• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.567-573
• /
• 2008

Water quality in the longitudinal and cross section was measured and analyzed at Dal stream. The change of water quality was compared with the change of discharge at the important points. When discharge was increased by rainfall, the concentration of BOD was decreased and the concentrations of TN and TP were increased. The correlation coefficient of BOD, TN, TP showed large with the water velocity and depth in the Case 2 that discharge was increased. Rainfall had much influenced in water quality because of moving the nonpoint source to the channel. Water velocity was analyzed by numerical model(Surface water Modeling System). Velocity was comparatively fast in the upstream that had a steep slope and narrow channel. The characteristics of pollution transfer was simulated in 2-dimensional channel, the pollution diffused rapidly to the center of flow in the main channel. Flow had much influenced in diffusion of pollution.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.4
• /
• pp.203-212
• /
• 2002

This study was conducted to remove the urban heat island effects embedded in the interpolated surfaces of daily minimum temperature in the Korean Peninsula. Fifty six standard weather stations are usually used to generate the gridded temperature surface in South Korea. Since most of the weather stations are located in heavily populated and urbanized areas, the observed minimum temperature data are contaminated with the so-called urban heat island effect. Without an appropriate correction, temperature estimates over rural area or forests might deviate significantly from the actual values. We simulated the spatial pattern of population distribution within any single population reporting district (city or country) by allocating the reported population to the "urban" pixels of a land cover map with a 30 by 30 m spacing. By using this "digital population model" (DPM), we can simulate the horizontal diffusion of urban effect, which is not possible with the spatially discontinuous nature of the population statistics fer each city or county. The temperature estimation error from the existing interpolation scheme, which considers both the distance and the altitude effects, was regressed to the DPMs smoothed at 5 different scales, i.e., the radial extent of 0.5, 1.5, 2.5, 3.5 and 5.0 km. Optimum regression models were used in conjunction with the distance-altitude interpolation to predict monthly normals of daily minimum temperature in South Korea far 1971-2000 period. Cross validation showed around 50% reduction in terms of RMSE and MAE over all months compared with those by the conventional method.conventional method.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.6
• /
• pp.96-103
• /
• 1996

This paper describes the electron transport characteristics in SF6 gas calculated for range of E/N values from 150~ 800[Td) by the Monte Carlo simulation and Boltzmann equation method using a set of electron collision cross sections detennined by the authors and the values of electron swarm parameters are obtained by TOF method. The results gRined that the values of the electron swarm parameters such as the electron drift velocity, the electron ionization or Rttachment coefficients, longitudinal and transverse diffusion coefficients agree with the experimental and theoretical for a range of E/N. The properties of electron avalanches is concerned electron energy non--equilibrium region. The electron energy distributions function were analysed in sulphur hexafluoride at E/N : 500~800[Td) for a case of non-equilibrium region in the mean electron energy. The validity of the results obtained has been confilll1ed by a TOF method.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.5
• /
• pp.369-373
• /
• 2005

The objectives of the current work is to understand the factors impacting the formulation and performance of a Carbopol mucoadhesive buccal delvery system for a model peptide drug, $[D-Ala{^2},\;D-Leu{^5}]$enkephalin (DADLE, Mw=569.7) with comparable chemical and enzymatic stability. Specifically, in vitro buccal DADLE delivery from the cross-linked poly(acrylic acid) (PAA) hydrogel system was characterized. In addition, the influences of several penetration enhancers on the ex vivo buccal absorption of DADLE were also studied. In this study, the PAA hydrogels generally swell to 100% of their original weight in the phosphate pH 7.4 buffer. The water penetration into the PAA hydrogel occurred based on a zero-order kinetics for the first 60 min and steadily decreased afterwards. From the release study, it can be seen that the initial DADLE release was so rapid and the rate of release of DADLE decreased as the time elapsed. The porcine buccal tissue was found to be permeable to DADLE with a flux value of $0.07%/cm{^2}/hr({\pm}0.01\;SD)$. From the ex vivo diffusion study, it was found that sodium taurodihydrofusidate showed a greater degree of enhancement compared to the phospholipids with an Enhancement Ratio (ER) of 8.7 compared to 2.7 and 1.9 for didecanoylphosphatidylcholine and lysophosphatidylcholine, respectively. The work encompassed within this paper has demonstrated the feasibility of using the PAA hydrogel delivery system with its good mucoadhesive properties for the buccal delivery of peptides.

• Journal of Biomedical Engineering Research
• /
• v.33 no.4
• /
• pp.169-176
• /
• 2012

Tumor cell morphology is closely related to its migratory behaviors. An active tumor cell has a highly irregular shape, whereas a spherical cell is inactive. Thus, quantitative analysis of cell features is crucial to determine tumor malignancy or to test the efficacy of anticancer treatment. We use 3D time-lapse phase-contrast microscopy to analyze single cell morphology because it enables to observe long-term activity of living cells without photobleaching and phototoxicity, which is common in other fluorescence-labeled microscopy. Despite this advantage, there are image-level drawbacks to phase-contrast microscopy, such as local light effect and contrast interference ring. Therefore, we first corrected for non-uniform illumination artifacts and then we use intensity distribution information to detect cell boundary. In phase contrast microscopy image, cell is normally appeared as dark region surrounded by bright halo ring. Due to halo artifact is minimal around the cell body and has non-symmetric diffusion pattern, we calculate cross sectional plane which intersects center of each cell and orthogonal to first principal axis. Then, we extract dark cell region by analyzing intensity profile curve considering local bright peak as halo area. Finally, we calculated the Fourier descriptor that morphological characteristics of cell to classify tumor cells into active and inactive groups. We validated classification accuracy by comparing our findings with manually obtained results.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.162-166
• /
• 2000

