• 해양환경안전학회지
• /
• 제19권6호
• /
• pp.561-569
• /
• 2013

본 연구에서는 우리나라 연안의 2003~2009년 해수면자료로 조위편차를 산출하고, 일평균조위편차의 시공간적 변동을 EOF 분석, 해면기압과 바람이 조위편차 변동에 얼마나 영향을 미치는지를 상관성 분석을 통해 알아보았다. 일평균조위편차는 전체 변동량의 68 %(제1모드)가 동시승강하였고, 전체 변동량의 21 %(제2모드)는 서해안이 상승할 때 남해안과 동해안이 하강하는 교차승강을 하였다. 해역별로 조위편차에 영향을 주는 주요 요인을 보면, 서해안은 남-북 방향의 바람 성분이었고, 남해안은 동해안으로 갈수록 해면기압의 영향이 우세하였다.

• 한국응용곤충학회지
• /
• 제40권2호
• /
• pp.125-129
• /
• 2001

날개가 없는 몇몇 절지동물들은 공중이동을 하기 위한 수단으로써 이륙행동 보이는 종들이 있다. 본고는 포식성 이리응애류중에서 이륙행동을 보이는 종(Neoseiulus fallacis (Carman)) 과 이륙행동은 보이지 않으나, 공중이동률이 높은 종(Phytoseiulus persimilis Athias-Henriot),이륙행동이 없고 공중이동률이 중간치인 종(N. ca1ifornicus(McGregor))간에 공기역학적 측면에서 어떠한 메커니즘이 작용하는 지에 관한 연구이다. 위 종들의 도보이동 자세와 공주 이동 이륙행동 자세의 몸체의 수직적 위치, 몸체의 크기, 다리의 길이 등의 자료를 가지고 공기역학적 파라미터를 계산한 결과, P. persimilis는 도보이동 자세에서도 N. fallacis가 이륙행동을 보여야만 얻을 수 있는 양의 항력을 얻을 수 있음이 밝혀졌다. 이러한 관점에서 포식성 이리응애류의 이륙행동 진화에 대한 고찰하였다.

• 한국지반공학회논문집
• /
• 제28권5호
• /
• pp.109-120
• /
• 2012

해저 지반조사에서는 시추공 조사가 제한되고, 비교적 간편한 방법으로 결과물을 얻어 낼 수 있는 물리탐사를 주로 사용하고 있으며, 이러한 해저 지반조사의 한계를 극복하기 위해서 가용할 수 있는 다양한 종류의 지반조사 자료를 수집하고 서로 상반되는 장 단점을 상호 보완하여 이용해야 한다. 이에 본 연구에서는 해상기초 설계를 위해 해상에서 수행되는 다수의 탄성파탐사 자료와 기초 설치 지점에 집중되어 측선 주변에서 수행되는 시추조사 자료를 중첩하여 수치화된 2차원 대표 층상단면을 결정하고, 공간보간 기법(kriging)을 통해 3차원 층상정보를 결정할 수 있는 통합 분석 기법을 수립하였다. 또한 2차원 대표 층상단면 결정 시 물리탐사 결과의 공간적 변동성과 측선과 시추조사 지점과의 이격거리를 고려한 중첩방법을 추가로 제안하였다. 최종적으로 통합분석 기법을 제주도 해상풍력 발전 시범지역에 적용하였으며, 제안 기법의 적용성을 교차검증을 통해 검증하였다.

• 한국지구과학회지
• /
• 제26권7호
• /
• pp.706-713
• /
• 2005

엘니뇨현상과 관련된 해양 아표층 변동성을 조사하기 위해 1980년부터 2004년까지의 적도 해역의 20도 등온선 깊이(Z20)와 난수질량(WWV) 자료를 분석하였다. 주성분 분석, 합성 분석 및 교차상관 분석 결과, 아표층 시계열 자료는 Nino3.4 SST와 유의미한 시간 지연을 가지고 강한 상관성을 보였다. 이 결과는 아표층 해양 변수가 엘니뇨현상에 유용한 예측 인자임을 시사한다. 분석된 결과를 근거로 1996년부터 2004년까지 Nino3.4 SST를 예측하기 위해 신경망 예측 모델을 구성하였다. 해상풍을 입력 자료로 사용하였을 경우 보다 WWV를 적용하였을 때 3개월 이하의 단기 예측을 제외하고 모든 예측 시간에서 더 우수한 예측력을 보였으며, 5-8개월의 예측에 있어서는 기존의 여러 통계 모델 결과보다 예측 성능이 우수함을 확인하였다.

