• Asia pacific journal of information systems
• /
• 제20권2호
• /
• pp.63-86
• /
• 2010

Personalized services directly and indirectly acquire personal data, in part, to provide customers with higher-value services that are specifically context-relevant (such as place and time). Information technologies continue to mature and develop, providing greatly improved performance. Sensory networks and intelligent software can now obtain context data, and that is the cornerstone for providing personalized, context-specific services. Yet, the danger of overflowing personal information is increasing because the data retrieved by the sensors usually contains privacy information. Various technical characteristics of context-aware applications have more troubling implications for information privacy. In parallel with increasing use of context for service personalization, information privacy concerns have also increased such as an unrestricted availability of context information. Those privacy concerns are consistently regarded as a critical issue facing context-aware personalized service success. The entire field of information privacy is growing as an important area of research, with many new definitions and terminologies, because of a need for a better understanding of information privacy concepts. Especially, it requires that the factors of information privacy should be revised according to the characteristics of new technologies. However, previous information privacy factors of context-aware applications have at least two shortcomings. First, there has been little overview of the technology characteristics of context-aware computing. Existing studies have only focused on a small subset of the technical characteristics of context-aware computing. Therefore, there has not been a mutually exclusive set of factors that uniquely and completely describe information privacy on context-aware applications. Second, user survey has been widely used to identify factors of information privacy in most studies despite the limitation of users' knowledge and experiences about context-aware computing technology. To date, since context-aware services have not been widely deployed on a commercial scale yet, only very few people have prior experiences with context-aware personalized services. It is difficult to build users' knowledge about context-aware technology even by increasing their understanding in various ways: scenarios, pictures, flash animation, etc. Nevertheless, conducting a survey, assuming that the participants have sufficient experience or understanding about the technologies shown in the survey, may not be absolutely valid. Moreover, some surveys are based solely on simplifying and hence unrealistic assumptions (e.g., they only consider location information as a context data). A better understanding of information privacy concern in context-aware personalized services is highly needed. Hence, the purpose of this paper is to identify a generic set of factors for elemental information privacy concern in context-aware personalized services and to develop a rank-order list of information privacy concern factors. We consider overall technology characteristics to establish a mutually exclusive set of factors. A Delphi survey, a rigorous data collection method, was deployed to obtain a reliable opinion from the experts and to produce a rank-order list. It, therefore, lends itself well to obtaining a set of universal factors of information privacy concern and its priority. An international panel of researchers and practitioners who have the expertise in privacy and context-aware system fields were involved in our research. Delphi rounds formatting will faithfully follow the procedure for the Delphi study proposed by Okoli and Pawlowski. This will involve three general rounds: (1) brainstorming for important factors; (2) narrowing down the original list to the most important ones; and (3) ranking the list of important factors. For this round only, experts were treated as individuals, not panels. Adapted from Okoli and Pawlowski, we outlined the process of administrating the study. We performed three rounds. In the first and second rounds of the Delphi questionnaire, we gathered a set of exclusive factors for information privacy concern in context-aware personalized services. The respondents were asked to provide at least five main factors for the most appropriate understanding of the information privacy concern in the first round. To do so, some of the main factors found in the literature were presented to the participants. The second round of the questionnaire discussed the main factor provided in the first round, fleshed out with relevant sub-factors. Respondents were then requested to evaluate each sub factor's suitability against the corresponding main factors to determine the final sub-factors from the candidate factors. The sub-factors were found from the literature survey. Final factors selected by over 50% of experts. In the third round, a list of factors with corresponding questions was provided, and the respondents were requested to assess the importance of each main factor and its corresponding sub factors. Finally, we calculated the mean rank of each item to make a final result. While analyzing the data, we focused on group consensus rather than individual insistence. To do so, a concordance analysis, which measures the consistency of the experts' responses over successive rounds of the Delphi, was adopted during the survey process. As a result, experts reported that context data collection and high identifiable level of identical data are the most important factor in the main factors and sub factors, respectively. Additional important sub-factors included diverse types of context data collected, tracking and recording functionalities, and embedded and disappeared sensor devices. The average score of each factor is very useful for future context-aware personalized service development in the view of the information privacy. The final factors have the following differences comparing to those proposed in other studies. First, the concern factors differ from existing studies, which are based on privacy issues that may occur during the lifecycle of acquired user information. However, our study helped to clarify these sometimes vague issues by determining which privacy concern issues are viable based on specific technical characteristics in context-aware personalized services. Since a context-aware service differs in its technical characteristics compared to other services, we selected specific characteristics that had a higher potential to increase user's privacy concerns. Secondly, this study considered privacy issues in terms of service delivery and display that were almost overlooked in existing studies by introducing IPOS as the factor division. Lastly, in each factor, it correlated the level of importance with professionals' opinions as to what extent users have privacy concerns. The reason that it did not select the traditional method questionnaire at that time is that context-aware personalized service considered the absolute lack in understanding and experience of users with new technology. For understanding users' privacy concerns, professionals in the Delphi questionnaire process selected context data collection, tracking and recording, and sensory network as the most important factors among technological characteristics of context-aware personalized services. In the creation of a context-aware personalized services, this study demonstrates the importance and relevance of determining an optimal methodology, and which technologies and in what sequence are needed, to acquire what types of users' context information. Most studies focus on which services and systems should be provided and developed by utilizing context information on the supposition, along with the development of context-aware technology. However, the results in this study show that, in terms of users' privacy, it is necessary to pay greater attention to the activities that acquire context information. To inspect the results in the evaluation of sub factor, additional studies would be necessary for approaches on reducing users' privacy concerns toward technological characteristics such as highly identifiable level of identical data, diverse types of context data collected, tracking and recording functionality, embedded and disappearing sensor devices. The factor ranked the next highest level of importance after input is a context-aware service delivery that is related to output. The results show that delivery and display showing services to users in a context-aware personalized services toward the anywhere-anytime-any device concept have been regarded as even more important than in previous computing environment. Considering the concern factors to develop context aware personalized services will help to increase service success rate and hopefully user acceptance for those services. Our future work will be to adopt these factors for qualifying context aware service development projects such as u-city development projects in terms of service quality and hence user acceptance.