High quality $Si_3N_4$ metal-insulator-metal (MIM) capacitors were realized by plasma enhanced chemical vapor deposition (PECVD). Titanium nitride (TiN) adapted as a diffusion barrier reduced the interfacial reaction between $Si_3N_4$ dielectric layer and aluminum metal electrode showing neither hillock nor observable precipitate along the interface. The capacitance and the current-voltage characteristics of the MIM capacitors showed that the minimum thickness of $Si_3N_4$ layer should be limited to 500 $\AA$ under the present process, below which most of the capacitors were electrically shorted resulting in the devastation of on-wafer yield. According to the transmission electron microscopy (TEM) on the cross-sectional microstructure of the capacitors, the dielectric breakdown was caused by slit-like voids formed at the interface between TiN and $Si_3N_4$ layers when the thickness of $Si_3N_4$ layer was less than 500 $\AA$. Based on the calculation of thermally-induced residual stress, the formation of voids was understood from the mechanistic point of view.

• Membrane Journal
• /
• v.15 no.2
• /
• pp.105-113
• /
• 2005

Silica membranes were prepared on a porous metal sheet by ultrasonic spray pyrolysis method for gas separation at high temperatures. In order to improve the permselectivity, silica was deposited in the sol-gel derived $silica/\gamma-alumina$ intermediate layer by pyrolysis of tetraethyl orthosilicate (TEOS) at 873 K. The pyrolysis with forced cross flow through the porous wall of the support was very effective in plugging mesopores, Knudsen diffusion regime, that were left unplugged in the membranes. At permeation temperature of 523 K, the silica/alumina composite membrane showed $H_2/N_2$ and water/methanol selectivity as high as 17 and 16, respectively, by molecular sieve effect.

• Journal of Aquaculture
• /
• v.11 no.2
• /
• pp.271-278
• /
• 1998

To clarify characteristics of yolk protein of abalone, yolk protein was purified from the ovarian egg extracts of mature female Haliotis discus hannai by a gel chromatography of sepharose CL-4B. From the results of immuno-electrophoresis and Ouchterlony's diffusion test to male and female sera and ovarian egg extracts using antibodies raised against mature female and male sera and male sera and ovarian egg extrascts, it was identified that the mature female serum had female specific serum protein and its antigenecity shared with ovarian egg extracts. A single type of yolk protein was purified from ovarian egg extracts, and it was composed of two subunits. Their molecular weights were estimated to be approximately 166 KDa and 113 KDa by SDSPAGE. The antiserum against yolk proteins cross-reacted with a mature female specific serum protein and extracts of hepatopancreas of vitellogeing females, but did not reacted with extracts of hepatopancreas of mature male.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1429-1436
• /
• 1994

We have prepared Ba0.5Sr0.5TiO3 thin films on Si substrate without buffer layer. Deposition was carried out by off-axis rf magnetron sputtering method using Ba0.5Sr0.5TiO3 stoichiometric target. The substrate temperature was changed from 40$0^{\circ}C$ to $700^{\circ}C$ during deposition. As the substrate temperature increased, relative intensity of (110) peak increased up to $600^{\circ}C$, however preferred orientation changed from (110) to (h00) beyond $650^{\circ}C$ of substrate temperature. Deposited films showed microstructures with fine grains whose diameters are less than 100 nm, and columnar structure was observed in the cross-sectional SEM micrograph. AES depth profile showed no significant diffusion at the interfacial reaction area. The effective dielectric constant of films showed maximum value at $600^{\circ}C$, and the leakage current increased with increasing substrate temperature, which may be ascribed to the crystallization of amorphous phases at grain boundary.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.395-402
• /
• 1985

The apparent activation energy Q$_{c}$ and the applied stress exponent n have been determined during creep of Al 7075 alloy over the temperature range of 90.deg. C to 320.deg. C (0.4-0.65T$_{m}$) and stress range of 1.85 kgf/mm$^{2}$ to 21 kgf/mm$^{2}$, respectively in order to investigate the creep behavior. Constant load creep tests were carried out in the experiment. At round the temperature of 200.deg. C-240.deg. C and under the stress level 8.13-9.55kgf/mm$^{2}$ and again at around the temperature of 280.deg. C-320.deg. C and under the stress level of 1.85-2.55kgf/mm$^{2}$, the creep behavior obeyed for the creep deformation was nearly equal to that of the volume self diffusion of pure aluminum (34kcal/mole). But at around the temperature of 90.deg. C and under the stress level of 10-21kgf/mm$^{2}$, the creep behavior did not obey a simple power-law relation and the apparent activation enrgy, Q$_{c}$ was 26.01 kcal/mole. From the above facts, at around the temperature of 200.deg. C-240.deg. C and 280.deg. C-320.deg. C, the creep deformation for Al 7075 alloy seemed to be controlled by dislocation climb but at 90.deg. C, by cross slip over the range of experimental stress conditions.tions.