• Wind and Structures
• /
• 제6권5호
• /
• pp.387-402
• /
• 2003

In the past decades, much effort has been made towards the study of single-mode-based vibration controls with dynamic energy absorbers such as single or multiple Tuned Mass Dampers(TMDs). With the increase of bridge span length and the tendency of the bridge cross-section being more slender and streamlined, multi-mode coupled vibrations as well as their controls have become very important for large bridges susceptible to strong winds. As a simple but effective device, the TMD system especially the semi-active one has become a promising option for such coupled vibration controls. However, despite various studies of optimal controls of single-mode-based vibrations with TMDs, research on the corresponding controls of the multi-mode coupled vibrations is very rare so far. For the development of a semi-active control strategy to suppress the multi-mode coupled vibrations, a comprehensive parametric analysis on the optimal variables of this control is substantial. In the present study, a multi-mode control strategy named "three-row" TMD system is discussed and the general numerical equations are developed at first. Then a parametric study on the optimal control variables for the "three-row" TMD system is conducted for a prototype Humen Suspension Bridge, through which some useful information and a better understanding of the optimal control variables to suppress the coupled vibrations are obtained. This information lays a foundation for the design of semi-active control.

• Wind and Structures
• /
• 제23권2호
• /
• pp.157-169
• /
• 2016

The structural integrity of tube bundles represents a major concern when dealing with high risk industries, such as nuclear steam generators, where the rupture of a tube or tubes will lead to the undesired mixing of the primary and secondary fluids. Flow-induced vibration is one of the major concerns that could compromise the structural integrity. The vibration is caused by fluid flow excitation. While there are several excitation mechanisms that could contribute to these vibrations, fluidelastic instability is generally regarded as the most severe. When this mechanism prevails, it could cause serious damage to tube arrays in a very short period of time. The tubes are therefore stiffened by means of supports to avoid these vibrations. To accommodate the thermal expansion of the tube, as well as to facilitate the installation of these tube bundles, clearances are allowed between the tubes and their supports. Progressive tube wear and chemical cleaning gradually increases the clearances between the tubes and their supports, which can lead to more frequent and severe tube/support impact and rubbing. These increased impacts can lead to tube damage due to fatigue and/or wear at the support locations. This paper presents simulations of a loosely supported multi-span U-bend tube subjected to turbulence and fluidelastic instability forces. The mathematical model for the loosely-supported tubes and the fluidelastic instability model is presented. The model is then utilized to simulate the nonlinear response of a U-bend tube with flat bar supports subjected to cross-flow. The effect of the support clearance as well as the support offset are investigated. Special attention is given to the tube/support interaction parameters that affect wear, such as impact and normal work rate.

• Wind and Structures
• /
• 제23권2호
• /
• pp.127-142
• /
• 2016

Aerodynamic effects, such as drag force and flow-induced vibration (FIV), on civil engineering structures can be minimized by optimally modifying the structure shape. This work investigates the turbulent wake of a square prism with its faces modified into a sinusoidal wave along the spanwise direction using three-dimensional large eddy simulation (LES) and particle image velocimetry (PIV) techniques at Reynolds number $Re_{Dm}$ = 16,500-22,000, based on the nominal width ($D_m$) of the prism and free-stream velocity ($U_{\infty}$). Two arrangements are considered: (i) the top and bottom faces of the prism are shaped into the sinusoidal waves (termed as WSP-A), and (ii) the front and rear faces are modified into the sinusoidal waves (WSP-B). The sinusoidal waves have a wavelength of $6D_m$ and an amplitude of $0.15D_m$. It has been found that the wavy faces lead to more three-dimensional free shear layers in the near wake than the flat faces (smooth square prism). As a result, the roll-up of shear layers is postponed. Furthermore, the near-wake vortical structures exhibit dominant periodic variations along the spanwise direction; the minimum (i.e., saddle) and maximum (i.e., node) cross-sections of the modified prisms have narrow and wide wakes, respectively. The wake recirculation bubble of the modified prism is wider and longer, compared with its smooth counterpart, thus resulting in a significant drag reduction and fluctuating lift suppression (up to 8.7% and 78.2%, respectively, for the case of WSP-A). Multiple dominant frequencies of vortex shedding, which are distinct from that of the smooth prism, are detected in the near wake of the wavy prisms. The present study may shed light on the understanding of the underlying physical mechanisms of FIV control, in terms of passive modification of the bluff-body shape.

