• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.327-333
• /
• 1998

The influence of slow cooling and annealing time in $O_2$in MPEG process on $J_c$ was investigated. From the measurement of $J_c$,SEM and XRD, it was observed that the critical current density was related with the slow cooling time and annealing time in $O_2$. The value of $J_c$ was the highest at slow cooling time of 40 hour. And also, the value of $J_c$ along the annealing time in $O_2$in the case of the slow cooling time of 40 hours was inclined to increase with annealing time. Consequently, it can be suggested that proper slow cooling time and annealing time after slow cooling in MPMG process be important to improve the critical characteristics.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.112-119
• /
• 1995

Early fracture and cutting force of ceramic tool for hardened STC3 steel was investigated in this study. It was found that early fracture of ceramic tool was mostly occurred before normal wear was progressed beyond a critical cutting speed and normal wear was performed under the critical cutting speed. The relationships among critical cutting speed, which was a cause of early fracture, suggested cutting cross section, that is, maximum thickness of cut and width of cut, and cutting force were examined. The following conclusions were obtained: (1)Critical cutting speed showed a high value in the case of small maximum thickness of cut and large nose radius, but was not influenced by width of cut, (2)Principal, feed and radial force, respectively, showed the proportional value to constant cutting area, width of cut and maximum thickness of cut orderly, (3)Occurrence of early fracture was dependent upon radial force.

• 융합신호처리학회논문지
• /
• 제2권4호
• /
• pp.59-64
• /
• 2001

본 논문에서는 이동하는 스테레오 카메라의 폭주개산 운동에 의한 물체의 위치 추정을 위하여 제로 시차영역 분할법의 문제점을 해결하는 방법과 양안시차를 추출하는 알고리즘을 제안하고 비교 실험하였다. 기존에는 모든 소영역에 대한 임계치를 일정하게 하기 위하여 농도값의 변화가 심한 영역에서는 높은 임계치로 맞추었기 때문에 특징이 거의 없는 영역에 농도값의 변화가 거의 없게 되어 대응점이 잘못추출되었다. 그러나 본 논문에서는 소영역의 특징을 자기 상관에 의하여 평가하고 그 값에 비례한 임계치로 설정하였기 때문에 대응점이 거의 잘못 추출되지 않았으며, 양안시차를 고속으로 추출할 수 있음을 확인하였다.

• 한국화재소방학회논문지
• /
• 제20권2호
• /
• pp.80-86
• /
• 2006

본 고찰은 화재시 고강도 콘크리트의 주요 이슈 중의 하나인 폭열 현상에 초점을 맞추어 폭열의 정의, 분류 및 각각의 특징, 발생원인과 그 반응기구에 대하여 선행연구를 중심으로 분석하였다. 폭열은 급격한 온도 상승, 높은 수분 함유량, 낮은 물시멘트비(W/C), 콘크리트 내에 국부적인 높은 응력 발생 등과 같은 요인이 복합적으로 작용하여 발생한다. 이러한 요인을 토대로 폭열을 방지하기 위한 방법으로 크게 콘크리트의 온도 상승을 억제하는 방법, 콘크리트의 비산을 억제하는 방법, 그리고 빠르게 내부 수분을 건조시키는 방법 등을 들 수 있다. 본 고찰에서는 이러한 방법 가운데 가장 효율적인 폭열 방지 방안으로서 콘크리트 내부의 수분을 빠르게 건조시킴으로써 폭열에 이르게 하는 함수율 이하로 낮추어서 콘크리트 자체의 내폭열성을 높이는 방안을 고찰하였다. 실제 강제건조를 통해 함수율을 어떤 임계치(critical value) 이하로 낮추게 되면 폭열을 방지할 수 있으며 이를 위해서는 수동적인 자연건조 외에 강제건조 등으로 함수율을 낮출 필요가 있을 것이다. 이러한 임계치 결정을 위해 추가적인 많은 실험 및 자료가 도출되어야 할 것이다.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.79-84
• /
• 2008

We are developing a small-sized high temperature superconducting magnetic energy storage (HTS-SMES) magnet with the nominal storage capacity of 600 kJ, which provides electric power with high quality to sensitive electric loads. Critical current and N-value of a high temperature superconductor with large current, which was selected for the development of the 600 kJ HTS-SMES magnet, were investigated in various oblique external magnetic fields. Based on the critical current and N-value measured for the short sample conductor, we discussed the DC V - I characteristic of a model coil fabricated with the same conductor of 500 m. The results show that the measured critical current and N-value of the conductor for parallel field are constant in external magnetic fields less than about 0.2 T. However, for oblique fields, its critical current and N -value abruptly decrease in all external magnetic fields. Moreover, the measured critical current of the model coil well agrees with the numerically calculated one based on the DC V - I characteristic measured for the short sample conductor. This suggest that losses and critical currents for an HTS-SMES magnet made up of a high temperature superconductor with anisotropic characteristic are predictable from the data of a short sample conductor.

