• Journal of Korean Society of Forest Science
• /
• v.84 no.3
• /
• pp.333-342
• /
• 1995

A user - oriented computer model to aid designing forest road is developed to release the burden by increasing efficiency of time - consuming and laborious road design works. In this paper, the structures and functions of the model are discussed. The model consists of functional modules : 1)input module to treat survey data and design criteria ; 2)road design module to generate preliminary road layout, horizontal and vertical curvatures and curve widening ; 3)earthwork analysis module to determine the economic mass movement ; 4)report writer module to produce hard copies of engineering drawings for plan views, cross - sections and profiles, earthwork calculation sheets and mass movement diagrams. In addition, the report writer also provides the information on earthwork disturbance along the cut and - fill slopes. The modules are designed to be fully - integrated to enable the users to perform engineering analyses and evaluate design alternatives in a series of road - design procedures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.390-397
• /
• 2019

A mechanical model of band sawing saw frame was established according to an analysis of a commonly used saw-frame structure diagram to overcome the problems of low service life, substandard cutting precision and efficiency, and high manufacturing cost caused by the unreasonable design of saw frame. Taking a particular type of sawing machine as an example, stress cycle analysis of the saw blade was carried out according to the mechanical model of the saw frame, and the fatigue analysis model of the most dangerous cross-section point that was most prone to fatigue failure of the saw blade was then established. The fatigue analysis result was used as the basis for the improved design of the saw frame, and the improved detailed saw-frame design parameters were obtained. The results suggested that the saw frame system is much more compact and the saw blade force met the fatigue strength requirements through the improved design. In addition, the service life of the saw blade and the cutting precision were increased. The established mechanical model of the saw frame in this paper is used widely and has high practical application values.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.403-414
• /
• 2011

This study is re-creational experiment of Goryeo gold-painted decoration based on the research of the gold remaining and gold painting technique on the two pieces of Goryeo gold-painted celadon and the three pieces of Chinese gold-painted porcelain on North Song period which ones have been owned by National Museum of Korea since 2007. For the observation of glue state and color developing ability, four kinds of agglutinative agent and gold powder were mixed over the porcelain sherds, then gradually fired from $100^{\circ}C$ to $1200^{\circ}C$. Visual effect and ideal temperature were measured. Among of them, oil and glue showed the best results in glue state and color developing ability. Through those results, the entire Goryeo engraved celadon were reproduced in modern facilities. Oil and glue were gold-painted over the glaze then it was fired at the ideal temperature 700 to $800^{\circ}C$. For observation the binding condition, the gold-painting cross section was looked by the scanning electron microscope (SEM). As the result, oil and glue did not make much difference in Agglutinative agent, but gold was good, the color developing ability, however, in the case of oil, the edge of gold is curled because of its interfacial tension, and it is not dried well at room temperature so the working property is not as good as the glue. Glue more effective in terms of work efficiency, but color developing ability to fall slightly in this experiment were able to see through.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.315-323
• /
• 2015

Damage level of coastal structures has been scaled up according to increase of wave height and duration of the storm due to the abnormal global climate change. So, the design criteria for new breakwaters is being intensified and structural strengthening is also conducted for the existing breakwaters. Recently, interlocking concept has been much attention to enhance the structural stability of the conventional caisson structure designed individually to resist waves. The interlocking caisson breakwater may be survival even if unusual high wave occurs because the maximum wave force may be reduced by phase lags among the wave forces acting on each caisson. In this study, the dispersion characteristics of wave forces using interlocking system that connect the upper part of caisson with cable in the normal direction of breakwater was investigated. A simplified linear model was developed for computational efficiency, in which the foundation and connection cables were modelled as linear springs, and caisson structures were assumed to be rigid. From numerical experiments, it can be found that the higher wave forces are transmitted through the cable as the angle of incident wave is larger, and the larger the stiffness of the interlocking cable makes larger wave dispersion effect.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.104-108
• /
• 2001