• 한국전산구조공학회논문집
• /
• 제30권1호
• /
• pp.31-37
• /
• 2017

본 논문에서는 이종재질로 구성된 세장비가 큰 보의 차원축소와 복원의 효율성과 정확성을 입증하기 위하여 VABS와 3차원 유한요소해석 모델의 결과와 비교하였다. 그리고 3차원 유한요소모델과 차원축소 모델을 가상균열닫힘법을 이용하여 에너지 해방률을 계산하였다. 원형과 사각형의 단면에 초기 크랙을 가진 수치모델을 이용하여 보의 차원축소와 복원기법 및 가상균열닫힘법을 이용하여 복원해석 결과 및 에너지 해방률을 비교하여 효율성과 정확성을 입증하였다. 특히 제시된 에너지 해방률 계산 기법은 고고도 무인기의 날개, 헬리콥터 로터 블레이드, 풍력 블레이드, 틸트로터 등의 정적, 동적 모델링 및 수명평가에 활용될 수 있을 것이다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_4호
• /
• pp.197-206
• /
• 2001

The long-range transport mechanisms of Asian dust were analyzed based on the synoptic weather system and numerical simulation by using NCEP/NCAR reanalysis and TOMS data during the periods of 1996-2001. We classified the whole weather types of eastern Asia during spring and created the representative weather types during the yellow sand events using cluster analysis and weather charts for the last 6 years(1996~2001). These long-range transport mechanisms were related to various pressure patterns including high and low, trough and ridge, and upper-level fronts. Case studies of the yellow sand events have performed by the simulation of MM5 with meteorological elements such as the horizontal wind of u and v component, potential temperature, potential vorticity, and vertical circulation during the episodic days(2~8 March 2001). In addition, the origin of the long-range transport was examined with the estimation of backward trajectory using HYSPLIT4 Model. In this paper, we concluded that three weather types at 1000 hPa, 850 hPa, 500 hPa, and 300 hPa levels were classified respectively. The dominant features were the extending continental outflow from China to Korea at 1000 hPa and 850 hPa levels, the deep trough passage and cold advection at 500 hPa and 300 hPa levels during the yellow sand events. And also, we confirmed the existence of pola $r_tropical jets in the upper-level, the behavior of potential vorticity over Korea, the estimation of potential vorticity through vertical cross section, and the transport of yellow sand through backward trajectories.es.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.25-29
• /
• 2005

Axial fan is used for the supplement of large amount of flows. Axial blowers show relatively high efficiency of the system. The present model of axial fan is for cooling a condenser in an air-conditioning unit that exhibits tendency toward compact size. In order to realize the compact model, the width of an axial blade should be cut down in axial distance. Main interest lies on the performance of the axial blowing system with blades having shorter chord length. One of the important design parameters for axial fan is the shape of the blades of it. Design of blades includes the cross-sectional shape and its dimension, including the chord length. We consider two types of blades; one is NACA airfoil with normal chord length and the other is with shortening chord length by $10\%$ of normal airfoil. Axial blower with the modified blades is essential for the compact model of an air-conditioner. The other design parameters are same in the two cases. Using a wind tunnel follows ASHRAE standards carries out evaluation of performance of the system. Detail of flows around the blades is prepared by velocity measurements using PIV. According to performance estimation, the axial blower with short chord blade show quite close to the performance results, including flow rate and pressure rise, of the standard one. The reason of the two similar results is that the flowpatterns depend on Reynolds number based on the chord length of a blade. In this investigation, the critical chord length is found, in which the flows near the airfoil are so unstable and the performance of the system is decreased. A series of figures is for the detail information on the flow.