• 한국농림기상학회지
• /
• 제4권4호
• /
• pp.203-212
• /
• 2002

주로 도시에 소재하는 표준기상관측소 자료의 공간 내삽에 의해 일 최저기온의 평년값을 추정할 때, 도시 열섬효과의 전이에 의해 전원지역에서 과다추정 되는 오류를 수정하기 위해 본 연구를 수행하였다. 도시열섬효과의 공간적인 확산을 모의하기 위해 먼저 불연속적인 변량인 시군 행정구역단위 인구를 지표피복도 상의 시가지 픽셀에만 할당하여 규칙적인 격자점 단위의 평균인구로 변환함으로써 연속적인 변량인 수치인구모형(DPM)으로 표현하였다. 다섯 가지 평활화 DPM 가운데 최적으로 판명된 사방 2.5 km DPM과 기온추정 오차간 회귀식을 기존의 거리-고도 보정 내삽과정에 결합하였다. 이 방법을 적용하여 추정된 평년(1971-2000) 월별 일 최저기온의 추정오차는 기존방법에 비해 최소 50%가 개선되었다.

• Journal of Biosystems Engineering
• /
• 제37권3호
• /
• pp.166-176
• /
• 2012

Purpose: This study was conducted to investigate the potential of interactance mode of NIR spectroscopy technology for the estimation of soluble solids content (SSC) and firmness of muskmelons. Methods: Melon samples were taken from local greenhouses in three different harvesting seasons (experiments 1, 2, and 3). The fruit attributes were measured at the 6 points on an equator of each sample where the spectral data were collected. The prediction models were developed using the original spectral data and the spectral data sets preprocessed by 20 methods. The performance of the models was compared. Results: In the prediction of SSC, the highest coefficient of determination ($R_{cv}{^2}$) values of the cross-validation was 0.755 (standard error of prediction, SEP=$0.89^{\circ}Brix$) with the preprocessing of normalization with range in experiment 1. The highest coefficient of determination in the robustness tests, $R_{rt}{^2}$=0.650 (SEP=$1.03^{\circ}Brix$), was found when the best model of experiment 3 was evaluated with the data set of experiment 2. The best $R_{cv}{^2}$ for the prediction of firmness was 0.715 (SEP=3.63 N) when no preprocessing was applied in experiment 1. The highest $R_{rt}{^2}$ was 0.404 (SEP=5.30 N) when the best model of experiment 3 was applied to the data set of experiment 1. Conclusions: From the test results, it can be concluded that the interactance mode of VIS/NIR spectroscopy technology has a great potential to measure SSC and firmness of thick-skinned muskmelons.

• 대한의용생체공학회:의공학회지
• /
• 제37권5호
• /
• pp.161-167
• /
• 2016

Recent technological advances in sensor fabrication and bio-signal processing enabled non-constraint and non-intrusive measurement of human bio-signals. Especially, non-constraint measurement of ECG makes it available to estimate various human health parameters such as heart rate. Additionally, non-constraint ECG measurement of wheelchair user provides real-time health parameter information for emergency response. For accurate emergency response with low false alarm rate, it is necessary to discriminate quality levels of ECG measured using non-constraint approach. Health parameters acquired from low quality ECG results in inaccurate information. Thus, in this study, a machine learning based approach for three-class classification of ECG quality level is suggested. Three sensors are embedded in the back seat, chest belt, and handle of automatic wheelchair. For the two sensors embedded in back seat and chest belt, capacitively coupled electrodes were used. The accuracy of quality level classification was estimated using Monte Carlo cross validation. The proposed approach demonstrated accuracy of 94.01%, 95.57%, and 96.94% for each channel of three sensors. Furthermore, the implemented algorithm enables classification of user posture by detection of contacted electrodes. The accuracy for posture estimation was 94.57%. The proposed algorithm will contribute to non-constraint and robust estimation of health parameter of wheelchair users.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제35권4호
• /
• pp.265-279
• /
• 2008

손 제스처를 이용한 사람과 컴퓨터간의 상호 작용은 오랜 기간 많은 사람들이 연구해 오고 있으며 커다란 발전을 보이고 있지만, 여전히 만족스러운 결과를 보이지는 못하고 있다. 본 논문에서는 동적 베이스망 프레임워크를 이용한 손 제스처 인식 방법을 제안한다. 유선 글러브를 이용하는 방법들과는 달리, 카메라 기반의 방법에서는 영상 처리와 특징 추출 단계의 결과들이 인식 성능에 큰 영향을 미친다. 제안하는 제스처 모델에서의 추론에 앞서 피부 색상 모델링 및 검출과 움직임 추적을 수행한다. 특징들간의 관계와 새로운 정보들을 쉽게 모델에 반영할 수 있는 동적 베이스망을 이용하여 두 손 제스처와 한 손 제스처 모두를 인식할 수 있는 새로운 모델을 제안한다. 10가지 독립 제스처에 대한 실험에서 최대 99.59%의 높은 인식 성능을 보였다. 제안하는 모델과 관련 방법들은 수화 인식과 같은 다른 문제들에도 적용 가능할 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제21권2호
• /
• pp.359-365
• /
• 2020

