforcement of physical strength, as well as an extension of the lifetime of a previously reported QQ bacteria entrapping hollow cylinder (QQ-HC), was sought by adding a dehydration procedure following the cross-linking of the polymeric hydrogel by inorganic compounds like $Ca^{2+}$ and boric acid. Such prepared medium demonstrated enhanced physical strength possibly through an increased degree of physical cross-linking. As a result, a longer lifetime of QQ-HCs was confirmed, which led to improved biofouling mitigation performance of QQ-HC in an MBR. Furthermore, QQ-HCs stored under dehydrated condition showed higher QQ activity when the storage time lasted more than 90 days owing to enhanced cell viability. In addition, the dormant QQ activity after the dehydration step could be easily restored through reactivation with real wastewater, and the reduced weight of the dehydrated media is expected to make handling and transportation of QQ media highly convenient and economical in practice.

• 한국의류학회지
• /
• 제47권4호
• /
• pp.646-665
• /
• 2023

This study attempted to examine the characteristics of fashion cross-border e-commerce(CBEC) by analyzing about 35.7 million cases of customs clearance data received from the Korea Customs Service. The demographic characteristics of consumers and the features of products purchased from 2019 to 2021 were explored. Next, the association rules between products, brands, and websites were analyzed by men and women in their 20s to 50s. The results are as follows. First, women purchased more clothing products than men, and overall, consumers tended to purchase products at low prices every year. Second, the most commonly purchased products were T-shirts, bags, and other shoes. In the list clearance, the purchase frequency of international open markets increased for three years; in general clearance, the proportion of luxury brands was high every year. Finally, in the list clearance, the relationships between bags, other shoes, pants, and overseas open markets were significant, while the relationships between wallets, bags, and luxury brands were significant in general clearance. Based on this study, domestic companies participating in or competing against the CBEC market can develop appropriate strategies for merchandising and sourcing clothing products.

• 유통과학연구
• /
• 제3권2호
• /
• pp.121-142
• /
• 2005

We're living in a world of one global village. The globalization of business is acceleration as more companies cross national borders to find customers, materials and money. Many foreign companies and organizations are doing their business aggressively in Korea and many Korean companies and rushing into foreign market. When people communicate for business with someone from another culture, there could be difficult communication barriers to overcome resulting from differences in their values, beliefs, norms for behavior, expectations, attitudes and so on. To do successfully business, we need to understand culture background and communication style that is different from nation, race, language. Communication barriers stemming from cultural differences may vary. Largely, they can be divided into value system, non-verbal communication, and perception process. Value system can be divided into individualism versus group orientation, avoidance of uncertainty degree, power distance, and high- context culture versus low-context culture. Also non-verbal communication method and perception process may play decisive roles in communication effectiveness. Especially nonverbal communication barriers which sometimes play more important roles than the verbal parts are composed of eye contact, gesture, kinesics, proxemics, chronemics, paralanguage and language of color Cross-cultural communication affect business situation. I expect that if we understand cultural background, and then we overcome cross-cultural communication barriers. To overcome and to adapt inter-cultural business, we need to develope curriculum on the cross-cultural education which I will study in the next paper.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.55-58
• /
• 2008

Hydroforming is a forming technology in which a steel tube is set in a die and formed to fit a specified shape by applying hydraulic pressure from inside the tube while also applying force in the tube axial direction (axial feed). In present study, the entire design process chain for an automotive cross-member was simulated and developed using hydroforming technology on high-strength steel. The part design stage required a feasibility study. The process was designed using computer-aided design techniques to confirm the actual hydroformability of the part in detail. The possibility of using hydroformable cross-member parts was examined using cross-sectional analyses, which were essential to ensure the formability of the tube material for each forming step, including pre-bending and hydroforming. The die design stage included all the components of a prototyping tool. Press interference was investigated in terms of geometry and thinning.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1683-1689
• /
• 2014

In this paper, we propose an image processing based time-frequency domain reflectometry(TFDR) in order to estimate the fault location of a cable. The Wigner-Ville distribution is used for analysis in both the time domain and the frequency domain when the conventional TFDR estimates the fault location in a cable. However, the Winger-Ville distribution is a bi-linear function, and hence the cross-term is occurred. The conventional TFDR cannot estimate the accurate fault location due to the cross-term in case the fault location is close to the position where the reference signal is applied to the cable. The proposed method can reduce the cross-term effectively using binarization and morphological image processing, and can estimate the fault location more accurately using the template matching based cross correlation compared to the conventional TFDR. To prove the performance of the proposed method, the actual experiments are carried out in some cases.