• The korean journal of orthodontics
• /
• v.46 no.6
• /
• pp.345-355
• /
• 2016

Objective: The purpose of this study was to determine whether predicting maturation of the midpalatal suture is possible by classifying its morphology on cone-beam computed tomography (CBCT) images and to investigate relationships with other developmental age indices. Methods: The morphology of the midpalatal suture was assessed by using CBCT images of 99 patients. Axial plane images of the midpalatal suture were classified into five stages according to the classification scheme. To make the assessment more accurate, the morphology and fusion of the midpalatal suture were additionally investigated on coronal cross-sectional planar images and volume-rendered images. Bone age was evaluated using the hand and wrist method (HWM) and cervical vertebrae method (CVM); dental age (Hellman's index), sex, and chronological age were also assessed. To evaluate relationships among variables, Spearman's rho rank test was performed along with crosstabs using contingency coefficients. Results: The HWM and CVM showed strong correlations with the maturation stage of the midpalatal suture, while other indices showed relatively weak correlations (p < 0.01). Through crosstabs, the HWM and CVM showed high association values with CBCT stage; the HWM demonstrated slightly higher values (p < 0.0001). Based on the HWM, the midpalatal suture was not fused until stage 6 in both sexes. Conclusions: Among developmental age indices, the HWM and CVM showed strong correlations and high associations, suggesting that they can be useful in assessing maturation of the midpalatal suture.

• Journal of Periodontal and Implant Science
• /
• v.48 no.2
• /
• pp.124-134
• /
• 2018

Purpose: Clinicians must examine tooth wear to make a proper diagnosis. However, qualitative methosds of measuring tooth wear have many disadvantages. Therefore, this study aimed to develop and evaluate quantitative parameters using the cusp area and volume of virtual dental models. Methods: The subjects of this study were the same virtual models that were used in our former study. The same age group classification and new tooth wear index (NTWI) scoring system were also reused. A virtual occlusal plane was generated with the highest cusp points and lowered vertically from 0.2 to 0.8 mm to create offset planes. The area and volume of each cusp was then measured and added together. In addition to the former analysis, the differential features of each cusp were analyzed. Results: The scores of the new parameters differentiated the age and NTWI groups better than those analyzed in the former study. The Spearman ${\rho}$ coefficients between the total area and the area of each cusp also showed higher scores at the levels of 0.6 mm (0.6A) and 0.8A. The mesiolingual cusp (MLC) showed a statistically significant difference (P<0.01) from the other cusps in the paired t-test. Additionally, the MLC exhibited the highest percentage of change at 0.6A in some age and NTWI groups. Regarding the age groups, the MLC showed the highest score in groups 1 and 2. For the NTWI groups, the MLC was not significantly different in groups 3 and 4. These results support the proposal that the lingual cusp exhibits rapid wear because it serves as a functional cusp. Conclusions: Although this study has limitations due to its cross-sectional nature, it suggests better quantitative parameters and analytical tools for the characteristics of cusp wear.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.21 no.4
• /
• pp.518-527
• /
• 2015

Purpose: This study aimed to identify a relationship between the communication competence and social anxiety in nursing students. Methods: With a cross-sectional survey, a convenience sampling of 303 nursing students was taken from P-university in Y-city. The instrument for the study was a questionnaire that is consisted of the general characteristics, an Interaction Anxiousness Scale (IAS) and a Global Interpersonal Communication Competence Scale (GICC). Data was analyzed using descriptive statistics, t-test, one-way ANOVA, Kruskal-Wallis, Pearson's correlation coefficients and stepwise multiple regression with SPSS version 21.0. Results: The mean score of the IAS was $41.89{\pm}8.74$ and the GICC was $3.51{\pm}0.34$. Communication competence significantly differed by the satisfaction of major (F=10.86, p<.001). In addition, the satisfaction of interpersonal relationships was significantly different in both communication competence (F=17.52, p<.001) and social anxiety (F=23.85, p<.001). Social anxiety had a negative correlation with communication competence (r=-.48, p<.001). Social anxiety accounted for 55.3% of the variance -social relaxation (${\beta}$=-.62), assertiveness (${\beta}$=-.18), interaction management (${\beta}$=.14) and efficiency (${\beta}$=-.13)- of communication competence's subcategories. Conclusion: It was found that communication competence has an influence on social anxiety. Therefore, education programs are needed to promote communication competence for a decline of social anxiety in nursing students.