Naphthalene derived mesophase pitch WP) was spun into short fibers by using melt-blown technology. The pitch fibers oxidative stabilization were carried out heating rates of $2^{\circ}C/min,\;5^{\circ}C/min\;and\; 10^{\circ}/min$. The heating rate was a key factor to maximate the capacity of the Li-ion secondary battery through controlling the morphology of the graphitized fiber. The diameters of the melt-blown fibers prepared were in the range of $4{\mu}m\~16{\mu}m$ with functions of air jet speed, air temperature and the temperature of the nozzle. The graphitized fibers of $10{\mu}m$ diameters showed various morphological structure with heating rate of the stabilization. Radial, radial-random and skin-core cross-sectional structure of the fibers were observed at the respective heating rate of $2^{\circ}C/min\;5^{\circ}C/min\;and\;10^{\circ}C/min$. Most crystalline structure of graphite was obtained from the fiber stabilized at heating rate of $10^{\circ}C/min$ exhibiting the best anode performance with 400 mAh/g of capacitance and $96.8\%$ of charge/discharge efficiency.

• Tunnel and Underground Space
• /
• v.15 no.6 s.59
• /
• pp.452-461
• /
• 2005

In a bidirectional tunnel, the accident rate is 1.5 times as high as that of one directional tunnel , the risk of a fire is increased. On fire, there is a problem that the jet fan should not be operated until completion of refuge. To be special, as the great damages occur owing to the expansion of smoke in long tunnels, there is a need to minimize fatality by constructing cross passage and smoke removal system. This study aims at verifying the efficiency of smoke exhaust system through fire propagation simulation as well as scale model test. The results show that completion of escape through emergency exit requires 335 seconds, while addition of smoke exhaust system reduce the escape time to 185 seconds. Also, near the fire source temperature decreased by about $60^{\circ}C$. Without the exhaust system, fire propagation speed was in the range of 0.36 and 0.82 m/s, and it dropped to $0.27\~0.58\;m/s$ with the exhaust system on. Taking into account the escape speed of tunnel users, usually $0.7\~1.0\;m/s$, the emergency exit built every 150m is sufficient for the safe egress. The ultimate goal of this study is to provide fundamental information for the smoke exhaust system in bidirectional tunnels.

• Journal of the Korean Society of Radiology
• /
• v.11 no.3
• /
• pp.123-129
• /
• 2017

Compton suppression apparatus using the Compton scattering response, by inhibiting part of the spectrum Compton continuum Compton continuum in the area of the peak analysis of the gamma rays that enables a clearer device. In order to find out the geometry structure of high-purity germanium detector(HPGe) -NaI(TI) and to optimize the effect of movement, Monte Carlo simulation was used to grasp the behavioral characteristics of Compton suppression and compare several layout structures. And applied to the cylinder beaker used for the environmental measurement by using the efficiency according to the distance. For the low-energy source such as 81 keV, the Compton continuum is scarcely developed and the suppression effect is also insignificant because the scattering cross-section of the Compton effect is relatively low. In the spectrum for the remaining energy, it can be seen that the Compton continuum part is suppressed in a certain energy range. Compton suppression effect was not significantly different from positional shift. average reduction factor(ARF) value was about 1.08 for 81 keV and about 1.23 for 1332.4keV energy at the highest value. It can be seen that suppression over the Compton continuum region of the energy spectrum is a more appropriate arrangement. Therefore, it can be applied to various environmental sample measurement through optimized structure.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.29-29
• /
• 2009