• Structural Engineering and Mechanics
• /
• 제48권3호
• /
• pp.367-382
• /
• 2013

Different types of long slender pile shall buckle with weak soil and liquefied stratum surrounded. Different from considering single side earth pressure, it was suggested that the lateral earth pressure can be divided into two categories while buckling: the earth pressure that prevent and promotes the lateral movement. Active and passive earth pressure calculation model was proposed supposing earth pressure changed linearly with displacement considering overlying load, shaft resistance, earth pressure at both sides of the pile. Critical buckling load calculation method was proposed based on the principle of minimum potential energy quoting the earth pressure calculation model. The calculation result was contrasted with the field test result of small diameter TC pile (Plastic Tube Cast-in-place pile). The fix form could be fixed-hinged in the actual calculation assuring the accuracy and certain safety factor. The contributions of pile fix form depend on the pile length for the same geological conditions. There exists critical friction value in specific geological conditions that the side friction has larger impact on the critical buckling load while it is less than the value and has less impact with larger value. The buckling load was not simply changed linearly with friction. The buckling load decreases with increased limit active displacement and the load tend to be constant with larger active displacement value; the critical buckling load will be the same for different fix form for the small values.

• Korean Journal of Mathematics
• /
• 제26권1호
• /
• pp.9-21
• /
• 2018

We investigate existence and multiplicity of the solutions for elliptic boundary value problem with two singularities. We obtain one theorem which shows that there exists at least one nontrivial weak solution under some conditions on which the corresponding functional of the problem satisfies the Palais-Smale condition. We obtain this result by variational method and critical point theory.

• Journal of applied mathematics & informatics
• /
• 제37권5_6호
• /
• pp.399-410
• /
• 2019

In the manuscript, we concern with the existence of solutions of boundary value problems for fourth order nonlinear discrete systems. Some criteria for the existence of at least one nontrivial solution of the problem are obtained. The proof is mainly based upon the variational method and critical point theory. An example is presented to illustrate the main result.

• Steel and Composite Structures
• /
• 제37권4호
• /
• pp.463-479
• /
• 2020

Currently, there are many lateral resisting systems utilized in resisting lateral loads being produced in an earthquake. Such systems can significantly reduce the roof's displacement when placed at an optimum location. Since in the design of tall buildings, the minimum distance between adjacent buildings is important. In this paper, the critical excitation method is used to determine the best location of the belt truss system while calculating the minimum required distance between two adjacent buildings. For this purpose, the belt truss system is placed at a specific story. Then the critical earthquakes are computed so that the considered constraints are satisfied, and the value of roof displacement is maximized. This procedure is repeated for all stories; i.e., for each, a critical acceleration is computed. From this set of computed roof displacement values, the story with the least displacement is selected as the best location for the belt truss system. Numerical studies demonstrate that absolute roof displacements induced through critical accelerations range between 5.36 to 1.95 times of the San Fernando earthquake for the first example and 7.67 to 1.22 times of the San Fernando earthquake for the second example. This method can also be used to determine the minimum required distance between two adjacent buildings to eliminate the pounding effects. For this purpose, this value is computed based on different standard codes and compared with the results of the critical excitation method to show the ability of the proposed method.

• 한국의류산업학회지
• /
• 제24권5호
• /
• pp.530-544
• /
• 2022

Based on a follow-up study on critical fashion's strategies for object appropriation, this study aims to understand the appropriation of art as a social or cultural phenomenon influencing modern fashion, as well as to analyze and comprehend how to specifically approach the appropriation of critical fashion's letters through the appropriated interpretation. To explain the theoretical background of critical fashion's appropriated interpretation, it examined the related literature and data. Moreover, a fashion book-based literature review and a case study were conducted using sources, such as exhibition books, exhibited works, news, fashion magazines, and fashion sites, to examine letter appropriation strategies. In the critical fashion, the appropriation of subversive letters subverts meanings by providing experiences different from those based on real images of letters, which are displaceable. The appropriation of such subversive letters to challenge the value of modernism aims to subvert social value by bringing and relocating existing objects while focusing on their external forms. The appropriation of referential letters focuses on delineating the distance between the subjects who quote something and the quoted something and reprograms the existing letter objects with an introspective and reflective attitude. In other words, critical fashion designers can effectively express their messages through the appropriation of letters, such as graffiti and typography, which are manifestations of challenge or resistance. Appropriating letters as a creative action pursues unmarginalized humans who possess their existence.