• 마케팅과학연구
• /
• 제18권4호
• /
• pp.119-155
• /
• 2008

최근 많은 기업들이 치열한 경쟁에서 생존하기 위해 개별 고객들에게 초점을 맞춘 전사적이고 체계적인 고객관계관리에 전력을 기울이고 있다. 수익성 높은 대부분 기업들의 성공비결은 복합적이겠지만, 고객지향적 사고에의 신속한 적응이 중요한 부분을 차지하고 있다. 고객관계관리 기법 및 운용철학은 고객을 올바르게 이해하는데서 그치지 않고 고객행동을 사전적으로 예측하여 고객요구에 부응한 제품과 서비스를 제공하는 것만이 치열한 경쟁환경에서 생존함과 동시에 거듭된 성장을 이루는 유일한 해결책임을 강조한다. 고객관계관리는 데이터베이스마케팅과 같은 조직내 실무자 중심의 관점과 접근이 아니라 최고경영자의 마케팅 관점의 경영철학 구현을 통한 전사적이고 조직적인 참여가 이루어져야 한다. 그럼에도 불구하고 많은 기업들이 고객관계관리 기법을 도입하고 구축하는 과정에서 이러한 점을 간과해 왔으며 그 결과, 고객관계관리를 통해 수익성을 높인 기업이 있는 반면에 고객관계관리에 엄청난 비용만을 투입하고 별다른 성과를 거두지 못한 기업들도 다수이다. 본 연구는 CRM구축 및 실행과정에서의 성공요인을 기존 연구와 달리 마케팅적 관점에서 발견해 내고 있다. 시장지향성과 고객지향성이라는 마케팅 철학에서부터 고객정 보지향성과 핵심고객지향이라는 실무적 개념까지 포함해서 마케팅적인 관점에서의 성공적 CRM구축을 위한 선행요인을 발견하고, 이러한 요인들이 마케팅관점의 관계품질과 실무적인 CRM성과에 어떤 영향을 미치는지를 분석함과 동시에 관계품질과 CRM성과 간의 관계의 강도까지 실증적으로 분석해 보았다. 경험적 분석 결과 본 연구에서 구축한 마케팅관점의 CRM선행요인들 중에서 일부 요인을 제외하고는 대체적으로 관계품질 및 CRM성과를 높이는데 상당한 기여를 하고 있음이 확인되었으며, 영향관계의 정도에는 어느 정도 차이가 있음이 확인되었다. 또한 관계품질과 CRM성과 및 세부적 개념구성요인들 간에 매우 높은 정(+)의 관계가 존재함을 확인했다. 이는 CRM의 최종 성과를 달성하기 위해서 CRM구축 및 실행이후에 고객만족과 고객신뢰라는 개념적 연결고리를 강화함과 동시에 이러한 관계품질이 고객유지와 고객점유 정도의 향상으로 이어지도록 하는 창조적 전술개발이 요구됨을 의미한다. CRM을 구축 및 실행하는 대부분의 기업들이 조급하게 재무적인 성과를 기대하는 경향이 있는데, CRM은 마케팅철학을 포함하는 장기적인 경영활동임을 주지해야 한다. 기존의 많은 연구들이 취하고 있는 연구맥락에 근거해서 기술적인 시스템만을 갖추었다고 하여 단기적인 성과를 바라는 것은 오히려 비용의 낭비만을 초래 할 수 있음에 주목해야 한다. 본 연구결과를 바탕으로 CRM의 성공적 구축을 통해 관계품질을 강화하는 것에 대한 전략적 통찰을 제공함과 동시에 실질적인 CRM성과를 달성하기 위한 마케팅 관점의 연결구조를 어떻게 효율적으로 강화할 수 있을 것인가에 대한 학술적이고 실무적인 시사점을 도출했다.