한방병원에 건강검진을 목적으로 내원한 732명의 피험자를 대상으로 사상체질감별설문지 검사를 통하여 한의사가 감별한 사상체질 결과와 맥진기를 사용하여 촌, 관, 척 부위의 요골 맥파를 측정한 자료를 입수하였다. 입수한 맥파 자료로부터 맥파의 폭, 피크의 크기와 개수를 특징 변수로 추출했다. 특징 변수들 중 타당도와 신뢰도가 높은 것들을 판별변수로 선정했다. 5겹 교차 검증법을 적용하여, 맥파 자료를 사상체질을 알려주는 훈련 표본과 사상체질을 알려주지 않는 예측 표본으로 구분했다. 훈련 표본에 대해서 판별분석을 수행하여 판별 함수를 구한 후, 이것을 예측 표본에 적용하여 사상체질을 예측했다. 예측한 사상체질과 설문지 검사로 알고 있는 사상체질을 비교하여 사상체질 분류 정확도를 계산했다. 사상체질 분류 정확도는 나이별, 성별 보정 전에는 태음인: 73.6 %, 소음인: 68.4 %, 소양인: 74.2 %이었으며, 전체 분류 정확도는 72.5 %이었다. 한국 인구를 기반으로 한 성별, 나이별 가중치를 적용하여 보정을 한 후의 사상체질 분류 정확도는 태음인(70.4 %), 소음인(84.2 %), 소양인(67.7 %)이었으며, 전체 분류 정확도는 73.8 %이었다.

• Structural Engineering and Mechanics
• /
• 제74권4호
• /
• pp.457-470
• /
• 2020

The force resisting ability of a connection has direct implications on the overall response of a timber framed structure to various actions, thereby governing the integrity and safety of such constructions. The behavior of timber framed structures has been studied by many researchers by testing full-scale-connections in timber frames so as to establish consistent design provisions on the same. However, much emphasis in this approach has been unidirectional, that has focused on a particular connection configuration, with no research output stressing on the refinement of the existing connection details in order to optimize their performance. In this regard, addition of adhesive to dowelled timber connections is an economically effective technique that has a potential to improve their performance. Therefore, a comparative study to evaluate the performance of various full-scale timber frame Nailed connections (Bridled Tenon, Cross Halved, Dovetail Halved and Mortise Tenon) supplemented by adhesive with respect to Nailed-Only counterparts under tensile loading has been investigated in this paper. The load-deformation values measured have been used to calculate stiffness, load capacity and ductility in both the connection forms (with and without adhesion) which in turn have been compared to other configurations along with the observed failure modes. The observed load capacity of the tested models has also been compared to the design strengths predicted by National Design Specifications (NDS-2018) for timber construction. Additionally, the experimental behavior was validated by developing non-linear finite element models in ABAQUS. All the results showed incorporation of adhesive to be an efficient and an economical technique in significantly enhancing the performance of various timber nailed connections under tensile action. Thus, this research is novel in a sense that it not only explores the tensile behavior of different nailed joint configurations common in timber construction but also stresses on improvising the same in a logical manner hence making it distinctive in its approach.

• Environmental Engineering Research
• /
• 제21권4호
• /
• pp.333-340
• /
• 2016

An Artificial Neural Network including a Radial Basis Function (RBF) and a Time Delay Neural Network (TDNN) was used to predict total dissolved solid (TDS) in the river Zayanderud. Water quality parameters in the river for ten years, 2001-2010, were prepared from data monitored by the Isfahan Regional Water Authority. A factor analysis was applied to select the inputs of water quality parameters, which obtained total hardness, bicarbonate, chloride and calcium. Input data to the neural networks were pH, $Na^+$, $Mg^{2+}$, Carbonate ($CO{_3}^{-2}$), $HCO{_3}^{-1}$, $Cl^-$, $Ca^{2+}$ and Total hardness. For learning process 5-fold cross validation were applied. In the best situation, the TDNN contained 2 hidden layers of 15 neurons in each of the layers and the RBF had one hidden layer with 100 neurons. The Mean Squared Error and the Mean Bias Error for the TDNN during the training process were 0.0006 and 0.0603 and for the RBF neural network the mentioned errors were 0.0001 and 0.0006, respectively. In the RBF, the coefficient of determination ($R^2$) and the index of agreement (IA) between the observed data and predicted data were 0.997 and 0.999, respectively. In the TDNN, the $R^2$ and the IA between the actual and predicted data were 0.957 and 0.985, respectively. The results of sensitivity illustrated that $Ca^{2+}$ and $SO{_4}^{2-}$ parameters had the highest effect on the TDS prediction.