On this research, laser welding technology for manufacturing automobile body is studied. Laser welding technology is one of the important technologies used in the manufacturing of lighter, safer automotive bodies at a high level of productivity; the leading automotive manufacturers have replaced spot welding with laser welding in the process of car body assembly. Korean auto manufacturers are developing and applying the laser welding technology using a high output power Nd:YAG laser and a 6-axes industrial robot. On the other hand, the robot-based remote laser welding system was equipped with a long focal laser scanner system in robotic end effect. Laser system, robot system, and scanner system are used for realizing the high speed laser welding system. The remote laser welding system and industrial robotic system are used to consist of robot-based remote laser welding system. The robot-based remote laser welding system is flexible and able to improve laser welding speed compared with traditional welding as spot welding and laser welding. The robot-based remote laser systems used in this study were Trumpf's 4kW Nd:YAG laser (HL4006D) and IPG's 1.6kW Fiber laser (YLR-1600), while the robot systems were of ABB's IRB6400R (payload:120kg) and Hyundai Heavy Industry's HX130-02 (payload:130kg). In addition, a study of quality evaluation and monitoring technology for the remote laser welding was conducted. The welding joints of steel plate and steel plate coated with zinc were butt and lapped joints. The quality testing of the laser welding was conducted by observing the shape of the beads on the plate and the cross-section of the welded parts, analyzing the results of mechanical tension test, and monitoring the plasma intensity and temperature by using UV and IR detectors. Over the past years, Trumf's 4kW Nd:YAG laser and ABB's IRB6400R robot system was used. Nowadays, the new laser source, robot and laser scanner system are used to increase the processing speed and to improve the efficiency of processes. This paper proposes the robot-based remote laser welding system as a means of resolving the limited welding speed and accuracy of conventional laser welding systems.

• Information Systems Review
• /
• v.4 no.2
• /
• pp.111-131
• /
• 2002

Strategic information systems assist organization with the significant opportunity to gain competitive advantage in executing its business plans and realizing its business goals. The universities establish long-range plan of information systems in an effort to provide just-in-time, useful, efficient and effective information services to their members such as professors, students, and staffs when carrying out various organizational activities. The university information systems started from the primitive computer-based application, extended to the administrative and educational e-transformation, even to the virtual university concept. Through an empirical analysis and complementary case examples, the current study carefully chose three Korean universities according to their chronological importance, that have undergone the information systems planning process years from 1995 to 2001. These universities then, were compared in terms of the information technology architecture: the information architecture, infra architecture, and information management architecture. These three areas of system were cross-examined under the consideration of the evolution of information technology architecture, and its impact on the development of university e-transformation. As part of a fulfillment plan to satisfy the needs of customers of current trend, it is evident that the university e-transformation provides a stepladder to highly competitive, first class university in the market, through achieving the educational advancement, research enhancement, and administrative efficiency. The result of the study analysis indicates that, of the three architectures examined, the weakness showed in the information management architecture. Therefore it is crucial for the university staffs, managers and professors to understand the significance of the successful implementation of the information system and its maintenance. Our study certainly will act as a catalyst for the promotion of the future university e-transformation projects.

• Journal of Internet Computing and Services
• /
• v.19 no.1
• /
• pp.67-76
• /
• 2018

This paper addresses the problem of efficient processing of region monitoring queries. The centralized methods used for existing region monitoring query processing assumes that the mobile object periodically sends location-updates to the server and the server continues to update the query results. However, a large amount of location updates seriously degrade the system performance. Recently, some distributed methods have been proposed for region monitoring query processing. In the distributed methods, the server allocates to all objects i) a resident domain that is a subspace of the workspace, and ii) a number of nearby query regions. All moving objects send location updates to the server only when they leave the resident domain or cross the boundary of the query region. In order to allocate the resident domain to the moving object along with the nearby query region, we use a query index structure that is constructed by splitting the workspace recursively into equal halves. However, However, the above index structure causes unnecessary division, resulting in deterioration of system performance. In this paper, we propose an adaptive split method to reduce unnecessary splitting. The workspace splitting is dynamically allocated i) considering the spatial relationship between the query region and the resultant subspace, and ii) the distribution of the query region. We proposed an enhanced QR-tree with a new splitting method. Through a set of simulations, we verify the efficiency of the proposed split methods.