• 한국가정과교육학회지
• /
• 제24권2호
• /
• pp.117-134
• /
• 2012

본 연구의 목적은 가정과교육에서 창의 인성 교육에 대한 가정과 교사의 관심 단계와 실행 수준, 그리고 실행 실태를 알아보는데 있다. 연구 자료는 전국의 중학교 가정과 교사를 대상으로 체계적 표집과 편의 표집을 하여 우편과 이메일을 통해 설문지를 배포하고 회수된 187부를 최종 분석에 사용하였다. 조사 도구는 주로 Hall(1987)이 개발한 혁신에 대한 교사의 관심도와 실행 수준에 대한 질문지를 수정 보완하여 사용하였고 그 외는 선행연구를 기초하여 개발하였으며 타당도와 신뢰도를 검증하였다. 자료는 SPSS/window(12.0) 프로그램을 이용하여 빈도, 백분율, 평균, 표준편차, t-test, ANOVA를 실시하였다. 본 연구를 통해 밝혀진 결과를 요약하면 다음과 같다. 첫째, 창의 인성 교육에 대한 가정과 교사의 관심 단계는 정보적 관심 단계(85.51)가 가장 높았으며 다음으로 개인적 관심 단계(85.18), 운영적 관심 단계(81.88), 지각적 관심 단계(82.15), 강화적 관심 단계(68.80), 협동적 관심 단계(61.97), 그리고 결과적 관심단계(59.76)의 순으로 나타났다. 둘째, 창의 인성 교육에 대한 가정과 교사의 실행 수준은 기계적 실행 수준(수준 3; 21.4%)이 가장 많았으며, 다음으로 탐색 수준(수준 1; 20.9%), 정교화 수준(수준 5; 17.1%), 사용하지 않는 수준(수준 0; 15.0%), 준비 수준(수준 2; 10.2%), 통합 수준(수준 6; 5.9%), 갱신 수준(수준 7; 4.8%), 일상화 수준(수준 4; 4.8%) 순이었다. 셋째, 창의 인성 교육에 대한 가정과 교사의 실행 실태를 조사한 결과, 반 이상의 가정과 교사(56.1%)는 가정과 수업에서 인성 교육에 치중하고 있으며, 31.0%의 교사는 창의 인성 교육을 모두 실행한다고 응답하였다. 반면 소수의 교사(6.4%)는 창의성 교육을 실행한다고 응답하였고 같은 수의 교사(6.4%)는 창의성과 인성 교육 어느 것도 실행하지 않는다고 응답하였다. 가정과 교사의 창의 인성 교육 요소의 실행 정도를 조사한 결과, 창의 인성 교육 요소의 실행은 평균은 5점 만점에서 3.76이었고 창의성 요소의 평균은 3.59, 인성 요소의 평균은 3.94로 보통보다 높았다. 창의성 교육 요소의 실행 정도에 대해서, 개방성/민감성(3.97)을 가장 많이 실행하였고 다음으로 문제해결능력(3.79), 호기심/흥미(3.73), 비판적 사고(3.68), 논리/분석적 사고(3.63), 문제발견능력(3.61), 독창성(3.57), 유추성(3.47), 유창성/융통성(3.46), 정교성(3.46), 상상력(3.37), 몰입/공감(3.37)의 순으로 실행하였다. 인성 교육 요소는 실천력(4.07)을 가장 많이 실행하였고, 다음으로 협동/배려/공정(4.06), 자기관리능력(4.04), 시민의식(4.04), 진로개발능력(4.03), 환경친화능력(3.95), 책임(감)/소유(3.94), 의사결정능력(3.89), 신뢰/정직/약속(3.88), 자율성(3.86), 글로벌역량(3.55)의 순으로 실행한 것으로 나타났다. 창의 인성 교육을 실행할 때 어려운 점으로, 많은 가정과 교사(64.71%)는 창의 인성 교육을 실행할 수업 자료가 부족한 데 있다고 하였으며, 40.11%의 교사는 창의 인성 교육의 연수 기회가 적은데 있다고 응답하였다. 한편 38.50%의 가정과 교사는 창의 인성 교육에 대한 평가 기준을 설정하거나 평가 도구를 개발하는 것이 어렵다고 응답하였고, 25.67%의 교사는 창의 인성 교육 방법을 모른다고 응답하였다. 창의 인성 교육 실행을 위해서 필요한 지원에 대해서, '창의 인성 교육과 관련된 학생들의 체험활동의 확대'(4.34), '창의성과 인성을 중시하는 가정과 수업 문화 조성'(4.29), '학생 발달 단계에 적합한 창의 인성 교육 내용'(4.27), '창의 인성 교육을 담당할 교수 인력 확보'(4.21), '창의 인성 교육의 개념과 가치 확립'(4.09), '지역 사회 기업 등과 연계한 창의 인성 교육 추진'(3.94)의 순으로 응답하였다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1995년도 제27회 학술발표회
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.