• Research in Community and Public Health Nursing
• /
• v.31 no.3
• /
• pp.300-309
• /
• 2020

Purpose: This study was conducted to investigate the factors affecting the discrimination of the elderly using welfare centers. Methods: A cross-sectional study was conducted with 217 elderly people from a welfare center in D city. Data were collected using a self-administered questionnaire survey consisting of ageism experience, social participation attitude, social support, and empowerment. For data analysis, descriptive statistics, t-test, one-way ANOVA, Pearson correlation coefficients, and multiple regression were performed using SPSS/WIN 21.0 program. Results: As a result of analyzing the correlations among the variables, the discrimination experience of the elderly showed negative correlations in social participation attitude and child relationship support. The factors affecting the discrimination experience of the elderly include gender, job, smartphone use, and child relationship support had a significant effect. The explanatory power of the discrimination experience of these factors was 15.4%. Conclusion: This study found that gender, job, social support, and smartphone use were factors influencing the discrimination experience of the elderly. It is hoped that public relations and policy measures should be considered.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.325-333
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics inside the cooling passage of the gas-turbine blades. It is important to increase not only the heat transfer rates but also the uniformity of heat transfer in the cooling passage. The square duct has compound-angled ribs with $60^{\circ},\;70^{\circ}$ and $90^{\circ}$ attack angles, which are installed on the test plate surfaces. a naphthalene sublimation technique is employed to determine the detailed local heat transfer coefficients using the heat and mass transfer analogy. The ribs disturb the main flow resulting in the recirculation and secondary flows near the ribbed wall and the vertices near the side-wall. The local heat transfer and the secondary flow in the duct are changed largely according to the rib orientation. Therefore, geometry and arrangement of the ribs are important fur the advantageous cooling performance. The angled ribs increase the heat transfer discrepancy between the wall and center regions because of the interaction of the secondary flows. The average heat/mass transfer coefficient and pressure drop of the ribs with the $60^{\circ}$ $-90^{\circ}$ compound-angle are higher than those with the $60^{\circ}$ attack angle. Also, the thermal efficiency of the compound-angled rib is higher than that with the $60^{\circ}$ attack angle. The uniformity of heat/mass transfer coefficient on the cross ribs may is higher than that on the parallel ribs array.

• Journal of Korean Critical Care Nursing
• /
• v.13 no.1
• /
• pp.15-26
• /
• 2020

Purpose : This study aimed to examine factors affecting radiation protective behaviors among emergency room nurses by assessing knowledge, attitude, and environment for radiation protection. Methods : The study employed a cross-sectional design. Subjects were a convenience sample of 129 nurses working in emergency rooms of three general hospitals. Data were collected using self-report questionnaires and analyzed using t-test, ANOVA, Pearson correlation coefficients, and multiple regression. Results : The more the nurses received radiation safety education (t=2.26, p=.026), used protective gear (t=4.40, p<.001), and took health screenings (t=2.65, p=.009), the higher their levels of radiation protection behavior. There were significant relations between radiation protective behaviors and attitude (r=.27, p=.002), and radiation protective behaviors and environment for radiation protection (r=.55, p<.001). The factors affecting radiation protective behaviors were protective environment (β=.53, p<.001), protective attitude (β=.32, p<.001), and the use of protective gear (β=.24, p=.002). Conclusions : The government, hospital administrators, and radiation protection-related organization should adopt the following measures to protect emergency room nurses from radiation: research and development of shield instrument, medical examination for emergency room nurses, protocol development of radiation protection behaviors, extension of education chances of radiation protection, and encouraging the use of protective equipment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.432-439
• /
• 2003

Inconel 690 for nuclear steam generator tube has more Chromium than the conventionally used Inconel 600 in order to increase the corrosion resistance. To evaluate the tribological characteristics of Inconel 690 under fretting condition the fretting tests were carried out in air and elevated temperature water. Fretting tests of the cross-cylinder type were done under various vibrating amplitudes and applied normal loads in order to measure the friction forces and wear volumes. From the results of fretting wear tests. the wear of Inconel 690 can be predictable using the work rate model. The amounts of friction forces were proportional to relative movement between two fretting surfaces. The friction coefficients were decreased as increasing the normal loads and deceasing the vibrating amplitudes. Depending on fretting environment, distinctively different wear mechanisms and often drastically different wear rates can occur It was found that the fretting wearfactors in air and water at 2$0^{\circ}C$, 5$0^{\circ}C$, and 8$0^{\circ}C$ were 7.38 $\times$ $10^{-13}$$Pa^{-1}$, 2.12 $\times$$10^{-13}$$Pa^{-1}$, 3.34$\times$$10^{-13}$$Pa^{-1}$and 5.21$\times$$10^{-13}$$Pa^{-1}$, respectively flexibility to model response data with multiple local extreme. In this study, metamodeling techniques are adopted to carry out the shape optimization of a funnel of Cathode Ray Tube, which finds the shape minimizing the local maximum principal stress. Optimum designs using two metamodels are compared and proper metamodel is recommended based on this research.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.82-93
• /
• 2008