• Journal of Pharmaceutical Investigation
• /
• 제35권1호
• /
• pp.45-50
• /
• 2005

The purpose of the present study was designed to evaluate the bioequivalence of two ofloxacin tablets, Tarivid (Jeil Pharm. Co., Ltd.) and Favid (ILHWA Co., Ltd.), according to the guidelines of Korea Food and Drug Administration (KFDA). Twenty-four normal male volunteers, $23.67{\pm}3.12$ year in age and $68.50{\pm}7.23$ kg in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After four tablets containing 100 mg of ofloxacin were orally administered, blood was taken at predetermined time intervals and concentrations of ofloxacin in plasma were determined using HPLC. Pharmacokinetic parameters such as $AUC_t$, $C_{max}$ and $T_{max}$ were calculated and ANOVA test was utilized for the statistical analysis of the parameters using logarithmically transformed $AUC_t$ and $C_{max}$ and untransformed $T_{max}$. There were no sequence effects between two formulations in these parameters. The 90% confidence intervals for the log transformed data were acceptance range of log 0.8 to log 1.25 (e.g., $log0.94{\sim}log1.04\;and\;log0.90{\sim}log1.07\;for\;AUC_t\;and\;C_{max}$, respectively). The major parameters, $AUC_t$, and $C_{max}$, met the criteria of KDFA for bioequivalence indicating that Favid tablet is bioequivalent to Tarivid tablet.

• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.161-183
• /
• 2017

This paper investigates the damage identification of the concrete pile element through axial wave propagation technique using computational and experimental studies. Now-a-days, concrete pile foundations are often common in all engineering structures and their safety is significant for preventing the failure. Damage detection and estimation in a sub-structure is challenging as the visual picture of the sub-structure and its condition is not well known and the state of the structure or foundation can be inferred only through its static and dynamic response. The concept of wave propagation involves dynamic impedance and whenever a wave encounters a changing impedance (due to loss of stiffness), a reflecting wave is generated with the total strain energy forked as reflected as well as refracted portions. Among many frequency domain methods, the Spectral Finite Element method (SFEM) has been found suitable for analysis of wave propagation in real engineering structures as the formulation is based on dynamic equilibrium under harmonic steady state excitation. The feasibility of the axial wave propagation technique is studied through numerical simulations using Elementary rod theory and higher order Love rod theory under SFEM and ABAQUS dynamic explicit analysis with experimental validation exercise. Towards simulating the damage scenario in a pile element, dis-continuity (impedance mismatch) is induced by varying its cross-sectional area along its length. Both experimental and computational investigations are performed under pulse-echo and pitch-catch configuration methods. Analytical and experimental results are in good agreement.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권6호
• /
• pp.830-836
• /
• 2003

The classical energy balance method was used to measure the apparent metabolisable energy (AME) of four batches of broiler starter and finisher diets produced by two commercial feed companies. The results showed there was little variation in protein content between batches, but NDF content varied from 13.3% to 15.5% between batches of diet. The batch variation in chemical composition differed between feed manufacturers. While there was no difference in AME and feed conversion ration (FCR) between batches of starter diets produced by company A, FCR and AME ranged from 1.76-1.94 (p<0.001) and 11.38-11.90 MJ/kg air dry (p<0.05), respectively, for diets produced by company B. Similar results were found in a second experiment. There was no difference in AME, dry matter digestibility (DMD) and FCR between batches for finishing diet produced by company B, but a large variation occurred for the finisher diets from company A (p<0.01), where the ranges of FCR, AME and DMD were 1.95-2.30, 10.5-12.3 (MJ/kg air dry) and 58-68%, respectively. FCR was correlated with AME. AME was negatively related to the content of fibre in the diet, but positively related to DMD. The preliminary results based on 24 samples showed that near infrared spectroscopy (NIR) has the potential to predict FCR, intake, AME and DMD of commercial broiler diets, with $R^2$ being 0.93, 0.89, 0.95 and 0.98, respectively. The standard error of cross validation was below 0.2 for AME and only 0.06 for FCR.