The flowfield behind two cylinders and flow-induced noise generated from the cylinders in various arrangement are numerically investigated based on the finite difference lattice Boltzmann model with 21 velocity bits. which is introduced a flexible specific heat ${\gamma}$ to simulate diatomic gases like air. In an isolated cylinder with two type of mesh. some flow parameters such as Strouhal number $S_t$ and acoustic pressure ${\Delta}p$ simulated from the solution are given and quantitatively compared with those provided the previous works. The effects of the center-to-center pitch ratio $L_{cc}/d=2.0$ in staggered circular cylinders as shown in Fig. 1 and angles of incidence ${\alpha}=30^{\circ}(T_{cc}/d=0.5)$, $45^{\circ}(T_{cc}/d =0.707)$ and $60^{\circ}\;(T_{cc}/d=0.866)$, respectively, are studied. Our analysis focuses on the small-scale instabilities of vortex shedding, which occurs in staggered arrangement. With the results of drag $C_d$ and lift $C_l$ coefficients and vorticity contours. the mechanisms of the interference phenomenon and its interaction with the two-dimensional vortical structures are present in the flowfields under $Re\;{\le}\;200$. The results show that we successively capture very small pressure fluctuations, with the same frequency of vortex shedding, much smaller than the whole pressure fluctuation around pairs of circular cylinders. The upstream cylinder behaves like an isolated single cylinder, while the downstream one experiences wake-induced flutter. It is expected that, therefore, the relative position of the downstream cylinder has significant effects on the flow-induce noise, hydrodynamic force and vortex shedding characteristics of the cylinders.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.110-120
• /
• 1986

45.deg. corss jet flow, at the mixing of two jet flows, was experimentally studied. For this study, only the statistical turbulent characteristics and high order moments will be analysed by on-line computer system (hot-wire anemometer system, dynamic analyser and computer system, plotting and printing system). Since mean velocity distributions, intensities of turbulence, Reynolds stresses, correlation coefficients, and other general results were already studied and presented. One dimensional probability density distributions of u', v', and w' were analysed comparing with Gaussian curve, which showed skew and flat tendency according to the Y and Z directions. For the analysis of the joint flow of turublent components, the joint probability density distributions were examined. The fagures were drawn so as to be read joint probabilities, joint probability densities, fluctuating velocities u', v', and w'. For further detailed examination of the variations of skewness and flatness phenomena, iso-joint probability density contours obtained from the profiles of the joint probability density distributions were studied. According to the displacement of positions from the center of the mixing flow and the directions, the flatness and skewness factors were increased.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3991-3995
• /
• 2015

Background: Colorectal cancer (CRC) is the third most common cancer in Iranian women and fifth in men. The aims of this study were to investigate the relation of dietary factors and public health indicators to its development. Materials and Methods: The required information (2001-2006) about risk factors was obtained from the Non-Communicable Disease Surveillance Centre (NCDSC) of Iran. Risk factor data (RFD) from 89,404 individuals (15-64 years old) were gathered by questionnaire and laboratory examinations through a cross sectional study in all provinces by systematic clustering sampling method. CRC incidence segregated by age and gender was obtained from Cancer Registry Ministry of Health (CRMH) of Iran. First, correlation coefficients were used for data analysis and then multiple regression analysis was performed to control for confounding factors. Results: Colorectal cancer incidence showed a positive relationship with diabetes mellitus, hypertension, lacking or low physical activity, high education, high intake of dairy products, and non-consumption of vegetables and fruits. Conclusions: We concluded that many dietary factors and public health indicators have positive relationships with CRC and might therefore be targets of preliminary prevention. However, since this is an ecological study limited by potential ecological fallacy the results must be interpreted with caution.